BATRON BTHQ 100032V-04 User Manual

Specification for
BTHQ 100032V-STF-LEDY.G. W.C.

BA TRON

Version June 2003

DATA MODUL AG Landsberger Str. 322 80687 München Tel.: [phone] Fax [phone]

0

www.data-modul.de

VL-FS-BTHQ 100032V-04 REV. B
(BTHQ 100032V-STF-LEDY.G. W.C.)

JUNE/2003

PAGE 2 OF 10

DOCUMENT REVISION HISTORY 1:

DOCUMENT

REVISION

DATE DESCRIPTION CHANGED

BY

CHECKED

BY

FROM TO

A

2002.12.30

First Release.

PHILIP

Z.B.HE

CHENG

A B

2003.06.25

(Based on Test Specification
VL-TS-BTHQ 100032V-XX REV. E
2003-05-25).

Item 1 to 5 were updated:

1) Requested by customer, Item
description was changed to
“BTHQ 100032V-STF-LEDY.G.
W.C.”.

2) (P.8,table 5)Supply voltage
VLCD was changed to 6.0±0.3.

3) (P.8,table 5)VLCD at extreme
temperature were added in.

4) (P.8,table 5)Current I0 & IDD
were updated.

5) (P.8,table 5)Supply voltage of
backlight were updated.

SUNNY LEE

HE ZUO
BING

DATA MODUL AG Landsberger Str. 322 80687 München Tel.: [phone] Fax [phone]

www.data-modul.de

VL-FS-BTHQ 100032V-04 REV. B

(BTHQ 100032V-STF-LEDY.G. W.C.)

JUNE/2003

PAGE 3 OF 10

CONTENTS

Page No.

1. GENERAL DESCRIPTION 4

2. MECHANICAL SPECIFICATIONS 4

3. INTERFACE SIGNALS 6

4. ABSOLUTE MAXIMUM RATINGS 7

4.1

ELECTRICAL MAXIMUM RATINGS (Ta=25°C)

4.2 ENVIRONMENTAL CONDITION 7

5. ELECTRICAL SPECIFICATIONS 8

5.1 TYPICAL ELECTRICAL CHARACTERISTICS 8

5.2 TIMING SPECIFICATIONS 9

5.3 TIMING DIAGRAM OF VDD AGAINST V0 10

7

DATA MODUL AG Landsberger Str. 322 80687 München Tel.: [phone] Fax [phone]

www.data-modul.de

VL-FS-BTHQ 100032V-04 REV. B

(BTHQ 100032V-STF-LEDY.G. W.C.)

JUNE/2003

PAGE 4 OF 10

Specification

of

LCD Module Type

Model No.: BTHQ 100032V-04

1. General Description

• 100 x 32 dots STN Positive Yellow-green Transflective Dot Matrix LCD Module.

• Viewing Angle: 6 O’clock direction.

• Driving scheme: 1/32 duty, 1/6.7 bias.

• ‘Epson’ SED1520 D0A (Die Form) dot matrix LCD drivers or equivalent.

• Yellow-green LED01 backlight.

• Connector: SMT connector 18 pins, 1 row, 1.00 mm pitch.

2. Mechanical Specifications

The mechanical detail is shown in Fig. 1 and summarized in Table 1 below.

Table 1

Parameter Specifications Unit
Outline dimensions 65.0(W) x 28.4(H) x 8.0 MAX.(D) (Excluded connector) mm
Effective viewing area 46.0(W) x 18.4(H) mm
Active area 42.99(W) x 15.31(H) mm
Display format 100 x 32 dots
Dot size 0.415(W) x 0.464(H) mm
Dot spacing 0.015(W) x 0.015(H) mm
Dot pitch 0.430(W) x 0.479(H) mm
Weight: Approx. 20 Grams

DATA MODUL AG Landsberger Str. 322 80687 München Tel.: [phone] Fax [phone]

www.data-modul.de

VL-FS-BTHQ 100032V-04 REV. B

(BTHQ 100032V-STF-LEDY.G. W.C.)

JUNE/2003

PAGE 5 OF 10

Figure 1: Specification Drawing

DATA MODUL AG Landsberger Str. 322 80687 München Tel.: [phone] Fax [phone]

www.data-modul.de

VL-FS-BTHQ 100032V-04 REV. B

(BTHQ 100032V-STF-LEDY.G. W.C.)

JUNE/2003

PAGE 6 OF 10

3. Interface signals

Table 2

Pin No. Symbol Description

1 VSS Ground (0V)
2 VDD Power supply for logic (+5V)
3 V0 Power supply for LCD driver
4 A0 Data/Command Select Input

‘High’: Display data on DB0-DB7.
‘Low’: Display control data on DB0-DB7.

5 R/W Chip interface with 68 family MPU:

Read/Write control signal input pin.
R/W = “High”: Read control signals.
R/W = “Low”: Write control signals.

6 E1 For first LCD driver SED1520:

Chip interfaced with 68 family MPU: Input. Active high.
Enable clock signal input for the 68 family MPU.

7 E2 For second LCD driver SED1520:

Chip interfaced with 68 family MPU: Input. Active high.

Enable clock signal input for the 68 family MPU.
8 NC No connection.
9 DB0 Data input/output (LSB)

10 DB1 Data input/output
11 DB2 Data input/output
12 DB3 Data input/output
13 DB4 Data input/output
14 DB5 Data input/output
15 DB6 Data input/output
16 DB7 Data input/output (MSB)
17 LED+ Anode of LED backlight.
18 LED- Cathode of LED backlight.

DATA MODUL AG Landsberger Str. 322 80687 München Tel.: [phone] Fax [phone]

www.data-modul.de

A
H

V

H

VL-FS-BTHQ 100032V-04 REV. B

(BTHQ 100032V-STF-LEDY.G. W.C.)

JUNE/2003

PAGE 7 OF 10

4. Absolute Maximum Ratings

4.1 Electrical Maximum Ratings (Ta = 25 ºC)

Table 3

Parameter Symbol Min. Max. Unit
Power Supply voltage (Logic) VDD - VSS -0.3 +8.0 V
Power Supply voltage
(LCD drive)

VLCD

=VDD – V0

-0.3 +16.5 V

Input voltage Vin -0.3 VDD +0.3 V

Note:

The modules may be destroyed if they are used beyond the absolute maximum ratings.

All voltage values are referenced to VSS = 0V.

4.2 Environmental Condition

Table 4

Item

Operating

Temperature

(Topr)

Storage

Temperature

(Tstg)

Remark

Min. Max. Min. Max.
mbient Temperature
umidity

0°C +50°C

95% max. RH for Ta ≤ 40°C

-10oC

+60°C

Dry
no condensation

< 95% RH for Ta > 40°C

ibration (IEC 68-2-6)
cells must be mounted
on a suitable connector

Shock (IEC 68-2-27)

alf-sine pulse shape

Frequency: 10 ∼ 55 Hz
Amplitude: 0.75 mm
Duration: 20 cycles in each direction.
Pulse duration : 11 ms

Peak acceleration: 981 m/s2= 100g

3 directions

3 directions

Number of shocks : 3 shocks in 3
mutually perpendicular axes.

DATA MODUL AG Landsberger Str. 322 80687 München Tel.: [phone] Fax [phone]

www.data-modul.de

VL-FS-BTHQ 100032V-04 REV. B

(BTHQ 100032V-STF-LEDY.G. W.C.)

JUNE/2003

PAGE 8 OF 10

5. Electrical Specifications

5.1 Typical Electrical Characteristics

At Ta = 25 °C, VDD = 5V±5%, VSS=0V.

Table 5

Parameter Symbol Conditions Min. Typ. Max. Unit
Supply voltage (Logic) VDD -VSS 4.75 5.0 5.25 V
Supply voltage (LCD) VLCD

=VDD –V0

Ta=-20°C,
Character mode,

- 6.31 - V

VDD = 5V, Note 1.
Ta=+25°C,

5.7 6.0 6. 3 V
Character mode,
VDD = 5V, Note 1.
Ta=+70°C,

- 5.69 - V
Character mode,
VDD = 5V, Note 1.

VIH “H” level 2.0 - VDD V Input signal voltage

for E,DB0-DB7,R/W,A0

(Logic & LCD)

VIL “L” level 0 - 0.8 V
IDD

Character mode, Note 1 - 1.0 1.5 mA Supply current
Checkerboard mode,

- 1.0 1.5 mA
Note 1
Character mode, Note 1 - 1.0 1.5 mA Supply current (LCD) I0
Checkerboard mode,

- 1.0 1.5 mA
Note 1

Forward voltage of Pure
Green LED01 backlight

VLED01 Forward current

=40mA

4.0 4.1 4.2 V

Number of dies
=2x4=8 dies

Note (1) : There is tolerance in optimum LCD driving voltage during production and it will be

within the specified range.

DATA MODUL AG Landsberger Str. 322 80687 München Tel.: [phone] Fax [phone]

www.data-modul.de

VL-FS-BTHQ 100032V-04 REV. B

(BTHQ 100032V-STF-LEDY.G. W.C.)

JUNE/2003

PAGE 9 OF 10

5.2 Timing Specifications

At Ta = 0 °C to +50 °C, VDD = 5V±5% , VSS = 0V.

Refer to Fig. 2, MPU bus read / write II timing diagram (68 family MPU)

Table 6

Parameter Signal Symbol Condition Min. Max. Unit
System Cycle Time A0,/CS,R/W t
Address Set-up Time A0,/CS,R/W t
Address Hold Time A0,/CS,R/W t
Data Set-up Time DB0-DB7 t
Data Hold Time DB0-DB7 t
Output Disable Time DB0-DB7 t
Access Time DB0-DB7 t
Enable Pulse

E tEW - 100 - ns

- 1000 - ns

CYC6

- 20 - ns

AW6

- 10 - ns

AH6

- 80 - ns

DS6

- 10 - ns

DH6

CL=100pF 10 60 ns

OH6

CL=100pF - 90 ns

ACC6

Width(Read)
Enable Pulse

E tEW - 80 - ns
Width(Write)
Rise & Fall Time - tr, tf - - 15 ns

E1 or E2
(E)

A0, CS

Figure 2: MPU bus read / write II timing diagram (68 family MPU)

DATA MODUL AG Landsberger Str. 322 80687 München Tel.: [phone] Fax [phone]

www.data-modul.de

VL-FS-BTHQ 100032V-04 REV. B

(BTHQ 100032V-STF-LEDY.G. W.C.)

JUNE/2003

PAGE 10 OF 10

5.3 Timing Diagram of VDD against V0.

Power on sequence shall meet the requirement of Figure 3, the timing diagram of VDD against V0.

VDD

95%

LOGIC SUPPLY

VOLTAGE

0V

OV

LCD SUPPLY

VOLTAGE

50ms(typical)

V0

Figure 3: Timing diagram of VDD against V0.

DATA MODUL AG Landsberger Str. 322 80687 München Tel.: [phone] Fax [phone]

www.data-modul.de