• Driving IC : ‘HITACHI’ HCD66717A03BP (Gold Bump) or equivalent
LCD Controller/Driver.
• Serial interfacing: I2C-bus or clock-synchronized serial interface.
• Built-in Booster circuit.
• Temperature compensation.
• Yellow-green LED04 backlight.
5/15
for
2. Mechanical Specifications
The mechanical detail is shown in Figure 1 and summarized in Table 1 below.
Table 1
Parameter Specifications Unit
Outline dimensions 80.0(W) x 36.0(H) x 13.0 MAX.(D) mm
Viewing area 61.0(W) x 15.8(H) mm
Display format 2 lines x 16 characters (5 x 8 dots) Character size 2.95(W) x 5.55(H) mm
Character spacing 0.60(W) x 0.40(H) mm
Character pitch 3.55(W) x 5.95(H) mm
Dot size 0.55(W) x 0.65(H) mm
Dot spacing 0.05(W) x 0.05(H) mm
Dot pitch 0.60(W) x 0.70(H) mm
Weight Approx. 36.6 grams
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
BA TRON
BT 21605AVB-YETF-LED04-I2C(HD66717)
6/15
Figure 1: Outline drawing.
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
BA TRON
BT 21605AVB-YETF-LED04-I2C(HD66717)
V0
RESET
CS
GND
7/15
4
VDD
SCL
SDA
LCD CONTROLLER /
DRIVER
'HITACHI'
HCD66717A03BP
(GOLD BUMP)
4
BT 21605AVB LCD DISPLAY
4
2 LINES X 16 CHARACTERS (5 X 8 DOTS)
4
4
60
60
4
20
LED+
YELLOW-GREEN LED04 BACKLIGHT
LED-
Figure 2: Block Diagram
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
BA TRON
BT 21605AVB-YETF-LED04-I2C(HD66717)
3. Absolute Maximum Ratings
3.1 Electrical Maximum Ratings (Ta = +25 °°°°C)
Table 2
Parameter Symbol Min. Max. Unit Remark
Supply voltage range (Logic) VDD - GND -0.3 +7.0 V 1
Supply voltage VDD-V0 -0.3 +15.0 V 1,2
Input voltage range Vi -0.3 VDD +0.3 V 1
Note
1) The modules may be destroyed if they are used beyond the absolute maximum ratings.
All voltage values are referenced to GND = 0V.
2.) VDDЊV1ЊV2ЊV3ЊV4ЊV5ЊV0 must be maintained.
8/15
ʳʳʳʳ
ʳʳʳʳ
3.2 Environmental Conditions
Table 3
Operating
Item
Ambient Temperature
Humidity Note 1 Note 1 no condensation
Vibration (IEC 68-2-6)
cells must be mounted
on a suitable connector
Shock (IEC 68-2-27)
Half-sine pulse shape
Note 1: 95% max. RH for Ta ≤ 40°C< 95% RH for Ta > 40°C
Temperature
Min. Max. Min. Max.
-20°C +70°C -30°C +80°C
(Topr)
Note 2 Note 2 3 directions
Note 3 Note 3 3 directions
Storage
Temperature
(Tstg)
Remark
Dry
Note 2: Frequency: 10 ∼ 55 Hz
Amplitude: 0.75 mm
Duration: 20 cycles in each direction.
Number of shocks: 3 shocks in 3 mutually perpendicular axes.
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
BA TRON
BT 21605AVB-YETF-LED04-I2C(HD66717)
4. Electrical Specifications
4.1 Interface signals
Table 4: Pin assignment of 9 pin connection
Pin No. Symbol Description
1 V0 Negative power supply for LCD driving voltage.
2 RESET Reset pin. Initializes the LSI when low.
3 CS Selects the HD66717 during clock-synchronized serial mode:
Low: HD66717 is selected and can be accessed.
High: HD66717 is not selected and cannot be accessed.
Must be grounded (CS=”L”) for I2C bus mode.
4 GND Ground (0V)
5 VDD Power supply for logic.
6 SCL Inputs serial clock pulses during I2C bus mode and clock-synchronized
serial mode.
7 SDL Inputs serial (receive) data and outputs the acknowledge bit during I2C
bus mode;
Inputs serial (receive) data during clock-synchronized serial mode.
8 LED+ Anode of LED backlight
9 LED- Cathode of LED backlight
9/15
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
BA TRON
10/15
BT 21605AVB-YETF-LED04-I2C(HD66717)
4.2 Typical Electrical Characteristics
At Ta = +25 °°°°C, VDD = +3.0V±±±±5%, GND=0V.
Table 5(A)
Parameter Symbol Condition Min. Typ. Max. Unit
Operating voltage (Logic) VDD-GND 2.85 3.0 3.15 V
Operating voltage for
LCD
Operating supply current
(Logic & LCD)
Operating current for
negative LCD power
supply
VLCD
=VDD-V5
VDD=3V,
Note 1 & 2
IDD VDD=3V,
Checker board mode
I0 VDD=3V,
Checker board mode,
Note 1
IL
VDD=2.85V to 3.0V -0.3 - 0.5VDD V Input signal voltage low V
6.9 7.2 7.5 V
- 0.3 0.45 mA
- 0.06 0.1 mA
VDD=3.0V to 3.15V -0.3 - 0.6
Input signal voltage high VIH 0.7VDD - VDD V
Supply voltage of
yellow-green LED04
backlight
VLED Supply current
=90mA.
Number of
3.8 4.1 4.5 V
LED chips=18.
At Ta = +25 °°°°C, VDD = +5.0V±±±±5%, GND=0V.
Table 5(B)
Parameter Symbol Condition Min. Typ. Max. Unit
Operating voltage (Logic) VDD-GND 4.75 5.0 5.25 V
Operating voltage for
LCD
Operating supply current
(Logic & LCD)
Operating current for
negative LCD power
supply
VLCD
=VDD-V5
VDD=5V,
Note 1 & 2
IDD VDD=5V,
Checker board mode
I0 VDD=5V,
Checker board mode,
Note 1
6.9 7.2 7.5 V
- 0.6 0.9 mA
- 0.06 0.1 mA
Input signal voltage low VIL -0.3 - 0.6 V
Input signal voltage high VIH 0.7VDD - VDD V
Supply voltage of
yellow-green LED04
backlight
VLED Supply current
=90mA.
Number of
3.8 4.1 4.5 V
LED chips=18.
Note 1:
There is tolerance in optimum LCD driving voltage during production and it will be within
the specified range.
Note 2:
V5 is represented by the test point V0 in the silk screen in PCB.
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
BA TRON
11/15
BT 21605AVB-YETF-LED04-I2C(HD66717)
4.3 Timing Specifications
I2C Bus Interface Operation
At Ta = -20 °C to +70 °C, VDD = +3.0V±5%, GND=0V.
Refer to Fig.2, I2C Bus interface timing diagram.
Table 6
At Ta = -20 °C to +70 °C, VDD = +5.0V±5%, GND=0V.
Refer to Fig.2, I2C Bus interface timing diagram.
Table 7
Figure 2 : I2C Bus Interface Timing.
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
BA TRON
12/15
BT 21605AVB-YETF-LED04-I2C(HD66717)
Clock-Synchronized Serial Interface Operation
At Ta = -20 °C to +70 °C, VDD = +3.0V±5% or VDD = +5.0V±5%, GND=0V.
Refer to Fig.3, Clock-Synchronized Serial Interface Timing.
Table 8
Figure 3: Clock-Synchronized Serial Interface Timing
Reset Timing
At Ta = -20 °C to +70 °C, VDD=+3.0V±5% or VDD=+5.0V±5%, GND=0V.
Refer to Fig.4, Reset timing diagram.
Table 9
Parameters Symbol Min. Typ. Max. Unit
Reset low-level width t
10 - - ms
RES
RESET
Figure 4 : Reset Timing Diagram
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119
www.data-modul.de
BA TRON
13/15
BT 21605AVB-YETF-LED04-I2C(HD66717)
4.4 Relation between Character Codes and Character Patterns (ROM code: A03)
DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 Fax 089/ 56017-119