ENGLISH Instruction for use Page 4
3
USING FOR THE FIRST TIME
Plug in the appliance.
A beep may be emitted by some models, to indicate that the temperature alarm has intervened:
press the button to switch off acoustic alarms.
Note: After turning the appliance on, you must wait for 4-5 hours for the correct storage
temperature to be reached for a normally filled appliance.
MAINTENANCE AND CLEANING
OF THE APPLICANCE
Periodically clean the appliance with a cloth and a solution of lukewarm water and neutral
detergent specifically for refrigerator interiors. Never use abrasive detergents.
Before any cleaning or maintenance operation, unplug the appliance from the mains or disconnect
the electrical power supply.
LED REPLACEMENT
Always disconnect the appliance from the power supply before replacing the light bulb. Then
follow the instructions based on the type of light bulb for your product.
Replace the light bulb with one with the same features, available from the Technical Assistance
Service and authorised sellers.
The light system inside the refrigerator compartment uses LEDs light, allowing
a better lightning than traditional light bulbs as well as a very low energy
consumption.
Contact the Technical Assistance Service if you need a replacement.
Important: The refrigerator compartment light switches on when the refrigerator
door is opened.
(depending on the model)
4