QUICK START GUIDE
EN
Read the Instructions for Use carefully before
using the appliance.
2
3
4
5
6
7
12
X
8
9
10
11
13
14
X
16
18
17
19
1. Control panel
2. Main LED ‘s lighting*
3. Fan
4. Optional lighting in Multi-flow*
5. Shelf divider*
6. Multi-flow cold air area*
7. Bottle rack *
8. Sensor cover
9. Zero degrees drawer*
10. Rating plate with commercial name
11. Cooler compartment(best for meat and fish)*
12. Area shelves
13. Fruits and vegetables crisper
14. Crisper divider*
15. Door reversibility kit*
16. Egg tray*
17. Bottle separator*
18. Door trays
19. Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance,
wait at least 4-6 hours before placing food into the
appliance. When the appliance is connected to the
power supply, the display lights up and all the icons
appear on the display for approximately 1 second.
The default (factory) values of the fridge compartment
settings light-up.
PROFRESH
This function automatically works to ensure the optimal conditions to preserve the stored
food. To deactivate the “ProFresh”, press and hold Fast Cool and Stop Alarm buttons
at the same time for 3seconds until an audible signal sounds and “ProFresh” icon turns
off as confirmation that the feature has been deactivated. To reactivate this function repeat
ON/STANDBY
To put the product in Stand-by, press and hold the
button for 3 seconds. All the icons turn off except On/
Standby indicator . To reactivate the appliance press
once (briefly) this button. (seethe Instructions for Use)
the same procedure.
Note: Deactivation of the function switch-off the FAN in the fridge.
TEMPERATURE DISPLAY
FAN
The Fan improves temperature distribution inside the
product, allowing better preservation of stored food.
By default, the fan is switched on. To switch off the
FAN press and hold Fast Cool and Stop alarm
buttons at the same time for 3 seconds until an audible
signal sounds and “ProFresh” icon will turn off as
confirmation that the fan has been switched off. To switch
on the FAN repeat the same procedure. As a confirmation
audible signal sounds and the icon turns on.
Note: Reasons why switch off the fan look for “ENERGYSAVING TIPS” in the Instructions for Use.
TEMPERATURE button
Press the temperature button to change the temperature:
thevalue changes cyclically between 8°C ad 2°C.
Note: Displayed set points correspond to the average temperature
throughout the whole refrigerator.
VACATION button
This function can be activated to reduce the energy consumption of the appliance during a prolonged period of time.
Before activating the feature, all perishable food should be removed from the refrigeration compartment and make sure that the door is closed properly, since the
refrigerator will maintain asuitable temperature to prevent the formation of unpleasant odors (+12°C). To activate/ deactivate press the Vacation mode button
for 3 seconds.
When the function is enabled, the related symbol will light up and the temperature of the refrigerator compartment will be set to a higher setpoint
(thetemperature display will show the new temperature setpoint of +12°C). Changing the temperature setpoint will automatically deactivate the function.
FAST COOL button
Using Fast Cool function it is possible to increase the cooling
capacity in the refrigerator compartment. The use of this function
is recommended when placing a very high quantity of food in the
refrigerator compartment. Press the Fast Cool button to activate
Fast Cool function. When activated, the Fast Cool indicator turns
on. The function is automatically disabled after 6 hours, or can be
manually disabled by pressing Fast Cool button again.
ALARM indicator
(see the below Alarms Table)
STOP ALARM button
Press in case of alarm to mute the acoustic alarm.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use (Version_2)
Is recommended to reverse door swing by two persons.
There is not foreseen door reversibility for:
- models with integrated handle
- models with glass panel on the door.
Specifications, technical data and images may vary
from model.
ALARMS TABLE
ALARM TYPE Signal Cause Cure
Door open alarm
The acoustical alarm is activated and the Alarm Indicator
blinks.
Malfunction. The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service.
AE
FIDK NO SEFR GB
DE
The door has remained open for more than 2 minutes. Close the door or press the Stop Alarm to mute the acoustical alarm.
Printed in Italy 07/16 - Bauknecht® Registered trademark/TM Trademark of Whirlpool group of companies - © Copyright Whirlpool Europe s.r.l. 2013. All rights reserved - http://www.bauknecht.eu
19514892500