QUICK START GUIDE
Read the Instructions for Use carefully before using the appliance.
1 |
|
2 |
|
3 |
|
4 |
|
5 |
16 |
6 |
|
7 |
18 |
|
|
X |
X |
12 |
|
8 |
17 |
9 |
|
10 |
11 |
13
14 19
15
1.Control panel
2.Main LED ‘s lighting*
3.Fan
4.Optional lighting in Multi-flow*
5.Shelf divider*
6.Multi-flow cold air area*
7.Bottle rack *
8.Sensor cover
9.Zero degrees drawer*
10.Rating plate with commercial name
11.Cooler compartment(best for meat and fish)*
12.Area shelves
13.Fruits and vegetables crisper
14.Crisper divider*
15.Door reversibility kit*
16.Egg tray*
17.Bottle separator*
18.Door trays
19.Door seal
* Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the operation automatically. After starting the appliance, wait at least 4-6 hours before placing food into the appliance. When the appliance is connected to the power supply, the display lights up and all the icons appear on the display for approximately 1 second. The default (factory) values of the fridge compartment settings light-up.
HOW TO REVERSE THE DOOR SWING
- see enclosed Instructions for Use (Version_2)
Is recommended to reverse door swing by two persons. There is not foreseen door reversibility for:
-models with integrated handle
-models with glass panel on the door.
Specifications, technical data and images may vary from model.
PROFRESH |
|
|
|
|
|
ON/STANDBY |
|
|
||
This function automatically works to ensure the optimal conditions to preserve the stored |
To put the product in Stand-by, press and hold the |
|||||||||
food. To deactivate the “ProFresh”, press and hold Fast Cool |
|
|
and Stop Alarm |
|
buttons |
button |
|
for 3 seconds. All the icons turn off except On/ |
||
|
|
|
|
|||||||
at the same time for 3 seconds until an audible signal sounds and “ProFresh” icon |
|
turns |
Standby indicator |
|
. To reactivate the appliance press |
|||||
|
||||||||||
off as confirmation that the feature has been deactivated. To reactivate this function repeat |
once (briefly) this button. (see the Instructions for Use) |
|||||||||
the same procedure. |
|
|
|
|
|
|
|
|
|
|
Note: Deactivation of the function switch-off the FAN in the fridge. |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
TEMPERATURE DISPLAY |
|
FAN |
|
|
|
The Fan improves temperature distribution inside the |
|
|
|
product, allowing better preservation of stored food. |
|
|
|
By default, the fan is switched on. To switch off the |
|
|
|
FAN press and hold Fast Cool |
and Stop alarm |
|
|
buttons at the same time for 3 seconds until an audible |
|
|
|
signal sounds and “ProFresh” icon |
will turn off as |
|
|
confirmation that the fan has been switched off. To switch |
|
|
|
on the FAN repeat the same procedure. As a confirmation |
|
|
|
audible signal sounds and the icon turns on. |
|
|
|
Note: Reasons why switch off the fan look for “ENERGY- |
TEMPERATURE button |
|
|
SAVING TIPS” in the Instructions for Use. |
Press the temperature button |
to change the temperature: |
|
|
|
the value changes cyclically between 8°C ad 2°C. |
|
|
|
Note: Displayed set points correspond to the average temperature |
|
|
|
throughout the whole refrigerator. |
|
VACATION button |
|
|
|
This function can be activated to reduce the energy consumption of the appliance during a prolonged period of time.
Before activating the feature, all perishable food should be removed from the refrigeration compartment and make sure that the door is closed properly, since the refrigerator will maintain a suitable temperature to prevent the formation of unpleasant odors (+12°C). To activate/ deactivate press the Vacation mode button for 3 seconds.
When the function is enabled, the related symbol will light up and the temperature of the refrigerator compartment will be set to a higher setpoint
(the temperature display will show the new temperature setpoint of +12°C). Changing the temperature setpoint will automatically deactivate the function.
|
|
|
|
ALARMS TABLE |
ALARM TYPE |
Signal |
Cause |
||
Door open alarm |
The acoustical alarm is activated and the Alarm Indicator |
|
blinks. |
The door has remained open for more than 2 minutes. |
|
||||
|
||||
Malfunction. |
The letter “F” blinks on the display (°C). |
Product malfunction. |
EN
FAST COOL button |
|
|
|
|
|
|
|
|
||
Using Fast Cool function it is possible to increase the cooling |
|
|||||||||
capacity in the refrigerator compartment. The use of this function |
|
|||||||||
is recommended when placing a very high quantity of food in the |
|
|||||||||
refrigerator compartment. Press the Fast Cool button |
|
|
to activate |
|
||||||
|
|
|
||||||||
Fast Cool function. When activated, the Fast Cool indicator turns |
|
|||||||||
on. The function is automatically disabled after 6 hours, or can be |
|
|||||||||
manually disabled by pressing Fast Cool button |
|
|
again. |
s.r.l. 2013. All rights reserved - http://www.bauknecht.eu |
||||||
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ALARM indicator |
|
|
|
|
|
|
|
|
Europe |
|
|
|
|
|
|
|
|
|
|
|
|
(see the below Alarms Table) |
|
|
|
|
|
|
|
Whirlpool |
|
|
STOP ALARM button |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
Copyright©-companiesofgroupWhirlpoolofTrademarktrademark/TMRegistered |
||
|
Press in case of alarm to mute the acoustic alarm. |
|
|
|
||||||
|
|
|
|
|
||||||
|
|
|
|
Bauknecht®-07/16 |
||||||
Close the door or press the Stop Alarm to mute the acoustical alarm. |
||||||||||
Cure |
|
|
|
|
|
|
|
|
||
Contact the After-sales Service. |
|
|
|
|
|
|
|
in Italy |
||
|
|
|
|
|
|
|
Printed |
|||
|
|
|
|
|
|
|
|
|
|
AE DK FI FR DE NO SE GB |
19514892500 |