Bartscher T160 Instruction Manual

Original

-

Gebrauchsanleitung

T160

103048

V1/1016

GB/UK

ENGLISH

Table of contents

1.Safety ........................................................................................................................ 16

1.1 Key to symbols ..................................................................................................... 16

1.2 Safety instructions ................................................................................................ 17

1.3 Proper use ............................................................................................................ 21

2. General information ................................................................................................ 22

2.1 Liability and Warrantees ....................................................................................... 22

2.2 Copyright protection ............................................................................................. 22

2.3 Declaration of conformity ...................................................................................... 22

3. Transport, packaging and storage......................................................................... 23

3.1 Delivery check ...................................................................................................... 23

3.2 Packaging ............................................................................................................. 23

3.3 Storage ................................................................................................................. 23

4. Technical data ......................................................................................................... 24

4.1 Overview of parts ................................................................................................. 24

4.2 Technical specification ......................................................................................... 24

5. Installation and operation ....................................................................................... 25

5.1 Installation ............................................................................................................ 25

5.2 Operation .............................................................................................................. 26

6. Cleaning ................................................................................................................... 27

7. Waste disposal ........................................................................................................ 28

Bartscher GmbH
Franz-Kleine-Str. 28
33154 Salzkotten phone: [phone]
Germany fax: [phone]

- 15 -

Read this instruction manual before using and
keep them available at all times!

This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.

Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.

In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.

The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.

Please keep these instructions and give them to future owners of the device.

1.Safety

This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.

All persons using the device must follow the recommendations and instructions
in this instruction manual.

1.1 Key to symbols

In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.

WARNING!

This symbol highlights hazards which could lead to injury.

WARNING!

This symbol highlights dangerous situations which could lead to injury or death.

- 16 -

HOT SURFACE!

This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!

CAUTION!

This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.

NOTE!

This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.

1.2 Safety instructions

•

The device can be used by children 8 years and up, as well as
by people with disabilities and those with limited experience/
knowledge as long as they are under supervision or have been
instructed on proper use of the device and its possible dangers.

Children should not play with the device. Cleaning and
maintenance cannot be performed by children younger than
8 years old and must be done under supervision. Children
under the age of 8 years old must be kept away from the

device and its power cord.

•

Never leave the device unattended when in use.

•

Only use the device indoors.

•

The device is not designed for use with an external timer or
remote control.

•

This device may only be operated in technically proper and safe
condition.

- 17 -

Prevent access of children to the package materials like plastic

•

bags and foamed polystyrene elements. Suffocation hazard!

•

Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the
device. Do not attempt to repair the device yourself.

•

Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous
for the user or lead to damages of the device or personal injury,
and further, the warranty expires.

•

To prevent hazards and to ensure optimum efficiency, no
modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.

DANGER! Electric shock hazard!

To avoid the hazard results please follow the safety instructions
below.

•

Never allow the power cable to come into contact with heat
sources or sharp edges. The power cable should not hang over
the side of the working surface. Ensure that no one can step on
or trip over the cable.

•

The power cable must not be folded, bent or tangled, and must
always remain fully unrolled. Never place the device or other
objects on the power cable.

•

Do not lay the power cable over carpets or other inflammable
materials. Do not cover the cable. Keep away the cable from
operating range.

- 18 -

Check the power cord regularly for damage. Do not use the

•

device if the power cord is damaged. If this cable is damaged, it
must be replaced by customer service or a qualified electrician in
order to avoid dangers.

•

The supply cable must be disconnected from the socket
only by pulling the plug.

•

Never carry or lift the device by the supply cable.

•

In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.

•

Never immerse the device, the power cord and the power plug
in water or other liquids.

•

Do not use any acid agents and make sure no water ingresses
the device.

•

Never operate the device with moist hands or standing on wet
floor.

•

Remove the plug from its socket:

-

when the device is not used,

-

in case of anomalies during operation,

-

before cleaning.

HOT SURFACE! Burn hazard!

To avoid the effects of this risk, follow the safety instructions
presented below.

•

The device surface gets very hot when the device is in use!
Do not touch it with bare hands. Hold the cups by ears while
removing them from the device.

- 19 -

The device remains hot also for some time after turning off, so

•

before cleaning or moving the device wait until it cools down.

•

Never move the device when it is switched on.

WARNING! Fire and explosion hazard!

To avoid the effects of this risk, follow the safety instructions
presented below.

•

To avoid the fire hazard and the damages of the device never
place the kitchen utensils, towels, paper, etc. on the device
surface.

•

Never use the device near flammable materials (such as
alcohol, spirits, petrol etc). High temperature may cause their
evaporation and due to contact with the ignition sources the
deflagration may occur, and in result the injuries and damages.

•

In case of fire before the fire extinguishing activities remove the
plug from the socket. Assure sufficient flow of fresh air.

Caution: Never use water for fire extinguishing when the device
is connected to the power supply. Electric shock hazard!

- 20 -

1.3 Proper use

The operational safety of the device is assured only in case of proper use, according
to the operation manual.

All technical activities like installation and maintenance must be performed by the
qualified service personnel only.

The device is intended for home use or in similar places such as:

→ in kitchens for store or office employees or in similar business areas;
→ in agricultural farms;
→ by guests of hotels, motels and other typical places of accomodation;
→ in Bed and Breakfast facilities.

The cup warmer is designed only for keeping cups warm.

CAUTION!

Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.

Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.

The operator is liable for all damages resulting from inappropriate use.

- 21 -

2. General information

2.1 Liability and Warrantees

All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.

The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.

If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.

CAUTION!

Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!

Manufacturer is not liable for any damages or faults caused by:

- violation of advice concerning operation and cleaning;

- use other than designed;

- alterations made by user;

- use of inadequate spare parts.

We reserve the right to make technical changes for purposes of developing and improving
the useful properties.

2.2 Copyright protection

The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.

NOTE!

The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.

2.3 Declaration of conformity

- 22 -

The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.

3. Transport, packaging and storage

3.1 Delivery check

Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.

Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages

can only be asserted within the effective period for complaints.

3.2 Packaging

Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.

NOTE!

If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.

Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.

3.3 Storage

Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.

Packages should be stored under consideration of the following:

- do not store outdoors,

- keep it dry and dust-free,

- do not expose it to aggressive media,

- do not expose it to direct sunlight,

- avoid mechanical shocks and vibration,

- in case of longer storage (> 3 months) make sure you check

the state of the packaging and the parts regularly, if required
refresh or renew.

- 23 -

1

4

4. Technical data

4.1 Overview of parts

Cup compartments

1

Base

2

ON / OFF switch with

3

integrated lamp (green)
Feet (4)

4

4.2 Technical specification

Name Cup warmer T160

Code No.:
Material: aluminium, plastic

Design:

103048

 maximum capacity: 2 x 8 cups
 maximum cup diameter: 90 mm
 cup compartment dimensions: Ø 95 mm, height 300 mm
 PTC heating
 ON / OFF switch with indicator

1

2

3

Power: 0.11 kW / 220-240 V~ 50/60 Hz
Temperature range: 47 °C to 52 °C
Dimensions: W 290 x D 210 x H 350 mm
Weight: 2.25 kg

We reserve the right to make technical changes!

- 24 -

5. Installation and operation

5.1 Installation

Positioning

• Unpack the device and remove the packing material.

CAUTION!

Never remove the nameplate and warning signs from the device.

• Put the device on an even, stable, dry and waterproof surface which is resistant to
high temperature.

• Never place the device on an inflammable surface.

• Never place the device at the edge of a table to avoid tilting or falling.

• Never put the device in a moist or wet area.

• Do not place the device near open flame, electric heaters or other heat source.

• Place the device so that the plug is easily accessible so as to quickly disconneet

the device if the need arises.

Connection

DANGER! Electric shock hazard!

The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Connect the device only to properly installed single
socket with protective terminal.

• The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

- 25 -

5.2 Operation

Before the first use

• Before use clean the device according to instructions in section 6 “Cleaning”.

• Prepare appropriate cups. Cups must be

clean and dry before putting in the device.

• Place prepared cups one in another in the
compartments.

• Compartments are designed for 8 cups each
of maximum diameter of 90 mm.

NOTE!

We recommend putting cups in the
compartments upside down.

Heating of cups

• Connect the device to the single grounded socket.

• Turn the device on with use of ON/OFF switch

(put it in position “I”). That switch is located on
the right side of device base (right figure).

• Cup warmer is heated automatically, temperature range is from 47 to 52°C.
Cups are kept warm as long as the device is turned on.

NOTE!

Optimum heating is obtained when the cup compartments are completely
filled and cups are placed one on another, upside down.

• Remove cups as required, holding them by ear.

HOT SURFACE!

Cup compartments are hot during operation. Maintain
caution while touching those surfaces to avoid burns.
Hold the cups by ears while removing them from the device.

- 26 -

• Turn the device off before filling with cups. Keep in mind that cups must be clean
and dry while filling the device.

WARNING! Injury hazard!
Never use the device when there is a liquid on it or inside.
To avoid electric shock, burns, and device damage in such

situation do not touch the device and immediately
disconnect it from the power supply (pull the plug!).

• When there are no cups in the device or it will not be used, turn it off with use of

ON/OFF switch (put in position “O”) and disconnect it from the power supply (pull
the plug!).

6. Cleaning

WARNING!
Before cleaning disconnect the device from the power

supply (pull the plug!).
Never use water jet to wash the device.
Make sure that no water gets into the device.

Cleaning of the device

o Clean the device regularly.
o After cooling down remove cups from the compartments.
o Wash the device base and compartments with use of soft, moistened cloth and gentle

cleaning agent.

o Use only soft cloth or sponge, never use any abrasive cleaning agents which may

scratch the device.

o Dry the device thoroughly with soft cloth.

- 27 -

Storage of the device

o If the device is not used for a longer time, clean it according to the aforementioned

description and store it in dry, clean place protected against cold, sun, and children. Do
not place any heavy objects on the device.

7. Waste disposal

Discarding old devices

At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.

WARNING!
To exclude any abuse and the dangers involved make the

waste device unfit for use before disposal. For that
purpose disconnect device from mains supply and remove
mains connection cable from the device.

CAUTION!

For the disposal of the device please consider and
act according to the national and local rules and
regulations.

Bartscher GmbH
Franz-Kleine-Str. 28
33154 Salzkotten phone: [phone]
Germany fax: [phone]

- 28 -