Original
-
Gebrauchs
anleitung
W2000 E
825215
V3/0818
GB/UK
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 20
1.1 Key to symbols ..................................................................................................... 20
1.2 Safety instructions ................................................................................................ 21
1.3 Proper use ............................................................................................................ 25
2. General information ................................................................................................ 26
2.1 Liability and Warrantees ....................................................................................... 26
2.2 Copyright protection ............................................................................................. 26
2.3 Declaration of conformity ...................................................................................... 26
3. Transport, packaging and storage......................................................................... 27
3.1 Delivery check ...................................................................................................... 27
3.2 Packaging ............................................................................................................. 27
3.3 Storage ................................................................................................................. 27
4. Technical data ......................................................................................................... 28
4.1 Technical specification ......................................................................................... 28
4.2 Overview of parts ................................................................................................. 29
5. Installation and operation ....................................................................................... 30
5.1 Installation ............................................................................................................ 30
5.2 Operation .............................................................................................................. 33
6. Cleaning ................................................................................................................... 35
7. Waste disposal ........................................................................................................ 36
Bartscher GmbH phone: +49 5258 971-0
Franz-Kleine-Str. 28 fax: +49 5258 971-120
33154 Salzkotten Service-Hotline: +49 5258 971-197
Germany www.bartscher.com
- 19 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions
in this instruction manual.
1.1 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
DANGER!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.
- 20 -
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.2 Safety instructions
•
The device is not intended for use by individuals (including
children) with physical or mental disabilities, insufficient
experience, and/or insufficient knowledge unless such persons
are under the care of a person responsible for their safety or
have received instructions regarding appropriate use of the
device.
•
Children should be observed to ensure that they are not playing
with or starting the device.
•
This device is not equipped with a thermostat regulating the room
temperature. Do not use the device in small rooms if there are
people there who are not able to leave the room on their own,
unless during the operation of the device a permanent
supervision is ensured.
•
Never leave the device unattended when in use.
•
Never use the device with a programmable switch, timer or an
automatic switching device.
- 21 -
The device must be operated in correct and safe technical
•
condition only. In case of operational problems disconnect the
device from the power supply (pull the plug from the socket) and
contact the service company.
•
Prevent access of children to the package materials like plastic
bags and foamed polystyrene elements. Suffocation hazard!
•
Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the
device. Do not attempt to repair the device yourself.
•
Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous
for the user or lead to damages of the device or personal injury,
and further, the warranty expires.
•
To prevent hazards and to ensure optimum efficiency, no
modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.
DANGER! Electric shock hazard!
To avoid the hazard results please follow the safety instructions
below.
•
Never allow the power cable to come into contact with heat
sources or sharp edges. The power cable should not hang over
the side of the working surface. Ensure that no one can step on
or trip over the cable.
•
The power cable must not be folded, bent or tangled, and must
always remain fully unrolled. Never place the device or other
objects on the power cable.
- 22 -
Do not cover the cable. Keep away the cable from operating
•
range.
•
Check the power cord regularly for damage. Do not use the
appliance if the power cord is damaged. If this cable is damaged,
it must be replaced by customer service or a qualified electrician
in order to avoid dangers.
•
The supply cable must be disconnected from the socket
only by pulling the plug.
•
Never carry or lift the device by the supply cable.
•
Never wrap the power cord around the heater.
•
In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
•
Do not place foreign objects in the device openings! This may
result in electric shock and damage the equipment!
•
The device may not be exposed to vibrations and other
mechanical shocks.
•
Although the heater is splash-proof, do not use the device
during rain.
•
Never immerse the device, power cord or the plug in water or
other fluids.
•
Do not use any acid agents and make sure no water ingresses
the device.
•
Never operate the device with moist hands or standing on wet
floor.
•
Remove the plug from its socket:
-
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
- 23 -
HOT SURFACE! Burn hazard!
To avoid the hazard results please follow the safety instructions
below.
•
During the operation, the housing and protective grid become
very hot, do not touch these elements during the operation of
the device.
•
Also after switching the device off, it remains hot for some
time afterwards; before cleaning the device, handling or
moving it to a different place, leave the device to cool down.
•
Never move the device during its operation.
•
Keep children and animals away from the device. Children
should never use the heater.
WARNING! Fire or explosion hazard!
To avoid the hazard results please follow the safety instructions
below.
•
Do not use the device near the containers holding gas, petrol,
paint, spirits, alcohol or inflammable objects. High temperature
may lead to their evaporation and their coming into contact with
the sources of ignition may result in deflagration, in effect
leading to personal injuries and material damages.
•
The heater is designed for private use only. Never use the device
in greenhouses, livestock buildings or similar buildings, because
they often have inflammable objects or excessive dust which
may also present a risk.
•
Never dry clothes, towels or similar objects on the device. Risk
of overheating and fire!
- 24 -
In case of fire, before starting any fire-fighting actions, pull the
•
plug from the socket. Ensure proper flow of fresh air.
Note: Never extinguish fire with water while the plug is
connected to the socket. Risk of electric shock!
1.3 Proper use
The operational safety of the device is assured only in case of proper use, according
to the operation manual.
All technical activities like installation and maintenance must be performed by the
qualified service personnel only.
Heater is designed for inner and outer spaces, and may be used outdoors and
in an enclosed space, provided that the safety instructions presented in this
operating manual are observed.
The heater is designed only for home use. Never use it in greenhouses, livestock
buildings and similar buildings.
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.
The operator is liable for all damages resulting from inappropriate use.
- 25 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
- violation of advice concerning operation and cleaning;
- use other than designed;
- alterations made by user;
- use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
- 26 -
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
If you liked to dispose the packing, consider the regulations applicable
in your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
- Do not store outdoors.
- Keep it dry and dust-free.
- Do not expose it to aggressive media.
- Do not expose it to direct sunlight.
- Avoid mechanical shocks and vibration.
- In case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly.
If required refresh or renew.
- 27 -
4. Technical data
4.1 Technical specification
Name
Code-No:
Housing material: Aluminum
Design:
Power: 2 kW / 230 V 50 Hz
Type of protection: IP54
Dimensions: W 615 x D 60 x H 100 mm
Weight: 1.6 kg
Accessories: 1 remote control, mounting materials
Heater W2000 E
for wall mounting
825215
infrared heating tube 2000 W
for indoor and outdoor use
wall holder for easy mounting,
inclination angle up to 90°
main switch, ON/OFF button
cable outlet at the rear of the heater
cable length: 1.7 meters
We reserve the right to make technical changes!
Accessories within the scope of delivery
- 28 -
Item Name Quantity
①
M6*50 anchors 4
②
M6*10 bolts 3
③
M6 nuts 3
Wall holder
④
enabling tilting
⑤
Locking screw 1
⑥
Remote control 1
⑦
M6 open end wrench 1
⑧
Allen wrench 1
1
4
7
4.2 Overview of parts
1
3
2
6
6
Protective fins
1
Wall holder
2
Housing
3
Main switch
4
Control panel
5
Ventilation holes
6
Infrared heating tube
7
5
- 29 -
Wall
Floor
Roof
5. Installation and operation
5.1 Installation
• Unpack the device and remove the packaging material. Check the delivery for
completeness.
CAUTION!
Never remove the nameplate and warning signs from the device.
Place of installation
• The heater may be mounted outdoors or in a big, open and well ventilated room.
Make sure that in the place of installation the high temperature does not directly
affect various obstacles or objects (e.g. branches, furniture, curtains or other
inflammable objects).
• Never hang the device near inflammable materials.
• Do not place inflammable liquids, gases or other inflammable objects near the
device. Risk of fire!
• Never mount the device within bathing areas, saunas or bathrooms and shower
areas.
• Never use the heater in dusty or explosive environment.
• Never place the device directly above or under the wall socket.
• The device may be mounted only on or under the non-combustible material (wood
and similar material is forbidden).
• Mount the heater on the wall with a big free
space. Keep the following minimum distances:
a) 50 cm on the side to the wall or other
objects;
b) 50 cm from the ceiling;
c) 180 cm mounting height from the floor.
• The heater must be mounted at a safe distance
(free space) of at least 2.0 m, from inflammable
materials and glass walls.
- 30 -
Step 1:
right
wrong
M6 nuts
• If the device is mounted in workshops or garages in which flammable or combustible
lacquers are used, keep a safe distance of at least 4 meters from the source of
hazard.
• If the device is installed in the areas in which spray-painting of any type is
performed, it cannot be switched on during lacquering.
• Mount the device so that the plug is easily accessible so as to quickly disconnect
the device from the power supply if the need arises.
Installation
• The device is designed for wall mounting. Use the supplied mounting accessories.
Perform the following actions:
Using 3 M6*10 bolts and 3 nuts mount the heater on the wall holder.
M6*10 bolts
Wall holder
Step 2:
WARNING!
During the installation of the wall
holder, make sure to mount the
device as shown on the illustration
on the right, to avoid fire hazard as a
result of electronics overheating.
Using the holes in the wall holder mark 4 drilling places at the height of at least 180 cm.
Drill 4 holes and insert 4 supplied M6*50 anchors.
Unscrew the nuts by means of the open end wrench, then remove spring washers and
ordinary washers from threaded bolts of the anchors. The removed elements will be
used during further mounting.
- 31 -
Wall
Mount the wall holder of the heater on the threaded bolts of the anchors. Place the
washers on the threaded bolts and tighten the wall holder with the nuts.
Anchor
Wall holder
CAUTION!
The device may be used only in the horizontal position!
Change of the inclination
WARNING! Burn hazard!
During the operation, the heater becomes very hot!
Never change its inclination angle the heater during use!
Disconnect the device from the power supply before
introducing changes and leave it to cool down.
• The inclination angle may be changed within the
range from 0° to 90°.
• For this purpose, loosen both M6* bolts near the
wall holder (the figure on the right) by means of
the Allen wrench.
• Set the desired inclination angle. Next, retighten
the loosened bolts with the Allen wrench.
CAUTION!
The inclination angle may be changed only in the way presented!
- 32 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate).
Connect the device only in case of compliance!
• Never connect the device to the power supply before its proper mounting
on the wall.
• The device must be grounded.
• The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
5.2 Operation
• Before the first use, clean the device according to the instructions presented in
section 6 “Cleaning”.
Control panel
9
8
10
11
ON/OFF switch
8
Operation mode indicator (red)
9
Infrared receiver for the remote control
10
Stand-by mode indicator (red)
11
- 33 -
1 press once
→
the heating tube is switched
on
Press again
→
the heating tube is switched off,
Switching the device on
• Connect the device to a single, grounded socket.
• Switch the device on using the main switch on the right side of the device, setting it
to “ON” position. The stand-by mode indicator on the control panel will come on.
• To switch on individual heating tubes, press ON/OFF switch on the control panel
or use the supplied remote control.
Remote control
The infrared heating tubes may be switched on or off with the remote control
button, as needed.
the device in standby mode
• Heating tubes emitting infrared radiation will immediately start dissipating the heat.
HOT SURFACE! Burn hazard!
During the operation, the heater becomes very hot.
Never touch the device during the operation and
immediately after its shutdown.
• After the use, switch the heater off with the main switch located at the right side,
switching it to “OFF” position and disconnect it from the power (pull the plug from the
socket!).
- 34 -
6. Cleaning
WARNING!
Before cleaning, switch the device off with the main
switch, disconnect the device from the power supply
(pull the plug!) and leave the device to cool down.
Never clean the device with use of pressurized water jet.
Protect the device from the water penetration.
CAUTION!
Never use aggressive or abrasive cleaning agents.
Do not use flammable cleaning agents (e.g. gasoline or solvents)!
Do not use sharp or pointed objects.
o Clean the device regularly.
o Wipe the housing of the device with a soft, moist cloth and then dry the cleaned
surfaces thoroughly.
o Clean the protective fins with a soft brush or vacuum cleaner.
o Use only soft cloth for cleaning of the device.
o Any maintenance and repair work, including heating tube replacement, may be
performed only by an electrician.
Storage of the device
o If the device is not used for a long time, it should be disassembled.
o Clean the device according to the above mentioned description and store in a dry,
clean place protected against frost and direct sunlight and inaccessible to children.
o Cover the device to protect it against dust and dirt.
o Do not place any heavy objects on the device.
- 35 -
7. Waste disposal
Old devices
The electric devices are marked with this symbol. You must not
dispose of electric devices with household waste. When the
device may not be longer used each consumer is obliged to
dispose of the device at the dedicated local collection point,
separately from household waste.
NOTE!
Electric devices should be used and disposed of properly to prevent the impact on
the environment.
• Disconnect the device from the power supply and remove the power cord from
the device.
Bartscher GmbH phone: +49 5258 971-0
Franz-Kleine-Str. 28 fax: +49 5258 971-120
33154 Salzkotten Service-Hotline: +49 5258 971-197
Germany www.bartscher.com
- 36 -
Loading...