BAUKNECHT KGN 316 PROFRESH A WS, KGN 316 PROFRESH A IN Product Sheet

A. Control panel B. Refrigerator Compartment

1. Filter in fan

2. Lighting

3. Shelves / Shelf area

4. Multi-flow cold air system

5. Cooler compartment (best for meat and fish) or "Zero

Degrees" box (to keep foods fresher for longer)

6. Rating plate with commercial name

7. Fruits and vegetables crisper

8. Crisper divider

9. Reversibility kit

10. Egg tray

11. Separator

12. Door trays C. Freezer Compartment

13. Storage baskets for frozen food items

14. Shelves

15. Middle basket (freezing zone)

16. Ice tray and/or cold accumulator

17. Door seals

18. The freezer door trays for pizza or other frozen

products with a short storage time (2** storage compartment)

Anti-bacterial protection (depending on the model):

- Antibacterial filter in the fan (1)

- Antibacterial additives in the Crisper (7)

- Door seals are made of material able to inhibit bacterial growth (17).

Notes:

- Depending on the model the number and type of accessories may vary.

- In case of power failure the cold accumulator helps to keep optimal storage temperature longer.

- All shelves and door trays are removable.

- The internal temperatures of the appliance depend on the ambient temperature, frequency of opening the doors, as well as location of the appliance. Temperature setting must consider these factors.

- The appliance accessories are not suitable for washing in dishwasher.

- After inserting food, ensure that the freezer compartment door closes properly.

TO INCREASE STORAGE

The freezer compartment can be used without the baskets to increase storage and for large products. You can place the food products directly on the racks.

HYDROSENSE SHELVES

(depending of the model)

The special contour of the HydroSense shelves creates a barrier that contain spills and simplifies cleanup, preventing liquids from leaking onto shelves below.

HOW TO START THE APPLIANCE

Fit the spacers (if supplied) on the upper part of the condenser at the rear of the appliance. After plugging the appliance to the mains, it starts the operation automatically. After starting the appliance, wait at least 4-6 hours before placing food into the appliance . Particular control elements are activated:

• The indicator LEDs on the control panels light up for 2 seconds.

• Activation of a beep for 1 second.

Note:

• If food is placed in the refrigerator before the appliance has cooled completely, it may deteriorate.

CONTROL PANEL DESCRIPTION

(1) Cavity selection "Fridge / Freezer" pushbutton (2) Green LED ON/OFF informing of:

- freezer cabinet temp. setting (green LED light ON)

- fridge cabinet temp. setting - (green LED light OFF)

(3) Temperature selection button "Temp.°C". (4) (5) (6) Green LEDs indicating temperature settings. (7) "Reset alarm" pushbutton. (8) Internal light switch

Temperature Adjustment between cabinets is made with the "Fridge / Freezer" button (1). When the LED (2) is OFF the user can select temperature in the fridge.

The temperature in the refrigerator compartment

may be set by the temperature setting pushbutton (3) on the control panel.

On the left there are described the 5 set points for the fridge compartment. At each short pressure of the "Fridge / Freezer" button (1), the setpoint will change (cyclically). The medium temp. is the recommended temperature settings.

high temp.

med-high temp.

medium temp.

med-low temp.

low temp.

Description:

LED OFF

LED ON

CAROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

PRODUCT SHEET

CAROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

To adjust the temperature in the freezer compartment, use the "Fridge / Freezer" button (1) to control the

temperature in the freezer cabinet. The

green LED (2) turns ON. The temperature in the freezer compartment may be set by the temperature setting pushbutton (3) on the control panel.

On the left are described the 5 set points for the freezer compartment and fast freezing. At each short pressure of the "Fridge / Freezer" button (1), the setpoint will change (cyclically). The medium temp. is the

recommended temperature settings. After setting the "Fast Freezing" (automatically disabled after 24 hours) the freezer temperature is set to previous displayed setpoints. When the product is disconnected from the power supply and then reconnected, the control unit remembers previously set temperatures for freezer and refrigerator.

FAN WITH A BUTTON

The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food. By default, the fan is ACTIVE. It is advisable to keep the fan active, so that the "Fresh Control" / "ProFresh" function can work and also when the ambient air temperature is over 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions.

Note Do not obstruct the air intake area with food items. When "Fresh Control" / "ProFresh" is disabled remember to turn off the fan when there is a lower ambient air temperature.

To turn off the fan press the button (1a). If the appliance has the fan it can be equipped with the antibacterial filter. Remove it from the box (found in the crisper drawer (item 7) and insert into the cover of fan (item 1b). The replacement procedure is attached with the filter.

“ZERO DEGREES” BOX (depending on the model)

The "Zero Degrees" box is specifically designed to maintain a low temperature and a suitable humidity level, in order to keep foods fresher for longer (e.g. meat, fish, fruit and winter vegetables).

Activating and deactivating the box

The temperature inside the box, when active, is approximately 0°.

The following factors are vital for the "Zero Degrees" box to work properly:

- the refrigerator compartment must be switched on

- the temperature of the refrigerator compartment must

be between +2°C and +5°C

- the box must be inserted to enable activation

- no special functions must have been selected (Standby, Cooling-Off, Vacation – where applicable).

If one of these special functions has been selected, the "Zero Degrees" box must be deactivated manually, and any fresh food inside it removed. If manual deactivation does not take place, the box will be deactivated automatically after 8 hours.

Note:

- if the symbol does not light up when the box is activated, check that the box is properly inserted; if the problem persists, contact your nearest authorized After-sales Service

- if the box is active and the drawer open, the symbol on the control panel may be deactivated automatically. If the drawer is inserted, the symbol will become active again

- irrespective of the state of the box, a slight noise may be heard: this is normal and is not a cause for concern.

- when the box is not active, the temperature inside it depends on the general temperature inside the refrigerator compartment. In this case, we recommend it is used to store fruit and vegetables which are not sensitive to cold temperatures (fruits of the forest, apples, apricots, carrots, spinach, lettuce, etc.).

Important: when the function is activated and there are foodstuffs with a high water content, condensation may form on shelves. In this case, disable the function temporarily.

Removing the "Zero Degrees" box:

The "Zero Degrees" box can be removed to create more space inside the refrigerator. In this case proceed as follows:

- switch off the box

- pull out the drawer and the white plastic shelf underneath the box.

Note: the upper shelf and the side supports cannot be removed. To restore "Zero Degrees" box operation, make sure you replace the white plastic shelf underneath the box before inserting the drawer and reactivating the function. To optimise energy consumption, we recommend you deactivate the "Zero Degrees" box and remove it. Clean the box and all its parts regularly, using a cloth and a solution of warm water and neutral detergent

PRODUCT SHEET

To activate/deactivate the box, press the button as illustrated in the figure.

When the box has been activated, the symbol lights up.