Bartscher Platform trolley TP100 Operating instructions

V1/0710
300.142
For mounting
For mounting
the castors
GB/UK
TECHNICAL DATA:
----------------------------------------------------------------------------------------
Name: Code number:
Material: Chrome nickel steel Size: W 560 x D 1050 x H 925 mm Platform size: W 560 x D 940 mm Carrying capacity: 200 kg Weight: 14.4 kg
Trolley / Platform trolley
300.142
----------------------------------------------------------------------------------------
Range of delivery / names of elements
1 x plate
1 x handle
2 x swivel castors, Ø 125 mm
2 x fixed castors, Ø 125 mm 16 x washers
16 x spring washers 16 x M6*25 Allen bolts
2 x washers 2 x spring washers 2 x M8*30 Allen bolts
Hex wrench
the handle
- 3 -
ASSEMBLY INSTRUCTIONS:
Unpack the individual elements and verify that all parts are complete. Remove all
packaging materials.
Installation of the trolley should start by attaching the
castors to the plate. To do this, place the plate on the floor. Install the swivel castors with the enclosed Allen bolts at the end of the plate, where the handle will be mounted. Between the bolt head and plate place a washer and a spring washer.
Attach the fixed castors at the other end
of the plate using the Allen bolts, washers and spring washers. Tighten the bolts with the hex wrench.
Place the plate with wheels on one side, and firmly screw the handle to the plate with the
Allen bolts, washers and spring washers.
Carefully set the trolley on the floor. Check the stability of the trolley. If necessary,
tighten the Allen bolts with the hex wrench.
NOTE!
After assembly remove the protective film!
Use only a soft cloth and a gentle liquid cleanser to clean the trolley. Never use abrasive agents that could scratch the surface.
Bartscher GmbH Franz-Kleine-Str. 28 D-33154 Salzkotten phone: +49 (0) 5258 971-0 Germany fax: +49 (0) 5258 971-120
- 4 -
Loading...