Bartscher MX 235, 130115 User Manual

Original-Gebrauchsanleitung

V3/1118

MX 235

130115

GB/UK

ENGLISH

Table of contents

1.Safety ........................................................................................................................ 20

1.1 Key to symbols ..................................................................................................... 20

1.2 Safety instructions ................................................................................................ 21

1.3 Proper use ............................................................................................................ 25

2. General information ................................................................................................ 26

2.1 Liability and Warrantees ....................................................................................... 26

2.2 Copyright protection ............................................................................................. 26

2.3 Declaration of conformity ...................................................................................... 26

3. Transport, packaging and storage......................................................................... 27

3.1 Delivery check ................................................................ ...................................... 27

3.2 Packaging ............................................................................................................. 27

3.3 Storage ................................................................................................................. 27

4. Technical data ......................................................................................................... 28

4.1 Overview of parts ................................................................................................. 28

4.2 Technical specification ......................................................................................... 29

5. Installation and operation ....................................................................................... 29

5.1 Assembly und disassembly .................................................................................. 29

5.2 Start-up and operation .......................................................................................... 32

6. Cleaning ................................................................................................................... 33

7. Possible Malfunctions ............................................................................................ 35

8. Waste disposal ........................................................................................................ 36

Bartscher GmbH phone: [phone]
Franz-Kleine-Str. 28 fax: [phone]
33154 Salzkotten Service-Hotline: [phone]
Germany www.bartscher.com

- 19 -

Read this instruction manual before using and
keep them available at all times!

This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.

Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.

In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.

The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.

Please keep these instructions and give them to future owners of the device.

1.Safety

This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.

All persons using the device must follow the recommendations and instructions
in this instruction manual.

1.1 Key to symbols

In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.

WARNING!

This symbol highlights hazards which could lead to injury.

WARNING!

This symbol highlights dangerous situations which could lead to injury or death.

- 20 -

CAUTION!

This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.

NOTE!

This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.

1.2 Safety instructions

 The device is not intended for use by individuals (including

children) with physical or mental disabilities, insufficient
experience, and/or insufficient knowledge unless such persons
are under the care of a person responsible for their safety or
have received instructions regarding appropriate use of the
device.

 Children should be observed to ensure that they are not playing

with or starting the device.

 Never leave the device unattended when in use.
 Only use the device indoors.
 The device may be operated only when it is in good working

order and is safe to use. In case of any malfunction, disconnect
the device from the power supply (pull the plug from the socket)
and call the technical service.

 Prevent access of children to the package materials like plastic

bags and foamed polystyrene elements. Suffocation hazard!

- 21 -

 Only a qualified technician and using original spare parts and

accessories should carry out repairs and maintenance of the
device. Do not attempt to repair the device yourself.

 Do not use any accessory or spare parts that have not been

recommended by the manufacturer. These can be dangerous
for the user or lead to damages of the device or personal injury,
and further, the warranty expires.

 To prevent hazards and to ensure optimum efficiency, no

modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.

DANGER! Electric shock hazard!

To avoid the hazard results please follow the safety instructions
below.

 Never allow the power cable to come into contact with heat

sources or sharp edges. The power cable should not hang over
the side of the working surface. Ensure that no one can step on
or trip over the cable.

 The power cable must not be folded, bent or tangled, and must

always remain fully unrolled. Never place the device or other
objects on the power cable.

 Do not lay the power cable over carpets or other inflammable

materials. Do not cover the cable. Keep away the cable from
operating range.

 Check the power cord regularly for damage. Do not use the

device if the power cord is damaged. If this cable is damaged, it
must be replaced by customer service or a qualified electrician in
order to avoid dangers.

 The supply cable must be disconnected from the socket

only by pulling the plug.

- 22 -

 Never carry or lift the device by the supply cable.
 In any case do not open the device housing. In case of

electrical or mechanical modifications the electric shock
hazard will occur.

 Do not use any acid agents and make sure no water ingresses

the device.

 Never operate the device with moist hands or standing on wet

floor.

 Remove the plug from its socket:

- when the device is not used,

- in case of anomalies during operation,

- before cleaning.

WARNING! Danger of injury!

To avoid injury, follow the safety instructions below.

 Never touch the device rotating parts during work.
 When the device is turned on, never place in the pot the object

or products having properties other than foreseen for the correct
application, e.g. bones, frozen food or non-food products, like
scarves, etc.

 Never use, hold or operate the device in places other than

foreseen for its correct operation, do not operate with one
hand.

- 23 -

 When the device is turned on, other persons must not press

the food products or ingredients towards the pot bottom, as
well as generally place hands or other body parts in the pot.

 Never immerse the device in the pot with processed food

products deeper than the immersion mark.

 Never remove the device from the pot before its complete stop

and never earlier than 10 seconds from turning off.

 Never remove the protective elements and safety labels from

the device, either partially or completely.

 Never use the device when all conditions assuring elimination

of the residual risk are not fulfilled.

WARNING! The residual risk results from removing of

permanent covers and tampering with damaged/used parts!

 The operating person absolutely must not attempt to open or

remove the permanent covers or protective elements.

 During completion, maintenance and cleaning and other similar

manual activities, connected with placing hands or other body
parts in the hazardous areas, there is the residual risk which
may result in:

1. hitting the device parts,

2. abrasion and/or scratches due to contact with rough
device parts,

3. injuries with sharp parts,

4. cuts due to contact with sharp parts.

- 24 -

 Due to necessity of placing hands in the vicinity of the knife

during cleaning or removing the residuals there is a residual
risk consisting in the possibility of injuries with sharp parts.

 Therefore the operating and maintaining persons must be

trained in range of operations with removed covers and

must be informed of resulting hazards, as well as authorized
by the responsible person.

 They must also use appropriate personal protective measures

or wear the anti-cut gloves.

1.3 Proper use

CAUTION!

This device has been designed and constructed for the industrial use and
should be operated only by the qualified personnel in kitchens.

The operational safety of the device is assured only in case of proper use, according
to the operation manual.

All technical activities like installation and maintenance must be performed by the
qualified service personnel only.

The stick mixer is designed only for pureeing, emulsifying and mixing hot and
cold foods.

It allows for preparation of soups, puree, creams, marzipan mass, cheese creams,
etc. directly in the pot.

CAUTION!

Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.

Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.
The operator is liable for all damages resulting from inappropriate use.

- 25 -

The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.

2. General information

2.1 Liability and Warrantees

All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.

The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.

If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.

CAUTION!

Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!

Manufacturer is not liable for any damages or faults caused by:

- violation of advice concerning operation and cleaning;

- use other than designed;

- alterations made by user;

- use of inadequate spare parts.

We reserve the right to make technical changes for purposes of developing and improving
the useful properties.

2.2 Copyright protection

The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.

NOTE!

The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.

2.3 Declaration of conformity

- 26 -

If you liked to dispose the packing, consider the regulations applicable
in your country. Supply re-usable packing materials to the recycling.

3. Transport, packaging and storage

3.1 Delivery check

Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.

Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages

can only be asserted within the effective period for complaints.

3.2 Packaging

Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.

Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.

3.3 Storage

Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.

Packages should be stored under consideration of the following:

- do not store outdoors,

- keep it dry and dust-free,

- do not expose it to aggressive media,

- do not expose it to direct sunlight,

- avoid mechanical shocks and vibration,

- in case of longer storage (> 3 months) make sure you check

the state of the packaging and the parts regularly, if required
refresh or renew.

- 27 -

①

ON/OFF switch

②

Quick-coupling

③

Body with motor

④

Supply cable

⑤

Retaining flange

⑥

Mixing stick

⑦

Blade cover

② ⑥ ⑤ ④ ③ ⑦ ①

4. Technical data

4.1 Overview of parts

Application and subassemblies

The device consists of the electric motor, placed in the plastic casting (independent
device body). The mixing stick shank is placed on the quick-coupling with use of
retaining flange and fixed to the motor shaft in the rotary way.

Place the planned food in the dish and holding the device with both hands in
appropriate places (see drawing on page 32):

1. place the device with fixed mixing stick in the dish or pot;

2. start the device and do not stop it until the product is prepared;

3. turn the device off and put in appropriate place.

- 28 -

Name

Stick mixer MX 235

Code-no.:

130115

Material:

housing: plastic, orange
removable mixing stick: stainless steel
retaining flange: plastic

Power:

0.25 kW / 230 V 50-60 Hz

Degree of protection:

IPX3

Rotary speed adjustment:

continuous, max. 15,000 RPM

Dimensions:

Ø 75 mm, total length: 520 mm,
mixing stick length: 250 mm

Cable length:

1.8 m

Weight:

1.35 kg

4.2 Technical specification

We reserve the right to make technical changes!

5. Installation and operation

5.1 Assembly und disassembly

The device operation must be ordered only to the authorized and properly trained

personnel, having sufficient technical experience.
Before the device activation:

- thoroughly read the technical manual,

- become familiarized with the protective devices

and emergency mechanisms, as well as their
locations and operation methods.

Operation of the device parts designed for protection by the unauthorized persons
may cause malfunctions or hazard for the operating person. The operating person

must be properly trained, informed of the residual risk and correct operation.

WARNING!

All operations connected with assembly/disassembly of
each device part must be performed with motor turned off
and plug removed from the socket.

- 29 -

1. Place the retaining flange (5)
of the mixing stick shank (6)
on the quick-coupling (2) of
the device body (3).

2. Rotate the mixing stick shank
(6) anticlockwise, so it is
connected with the device
body (3) in a rigid way.

Follow the instructions on
the device body!

② ① ⑥ ⑤ ③

The device assembly consists of a few operations:

The disassembly is performed as above, but in opposite order.

Start

The impulse start is performed only by pressing the appropriate ON/OFF button:
operation only with pressed button

No power

In case of power supply failure or after disconnecting the device from the supply it may
be restarted after following the procedure of start-up after the power restoration or

connecting the device to the supply installation.

Connection

DANGER! Electric shock hazard!

The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see type label).
Connect the device only in case of compliance!

- 30 -

Control

Procedure

Make sure that:

- there are no foreign

objects in the pot

Visual inspection in order to make sure that there
are no foreign objects in the pot, like tools, towels,
etc., or any non-food products. Remove such
objects if found.

Check the cleanness of:

- external parts of the device

- surfaces of equipment

- internal parts of the device

Before the operation of the device all surfaces of
mentioned parts must be inspected visually for their
cleanness.

In case of mould or other contamination clean the
parts according to section 6 “Cleaning“.

Check the condition of:

- permanent protective

covers

- device body

All permanent covers must fulfil their functions.
Perform the visual inspection of all mentioned parts
in order to make sure that their internal surfaces are
not damaged. After noticing the first symptoms of
wear/damage the parts must be immediately
replaced. Contact the service company.

Check the operational
condition of:

- controlling/protective parts

- control system.

All systems must fulfil their designed functions.
Use the systems in such way that they operate in
the expected way.

The parts revealing the first symptoms of wear or
damage must be immediately replaced. Contact the
service company.

Make sure that:

- there are no strange noises

after start-up

In case of noticing any strange noises during the
inspection, indicating e.g. seizure or mechanical
fractures, turn the device off immediately and contact
the service company.

 The power supply circuit with the socket must be protected by the fuse at least

16A. Only connect the device directly to the wall socket, do not use any extension
cords or power strips.

 Place the device so that the plug is easily accessible and can be quickly removed

from its socket in case of necessity.

Inspection before start-up

- 31 -

1. Positive result of inspection in range of preparation;

2. Positive result of inspection in range of electric supply;

3. Connection of plug to appropriate socket;

4. Positive result of inspection in range of assembly;

5. Positive result of inspection in range of control before
start-up;

6. Positive result of inspection in range of condition of all
protective devices.

7. Place the food products manually in the pot.

8. Holding the device with both hands in

appropriate places:

a. put the mixing stick in the pot.

b. start the device with use of ON/OFF switch, which

must be pressed until all food articles are processed.

CAUTION!

Periodically check the rubber seal under the
blade (fig. on the right) and replace when
damaged or worn.
Good condition of the seal prevents penetration
of processed products into the device, which
may lead to damages.

Rubber seal

5.2 Start-up and operation

Start-up

The device must be started according to the instructions below and in the specified
order.

9. When the processed food articles obtain desired properties, turn the device off and
put on appropriate work surface.

10. Remove the processed product from the pot: pour it into appropriate dish, holding
the pot with both hands.

WARNING!

Never immerse the device in the pot with processed food
products deeper than the immersion mark. Never start the
device on the idle run.

- 32 -

CAUTION!

Remember to firmly tighten the blade
to the agitator shaft using a grub screw
(fig. on the right).

Grub screw

Blade

Deactivation

The device deactivation consists of the following operations:

1. wait for the end of processing or obtaining the required

properties of the product before deactivation,

2. stop the device by releasing appropriate button,

3. put the device on appropriate work surface,

4. remove the plug from the socket;

5. perform cleaning.

6. Cleaning

WARNING!

Disconnect the device from the power supply
(unplug!) before cleaning.

Never clean the device with use of water jet!
Be careful and do not let the water into the device.
Do not use the pressure steam washers!
Do not direct the pressurized air jet to the areas with flour
and generally towards the device.

The device must not be cleaned with use of the following products:

 cleaning agents containing chlorine (also diluted) or chlorine-based, like: sodium

hypochlorite, hydrochloric acid, pipe cleaners, marble cleaners, scale removers,
etc. They may damage the steel surface and cause irremovable stains or corrosion.
Such products may become oxidized and in some cases cause pits in steel;

- 33 -

 metal plates, brushes or polishing discs from other materials or alloys (e.g. popular

steel, aluminium, brass, etc.) or tools used previously for cleaning of other metals
or alloys;

 abrasive cleaning powders;
 petrol, diluents, flammable and/or corrosive fluids;
 silver cleaners.

o The device must be cleaned after each working day, before the daily use, or more

frequently when required.

o All surfaces and parts of the device having contact with food, or the areas of contact

with food (external and internal surfaces of tools) and the spray areas (upper surface
of equipment fixed to the device and external surface of the device), must be cleaned
and disinfected according to the instructions below. In case of disassembly of tools
follow the instructions in section 5.1 ” Assembly and disassembly” .

o Clean the surfaces from any food residuals (e.g. with use of plastic scraper).

WARNING! Risk of injury!

The mixing stick blade is very sharp and may cause injuries!
Never touch the blade with bare hands!
Always use the protective gloves during cleaning!

o All surfaces of contact with food products and spray areas should be cleaned with

use of moist cloth (non-dripping) and warm water with gentle cleaning agent.
Use special agents for steel, only in liquid form (do not use creams or abrasive
pastes), and without chlorine. It is allowed to use the denatured alcohol for
degreasing.

o Never wash the device or tools in the dishwashing machine.
o Rinse with clean warm water, then dry all areas of contact with food products and

spray areas with use of soft, lint-free cloth.

o In case of longer breaks in use cover all steel areas (especially stainless steel)

with large amount of vaseline oil using the cloth in order to protect them with
additional layer. Parts should be stored wrapped in soft, lint-free cloth.

- 34 -

Problem

Cause

Solution

The device does
not work: knife
does not rotate or
cuts incorrectly

 No power.

 The device is not

connected to the power
supply.

 The ON/OFF switch is

damaged.

 Check and restore the

power supply.

 Connect the plug to the

electric socket.

 Contact the service

company.

Interruption
during work

 Thermal switch tripped due

to too long operation /
overload.

 It is not possible to identify

the cause.

 Wait for the device to cool

and restart work.

 Contact the service

company.

Storage

o If the device is not used for any lengthy period, clean it according to the

aforementioned description and store it in dry, clean place protected against
cold, sun and children. Do not place any have objects on the device.

7. Possible Malfunctions

In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.

If you cannot remove the malfunctions:

- do not open the body,

- notify the customer service point or contact the sales agent,

while providing the following information:

 type of malfunction;
 article and serial number (rating plate of the device).

- 35 -

The electric devices are marked with this symbol. You must not
dispose of electric devices with household waste. When the
device may not be longer used each consumer is obliged to
dispose of the device at the dedicated local collection point,
separately from household waste.

NOTE!

Electric devices should be used and disposed of properly to prevent the impact on
the environment.

 Disconnect the device from the power supply and remove the power cord from

the device.

8. Waste disposal

Old devices

Bartscher GmbH phone: [phone]
Franz-Kleine-Str. 28 fax: [phone]
33154 Salzkotten Service-Hotline: [phone]
Germany www.bartscher.com

- 36 -