Bartscher Panorama 550L, 700550 Translation Of The Original Instruction Manual

V

1/1213

Bartscher Panorama 550L

700550

GB/UK

ENGLISH
Translation
of the original instruction manual

Read these instructions before using and keep
them available at all times!

1. General information ................................................................................................ 18

1.1 Information about the instruction manual ............................................................ 18

1.2 Key to symbols .................................................................................................... 18

1.3 Liability and Warrantees ...................................................................................... 19

1.4 Copyright protection ............................................................................................ 19

1.5 Declaration of conformity ..................................................................................... 19

2.Safety ........................................................................................................................ 20

2.1 General information ............................................................................................. 20

2.2 Safety instructions for use of the device .............................................................. 20

2.3 Intended use ....................................................................................................... 21

3. Transport, packaging and storage......................................................................... 22

3.1 Delivery check ..................................................................................................... 22

3.2 Packaging ........................................................................................................... 22

3.3 Storage ................................................................................................................ 22

4. Technical data ......................................................................................................... 23

4.1 Overview of parts ................................................................................................ 23

4.2 Technical specification ........................................................................................ 25

5. Installation and operation ....................................................................................... 25

5.1 Safety instructions ............................................................................................... 25

5.2 Installation and connection .................................................................................. 26

5.3 Operation ............................................................................................................ 27

6. Cleaning and maintenance ..................................................................................... 29

6.1 Safety advice ....................................................................................................... 29

6.2 Cleaning .............................................................................................................. 30

6.3 Safety instructions for maintenance .................................................................... 30

7. Possible Malfunctions ............................................................................................ 31

8. Waste disposal ........................................................................................................ 32

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]

- 17 -

1. General information

1.1 Information about the instruction manual

This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.

Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.

In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.

The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.

1.2 Key to symbols

In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.

WARNING!

This symbol highlights hazards, which could lead to injury.
Please follow the instructions very carefully and proceed with particular attention
in these cases.

WARNING! Electrical hazard!

This symbol draws attention to potential electrical hazards. If you do not follow
the safety instructions, you may risk injury or death.

CAUTION!

This symbol highlights instructions, which should be followed to avoid any risk of
damage, malfunctioning and/or breakdown of the device.

NOTE!

This symbol highlights tips and information, which have to be followed for
an efficient and trouble-free operation of the device.

- 18 -

1.3 Liability and Warrantees

All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.

The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.

If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.

NOTE!

Read this manual carefully and thoroughly before any operation of the device,
and especially before turning it on!

Manufacturer is not liable for any damages or faults caused by:

- violation of advice concerning operation and cleaning;

- use other than designed;

- alterations made by user;

- use of inadequate spare parts.

We reserve the right to make technical changes for purposes of developing and improving
the useful properties.

1.4 Copyright protection

The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.

NOTE!

The contents, texts, drawings, pictures and any other illustrations are copyright
and subject to other protection rights. Any person unlawfully using this
publication is liable to criminal prosecution.

1.5 Declaration of conformity

The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity.
If required we will be glad to send you the according declaration of conformity.

- 19 -

2.Safety

This section provides an overview of all important safety aspects.
In addition every chapter provides precise safety advice for the prevention of dangers

which are highlighted by the use of the above mentioned symbols.
Furthermore, attention should be paid to all pictograms, markers and labels on the

device, which must be kept in a permanent state of legibility.
By following all the important safety advice you gain an optimal protection against all

hazards as well as the assurance of a safe and trouble-free operation.

2.1 General information

This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.

Knowing the contents of the instruction manual as well as avoiding mistakes and thus
operating this device safely and in a fault-free manner is very essential to protect
yourselves from the hazards.

To prevent hazards and to ensure optimum efficiency, no modifications or alterations to
the device that are not explicitly approved by the manufacturer may be undertaken.

This device may only be operated in technically proper and safe condition.

2.2 Safety instructions for use of the device

The specifications regarding the industrial safety are based on the Regulations of the
European Union applicable at the time of manufacturing the device.

If the device is used commercially, the user is obliged to ensure that the said industrial
safety measures concur with the state of the rules and regulations applicable at the time
in question for the entire period of use of the device and to comply with the new
specifications.

Outside the European Union, the industrial safety laws applicable at the place of
installation of the device and the regional territorial provisions must be complied with.

Besides the industrial safety instructions in the instruction manual, the general safety and
accident prevention regulations as well as environment protection regulations applicable
for area of application of the device must be followed and complied with.

CAUTION!

o The device can be used by children 8 years and up, as well as by people with

disabilities and those with limited experience/knowledge as long as they are under
supervision or have been instructed on proper use of the device and its possible
dangers.

- 20 -

o Children should not play with the device.
o Cleaning and maintenance cannot be performed by children younger than 8 years

old and must be done under supervision.

o Children under the age of 8 years old must be kept away from the device and its

power cord.

o Please keep these instructions and give them to future owners of the device.
o All people using the device should follow the instructions and tips contained in these

instructions.

o Only use the device indoors.

2.3 Intended use

Safe operation is only guaranteed when using the device for its intended purpose.
Any technical interventions, as well as assembly and maintenance are to be made by a

qualified customer service only.
The device is intended for home use or in similar places such as:

- in kitchens for store or office employees or in other service locations;

- in suburban properties;

- by guests of hotels, motels and other places of accommodation;

-

in Bed & Breakfasts.

The Display fridge is intended only for cooling dishes and beverages.
Do not use the Display fridge for:

- storing flammable or explosive materials such as ether, petrol or glue;

- storing pharmeceutical products or conserved blood.

CAUTION!

Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use are
impossible.
The operator is liable for all damages resulting from inappropriate use.

- 21 -

3. Transport, packaging and storage

3.1 Delivery check

Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.

Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages

can only be asserted within the effective period for complaints.

3.2 Packaging

Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.

NOTE!

If you liked to dispose the packing, consider the regulations applicable in your
country. Supply re-usable packing materials to the recycling.

Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.

3.3 Storage

Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.

Packages should be stored under consideration of the following:

- Do not store outdoors.

- Keep it dry and dust-free.

- Do not expose it to aggressive media.

- Do not expose it to direct sunlight.

- Avoid mechanical shocks and vibration.

- In case of longer storage (> 3 months) make sure you check

the state of the packaging and the parts regularly.
If required refresh or renew.

- 22 -

4. Technical data

4.1 Overview of parts

②

⑪

⑩

⑨

③

①

④

⑤

⑥

⑦

⑧

Air inlet

①

Air outlet

②

Shelf (3)

③

LED lighting strips (4)

④

Glass door

⑤

ON/OFF switch

⑥

Digital temperature controller

⑦

Castors (4), 2 with brakes

⑧

Lower housing

⑨

Glass frame

⑩

Side glass panels

⑪

- 23 -

Grids

Grid height can be fully adjusted to the height of stored products. Follow the instructions
below to place grids at the desired height.

Grid guides

Grid bracket

1. Place the grid brackets in the front guides at
the desired height.

2. Set the grid in the rear guides, then place it
on the grid brackets at the front so that it
rests securely in the brackets.

Ventilation intake

Air circulates inside the display fridge, ensuring optimal air cooling inside the
device. Never block the area around the ventilation intake.

Ventilation exhaust

Releases circulating air. Never block the area around the ventilation exhaust.

- 24 -

4.2 Technical specification

Name

Code-No.:
Material: high-grade stainless steel

Design:
Cooling medium: R134a

Operational temperature: 0°C – 6°C
Capacity: 550 litres
Power: 0.65 kW / 230 V 50 Hz
Dimensions: W 850 x D 650 x H 1900 mm
Weight: 187.9 kg
Equipment: 3 shelves, chrome-plated metal

We reserve the right to make technical changes!

Display fridge Bartscher Panorama 550L

700550

all-round glazing, double safety glass;

1 door, hinged on the right

5. Installation and operation

5.1 Safety instructions

WARNING! Risk of electric shock!

The device must only be connected to a properly installed single socket with
protective contact.

Never remove the power cable by pulling the cable itself; always grab the plug
housing.

• Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.

• The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.

• Never place the device or other objects on the power cable.

• Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep

away the cable from operating range and do not dunk it into water.

• Do not use the device in case it does not function properly, has been damaged or
dropped.

- 25 -

• Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.

• Do not move or tilt the device when in operation.

• Avoid spraying the device with water, do not expose the device to atmospheric

precipitation or other moisture.

• Never operate the device with wet hands.

5.2 Installation and connection

Setup

• Unpack the device and remove packing material.

• Put the device in a secure place capable of supporting its weight.

• Never place the device on a flammable surface.

• To avoid malfunctions of the compressor, never tilt the device to an angle greater

than 45º during transport and setup.

• Do not locate the device near open flames, electric ovens, heaters or other sources
of heat such as direct sunlight. High temperatures can damage the device’s surface,
reduce cooling power and increase energy consumption.

• Maintain at least 10 cm from walls and other objects to ensure proper circulation of
air around the device.

• Never cover the device’s ventilation ducts.

• Do not put the device in spaces with high ambient humidity, as this may damage the

device.

• Do not drill holes in the device and do not mount any objects on it.

• Do not place any heavy objects on the device.

• After positioning in appropriate place block the front castors with brakes.

Connecting the device

WARNING! Hazard via electrical current!

The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with

that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!

• Before beginning to use the device, leave it in place for at least two hours before
connecting it to a source of electricity.

- 26 -

⑭ ⑬

⑰

⑱

• After a power failure or removal of the plug, leave the device unconnected for
at least 5 minutes.

• The electrical circuit must be secured to a minimum of 16A. Only connect the device
to a wall socket, do not use splitters or power strips.

• Ensure the device’s plug is easily accessible if it becomes necessary to quickly
disconnect the device.

5.3 Operation

• After unpacking the device and before connecting it, clean the device following the
instructions in 6.2 "Cleaning".

• Connect the device to the grounded single socket and start it with use of ON/OFF
switch. The red light, integrated with the switch, will come on.

• The digital display will show the temperature and the LED cooling indicator will
come on.

• The device should reach the set temperature before food and beverages are
placed inside.

Digital temperature regulator

⑫

⑮

⑯

Increase temperature button

⑫

LED cooling indicator

⑬

LED defrost indicator

⑭

LED lighting button

⑮

Settings button

⑯

Digital display

⑰

Decrease temperature button

⑱

- 27 -

LED cooling indicator

LED defrost indicator

LED indicators

This indicator shines when the compressor is active,
goes off when the desired temperature has been reached and

flashes during a delay.

This indicator shines during the defrost process,
goes off when the defrost process is finished and
flashes during extended defrost.

Setting the desired temperature

• The device’s temperature range is from 0 °C to 6 °C.

• To set or adjust the desired temperature:

 press the button, after which the current value will begin flashing;
 raise or lower the value as desired by pressing or ;
 confirm the set temperature by pressing .

• If no button is pressed within the following 10 seconds, the current temperature
inside the device will be shown on the digital display.

Turning the lighting on/off

• The device is equipped with 4 LED lighting strips (2 at the front and 2 at the rear).

• The interior LED lighting can be activated by pressing the button .

• To turn the lighting off, press again.

Automatic defrost

The device is automatically defrosted 4 times every 24 hours.

Manual defrost

If you wish to defrost the device outside of its normal cycle, press and hold for
over 6 seconds to activate manual defrost.

- 28 -

The LED defrost indicator

will come on and will flash until the end of the defrost

process. After defrost has finished, the LED defrost indicator will go off and the next
defrost cycle will begin in 6 hours.

• In case of planned break in the device operation turn it off with use of ON/OFF
switch and disconnect from the power supply (remove the plug from the socket!).

Tips for the user

• To minimize loss of cold in the device, the door should be closed as quickly as
possible and not opened unless necessary.

• Do not block the ventilation ducts. Air must circulate freely to ensure proper cooling.

• Articles inside the device must be kept at appropriate distances from one another.

Cooling effectiveness is reduced when they are too close together.

• Adjust the height of grids to the size of articles stored.

• Allow warm dishes to reach room temperature before placing inside the device.

• In the event of a power failure, do not open the door unless necessary to avoid loss

of cold air.

• After a power failure or unplugging the device, do not connect it to a power source for
at least 5 minutes.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been

disconnected from power supply and has cooled down.

o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and

the plug in water or other liquids.

CAUTION!

The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

- 29 -

6.2 Cleaning

o Regularly clean the Display fridge.
o Remove the grids and wash them with a mild cleaning agent and soft cloth.
o Wash the interior and exterior of the Display fridge with warm water, a soft cloth and

mild cleaning agent.

o Rinse with clean water.
o Never use aggressive cleaning substances such as scouring powder, substances

containing alcohol or solvents that could damage the device’s surface.

o Always use soft cloths, never use harsh cleaning instruments that could scratch the

device.

o Dry and polish the device’s surface after cleaning with a dry cloth.

If the Display fridge will remain unused for a longer period of time:

o remove the plug from its socket;
o remove all articles from the Display fridge;
o clean the interior and exterior of the Display fridge; remove all water and potential

sources of mould;

o leave the door open to allow the Display fridge to dry.

6.3 Safety instructions for maintenance

o Inspect the power cable regularly for damage. Never use the device if the cable is

damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.

o In case of damage or malfunction, please contact your stockist or our customer

service centre. Pay attention to the troubleshooting tips in pt. 7.

o Only a qualified technician and using original spare parts and accessories should

carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.

- 30 -

7. Possible Malfunctions

Problem Cause Solution

No cooling
effect at all.

Cooling effect
insufficient.

Heavy noise.

The compressor
does not switch
off automatically.

• Plug not connected to
socket.

• Defective fuse.

• Power breakdown.

• Direct sunlight or heat

sources nearby.

• Bad air circulation around
the device.

• Doors are not closed
properly or have been open
for too long.

• Door sealing is damaged or
deformed.

• Interspaces between the
foods are too small or too
many foods are stored.

• Air inlet and/or air outlet
blocked.

• The device does not stand
on an even surface.

• The device touches walls
or other items.

• The device is too full.

• Door has been open for too

long.

• Connect the plug properly.

• Check the power supply.

• Check the power supply.

• Remove the device from the

heat source.

• Arrange sufficient space
between walls and other
items.

• Properly close the doors.
Keep the door opening
periods low. Contact the
retailer.

• Contact retailer

• Arrange sufficient space

between the foods in the
device and remove
dispensable foods.

• Keep free/ unblock the air
inlet/outlet from (parts of)
food or other material.

• Set the device on an even
surface.

• Arrange sufficient space
between device and walls
and/or other items.

• Remove dispensable foods.

• Keep the door opening

periods low.

The aforementioned problems are only examples. If these or other problems
appear, turn the device off immediately and stop using it. Ask for help from
qualified specialist personnel in examining and repairing the device.

- 31 -

The following are not examples of damage:

1. The sound of flowing water: this happens during normal use, and results from the
flow of coolant trough the device.

2. Condensation drops on side glass panes are normal when the ambient humidity is
high. Remove the water with a soft, dry cloth.

8. Waste disposal

Discarding old devices

At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.

WARNING!

To exclude any abuse and the dangers involved make the waste device unfit for
use before disposal. For that purpose disconnect device from mains supply and
remove mains connection cable from the device.

NOTE!

For the disposal of the device please consider and act
according to the national and local rules and

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]

regulations.

- 32 -