Baseboarders B2331646, B2331645, B2331643, B2331647, B2331640 User Manual
...
Basic
Will it Work for My Project?
#1 Remove one endcap and the front panel of
your existing baseboard heater.
#2 Measure between the floor and the top of the
heater.
• Objective: 7.5” or greater
• If less than 7.5” use the Baseboarders Wall Brackets (WB001) for
mounting.
#3 Measure from the bottom of the heating
element to the top of the heater.
• Objective: Between 5” and 6.75”
• If less than 5” use the Baseboarders Wall Brackets (WB001) for
mounting.
• If the distance is greater than 6.75”, the Baseboarders Premium
TALL (BB003) panel should be used.
#4 Measure from the outside face of the fi nned
tube heating element to the back plate.
• Objective: Less than 3.25”
• If larger 4” x 4” or 4” x 6” commercial style element is in place, a
wood molding will solve the depth issue.
If your measurements fi t within all these
objectives then Baseboarders Basic, Premium
Elliptus
Premium
or Elliptus can be used for your application.
Basic
Premium
Will it Work for My Project?
#1 Remove one endcap and the front panel of
your existing baseboard heater.
#2 Measure between the floor and the top of the
heater.
• Objective: 7.5” or greater
• If less than 7.5” use the Baseboarders Wall Brackets (WB001) for
mounting.
#3 Measure from the bottom of the heating
element to the top of the heater.
• Objective: Between 5” and 6.75”
• If less than 5” use the Baseboarders Wall Brackets (WB001) for
mounting.
• If the distance is greater than 6.75”, the Baseboarders Premium
TALL (BB003) panel should be used.
#4 Measure from the outside face of the fi nned
tube heating element to the back plate.
• Objective: Less than 3.25”
• If larger 4” x 4” or 4” x 6” commercial style element is in place, a
wood molding will solve the depth issue.
If your measurements fi t within all these
objectives then Baseboarders Basic, Premium
Elliptus
Premium
or Elliptus can be used for your application.
Basic
Premium TALL
Will it Work for My Project?
#1 Remove one endcap and the front panel of
your existing baseboard heater.
#2 Measure from the bottom of the heating
element to the top of the heater.
• Objective: Distance greater than 6.75”
#3 Measure from the outside face of the fi nned
tube heating element to the back plate.
• Objective: Less than 3.25”
• If larger 4” x 4” or 4” x 6” commercial style element is in place, a
wood molding will solve the depth issue.
If your measurements fi t within all these
objectives then Baseboarders Premium TALL
should be used for your application.
Premium TALL
Elliptus
Will it Work for My Project?
#1 Remove one endcap and the front panel of
your existing baseboard heater.
#2 Measure between the floor and the top of the
heater.
• Objective: 7.5” or greater
• If less than 7.5” use the Baseboarders Wall Brackets (WB001) for
mounting.
#3 Measure from the bottom of the heating
element to the top of the heater.
• Objective: Between 5” and 6.75”
• If less than 5” use the Baseboarders Wall Brackets (WB001) for
mounting.
• If the distance is greater than 6.75”, the Baseboarders Premium
TALL (BB003) panel should be used.
#4 Measure from the outside face of the fi nned
tube heating element to the back plate.
• Objective: Less than 3.25”
• If larger 4” x 4” or 4” x 6” commercial style element is in place, a
wood molding will solve the depth issue.
If your measurements fi t within all these
objectives then Baseboarders Basic, Premium
Elliptus
Premium
or Elliptus can be used for your application.
Basic
Basic
Panel Measurements
Premium
Panel Measurements
Loading...