KV1 Classic
190052
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Technical Support Hotline: +49 5258 971-197
www.bartscher.com
Version: 4.0
Date of preparation: 2020-05-12
EN
Original instruction manual
1 Safety ............................................................................................................ 2
1.1 Explanation of Signal Words .................................................................... 2
1.2 Safety instructions.................................................................................... 3
1.3 Intended Use ........................................................................................... 5
1.4 Unintended Use ....................................................................................... 6
2 General information ....................................................................................... 6
2.1 Liability and Warranty .............................................................................. 6
2.2 Copyright Protection ................................................................................ 7
2.3 Declaration of Conformity ........................................................................ 7
3 Transport, Packaging and Storage ................................................................ 8
3.1 Delivery Check ......................................................................................... 8
3.2 Packaging ................................................................................................ 8
3.3 Storage .................................................................................................... 8
4 Technical Data ............................................................................................... 9
4.1 Technical Specifications .......................................................................... 9
4.2 List of Components of the Appliance ..................................................... 11
4.3 Functions of the Appliance ..................................................................... 13
5 Installation and operation ............................................................................ 14
5.1 Installation .............................................................................................. 14
5.2 Operation ............................................................................................... 17
6 Cleaning and Descaling ............................................................................... 25
6.1 Safety Instructions for Cleaning ............................................................. 25
6.2 Cleaning ................................................................................................. 25
6.3 Descaling ............................................................................................... 36
7 Possible Malfunctions .................................................................................. 41
8 Disposal ....................................................................................................... 42
190052 1 / 44
Safety
EN
Read this instruction manual before using and keep it available
at all times!
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
Diese Bedienungsanleitung beschreibt di e Installation, Bedienung und Wartu ng des Geräts und gilt als wichtige Infor mationsquelle und Nachschlagewer k. Die Kenntnis aller enthaltenen Sicherh eitshinweise und Handlungsanweisu ngen schafft die Voraussetzung f ür das sichere und sachgerechte Ar beiten mit dem Gerät. Darüber hinaus müssen die für den Einsatzbereich des Geräts geltenden örtlichen Unfallverh ütungsvorschriften und allgemeinen Sicherheitsbestimmungen eingehalt en werden. Diese Bedienungsanleitung is t Bestandteil des Produkts und muss in unmittelbarer Nähe des Geräts für das In¬stallations-, Bedienu ngs-, Wartungs- und Reinigungspers onal jederzeit zugänglich auf¬bewahrt werd en. Wenn das Gerät an eine dritt e Person
weitergegeben wird, muss die Bedienungsa nleitung mit ausgehändigt werden.
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
2 / 44 190052
Safety
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
, die
1.2 Safety instructions
Electrical Current
• Too high a mains voltage or incorrect installation may cause electric shock.
• The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
• To avoid short-circuit, the appliance should be kept dry.
• If there are malfunctions during operation, disconnect the appliance from the
power supply.
• Do not touch the appliance’s plug with wet hands.
• Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
• Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
• Do not transport the appliance, holding it by the power cord.
• Do not allow the power cord to come into contact with heat sources or sharp
edges.
• Do not bend, pinch nor knot the power cord.
190052 3 / 44
Safety
EN
• Always completely unwind the power cord.
• Never place the appliance or other objects on the power cord.
• Always take hold of the plug to disconnect the appliance from the power supply.
Flammable Materials
• Never subject the appliance to contact with high temperature sources, e.g.:
oven, furnace, open flame, heat generating devices, etc.
• To avoid fire hazard, clean the appliance regularly.
• Do not cover the appliance with, e.g., aluminium foil or cloths.
• Use the appliance only with materials designated to this end and with correct
temperature settings. Materials, groceries and left-overs remaining in the
appliance may catch fire.
• Never use the appliance near flammable or inflammable materials, e.g.: petrol,
spirit, alcohol, etc. High temperature triggers evaporation of these materials,
and, as a result of contact with sources of ignition, an explosion may occur.
• In case of fire, disconnect the appliance from the power supply before
attempting suitable fire-extinguishing actions.
• Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
Hot Surfaces
• Surfaces of the appliance become hot during operation. Burning hazard! High
temperature remains for some time after switching the appliance off.
• Do not touch any hot surfaces of the appliance. Use the provided handling
elements and holders.
• You may transport and clean the appliance after it cools down entirely.
• It is prohibited to sprinkle hot surfaces with cold water or flammable liquids.
4 / 44 190052
Safety
EN
Health hazard due to germs!
• The water tank must be regularly emptied and disinfected to eliminate the
possibility of accumulation of harmful and dangerous germs.
Supervised Usage only
• Only supervised appliance may be used.
• Always remain in an immediate vicinity of the appliance.
Operating Personnel
• The appliance may only be operated by qualified personnel and trained
specialist personnel.
• This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
• Children should be supervised to ensure that they are not playing with or
switching on the appliance.
Improper use
• Unintended or prohibited use may cause damage to the appliance.
• The appliance may only be used in a technically flawless condition, providing for
safe use.
• The appliance may only be used with connections in a technically flawless
condition, providing for safe use.
• The appliance may only be used clean.
• Use only original spare parts. Never attempt to repair the appliance on your
own.
• Do not attempt to modify nor alter the appliance.
1.3 Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
– Preparation of various types of coffee beverages, for example: coffee,
cappuccino, espresso, etc.
190052 5 / 44
General information
EN
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
2 General information
2.1 Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
Our coffee makers are constructed with components that are subject to wear and
tear. As a rule, with correct maintenance of coffee makers, the following
components that are subject to wear and tear sustain dispensing of the following
amounts of beverages:
– pumps: 12.000 dispensing instances
– drain valve: 15.000 dispensing instances
– brewing unit, grinder and seals: 20.000 dispensing instances
Failures of these components that are subject to wear and tear after their reaching
reference dispensing amounts are not considered to be coffee maker flaw.
6 / 44 190052
General information
EN
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.
190052 7 / 44
Transport, Packaging and Storage
EN
3 Transport, Packaging and Storage
3.1 Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.
8 / 44 190052
Technical Data
EN
Name:
Automatic coffee machine KV1
Classic
Item No.:
190052
Material:
Plastic
Grinder material:
Steel
Number of brewing unit groups:
1
Water tank volume, in l:
1,8
Coffee container volume, in g:
1.000
Programs:
6
Pump pressure, in bar:
19
Outlet, height regulation,
from – to, in mm:
100 - 160
Dregs container volume, no. of cups,
approx.:
35
Designed for cups/day:
80
No. of cups of 120 ml/h, max.:
40
Minimum brewing volume, in ml:
25
Power supply:
2,7 kW / 230 V / 50-60 Hz
Dimensions (W x D x H) in mm:
305 x 330 x 580
Weight in kg:
17,4
4 Technical Data
4.1 Technical Specifications
We reserve the right to implement technical modifications!
190052 9 / 44
Technical Data
EN
Version / Characteristics
• Fully automatic
• Control: electronic
• Descaling signal
• Fill level indicator
• ON/OFF switch
• Indicator light: ON/OFF
• Settable parameters: grinding coarseness with 5-level scale, coffee dosing,
amount of water, water temperature
• Water supply: 2 options
– Water tank
– Fixed water supply ½"
• Detachable water tank
• Hot water function
• Hot milk function
• Grinder: conical burr grinder
• Pressure system: piston pressure
• Milk frother
• Cleaning program
• Programs: 6 with the possibility of individual settings
• Display: programs, status, error messages, maintenance messages
• Automatic switch-off
• Dregs container is dishwasher safe
• Ground coffee options: per cups, manually, 5–14 g
• 2 cups function
• Milk supply:
– external via a hose
– controlled flow rate (temperature regulation)
• Cup counter (per program and total)
• Base plate with a cut-out for automatic residue removal (in combination with
KV1 dregs container with discharge opening — available as an option)
• The set includes: 1 milk hose, 50 cm; 1 milk hose with flow controller, 50 cm; 1
water supply hose, 150 cm
10 / 44 190052
Technical Data
EN
4.2 List of Components of the Appliance
190052 11 / 44
Technical Data
EN
1. Coffee container cover
2. Coffee container
3. Water tank cover
4. Water tank
5. Drip grate
6. Dregs container
7. Drip tray
8. Grinder cover
9. Grinding coarseness adjustment knob
10. Control panel
11. Housing
12. Brewing unit
13. Hot water outlet
14. Coffee outlet
15. Milk hose with flow controller
16. Interface
17. Mains switch
18. Power cord socket
19. Water connection
1. ON/OFF button
2. 'Back' button
3. 'Menu / OK' button
4. ESPRESSO button
5. AMERICANO button
6. HOT WATER button
7. 'Up' button
8. 'Down' button
9. Display
10. CAPPUCCINO button
11. COFFEE LATTE button
12. MACCHIATO button
Description of components
Control Panel
12 / 44 190052
Technical Data
EN
Description
Art. no.:
KV1 dregs container with
discharge opening
Designed for Bartscher KV1
Classic and KV1 Comfort
automatic coffee machines
Disposing of dregs directly into a
waste bin
Material: plastic
Dimensions: W 80 x D 155 x H 160
mm
Weight: 0.09 kg
190060
KV1 water drain hose
Designed for Bartscher KV1
Classic and KV1 Comfort
automatic coffee machines
Length 1.5 m
Features: for use with dregs
container and KV1 dregs container
with discharge opening.
Dimensions: W 35 x D 1,500 x H
40 mm
Weight: 0.37 kg
190068
Auxiliary equipment (not included in the delivery!)
4.3 Functions of the Appliance
The appliance is designed for preparing various coffee beverages, for example:
coffee, espresso, cappuccino, or latte macchiato, with the use of coffee beans and
cold water, and it is ideal for cafés, cafeterias and offices.
190052 13 / 44
Installation and operation
EN
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
5 Installation and operation
5.1 Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
• Never place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
• Mind the sufficient clearance from the walls and other flammable objects or
objects that are prone to discolouration. This clearance must be at least 5 cm
from the back and both sides, and 15 cm from the top. Note the fire safety
provisions at the place of installation.
• When in operation, the appliance may not be installed in a cabinet.
14 / 44 190052
Installation and operation
EN
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Do not use the appliance with an external timer or remote control.
Water connection
For the water supply, the appliance comes with a factory-installed water tank.
Should such a need arise, the appliance can be connected to mains piping.
In order to utilise the connection, consider the following information:
– max. input water pressure is 3 bar
– min. input water pressure is 1 bar
Important Indication:
Starting with water hardness of 5° dH (German degrees), a water softening
device should be installed. We recommend the following products from
our range:
– Water filtering system for coffee makers, art. No. 109881
– Water softening device, WEH1350, art. No. 109878
190052 15 / 44
Installation and operation
EN
1. Connect one end of the delivered water
supply hose (with 1/4" thread) to the water
connection stub at the back face of the
appliance, and the second end (with 1/2"
thread) with the water mains system
connection.
1. Press the 'MENU / OK' button and
hold it for 3 seconds, and with the
'∧ ' and '∨ ' setting buttons select the
'Machine' option. Confirm the
selection with 'MENU / OK' button.
2. Using the '∧' and '∨' setting buttons,
select 'Water supply'.
3. Confirm the selection with 'MENU /
OK' button.
4. Select the 'Tap water' option.
5. To end with and save the settings,
press the 'MENU / OK' button.
6. Then, press the 'Back' button, to
leave the menu.
To supply the appliance from water mains system, perform the following steps:
Step 1: Connecting the water hose
Step 2: Setting the water supply mode
Step 3: Open the water mains system tap
16 / 44 190052
Installation and operation
EN
5.2 Operation
Important indications
• Fill the water tank solely with fresh potable water.
• Never fill the water tank with warm/hot water, milk nor any other liquid.
• Never fill the coffee container (ground coffee container) any instant coffee,
cocoa nor any other powder mixtures. The appliance might get damaged.
• Never fill the coffee container with specially prepared coffee beans (e.g. coated
with cocoa or sugar), as this might cause damage to the appliance.
• The coffee container may be filled only with roasted coffee beans. Rice, soy
beans, cocoa beans, nuts, sugar, spices, etc., are prohibited.
• Always store coffee beans in dry, shaded place. Humid beans may damage the
grinder.
• Do not keep coffee beans in the coffee container if the appliance is not to be
used for a longer period of time. Coffee beans may attract humidity and clog the
grinder.
Preparation of the appliance
1. Before use, clean the appliance, observing instructions in section 'Cleaning'.
2. To safely start up the appliance, read the following indications carefully.
3. Fill the water tank with fresh drinking water.
4. Mind the filling level. It may not exceed the MAX marking.
5. Fill the coffee container with coffee beans.
190052 17 / 44
Installation and operation
EN
2. Then, select the program setting menu.
3. Use the '∧' and '∨' setting buttons, and
keep them pressing to select from
amongst various setting options:
– maintenance settings;
– beverage settings;
– appliance settings, etc.
4. To save a setting, press 'MENU / OK'
button.
5. Then, press the 'Back' button, to leave
the menu.
Appliance start-up
1. Plug the appliance into a suitable single socket.
2. Set the mains switch at the back of the appliance to 'I'.
3. Press the ON/OFF switch at the left side of the control panel to activate the
appliance.
With first use, the coffee machine performs an auto-test and cleaning. This helps
the appliance to achieve better working conditions. This process cannot be omitted.
WARNING! Risk of burns!
During the cleaning process, hot water flows from the coffee outlet onto
the drip tray.
Avoid contact with the outflowing hot water.
4. Prior the next operation, make sure the appliance is in the 'Ready' mode.
Program setting
1. Make sure the 'Ready' message is shown on the display, and then press and
hold the 'MENU / OK' button for 3 seconds.
18 / 44 190052
Installation and operation
EN
3. In the program menu, use '∧' and '∨'
setting buttons, and keep pressing
them to select 'Machine' option and
use 'MENU / OK' button to confirm
the selection.
4. Use '∧' and '∨' setting buttons, and
keep pressing them to select
'Language' option and use 'MENU /
OK' button to confirm the selection.
5. Now, use '∧' and '∨' setting buttons,
and keep pressing them to select
the language and use 'MENU / OK'
button to confirm the selection.
6. Then, press the 'Back' button, to
leave the menu.
The appliances switches to the 'Ready'
mode.
Language setting
1. If needed, set the language.
2. Press and hold the 'Menu / OK' button for 3 seconds to move to the program
menu.
190052 19 / 44
EN
Water hardness setting
1. Press the 'MENU / OK' button and
hold it for 3 seconds, and with the
'∧ ' and '∨ ' setting buttons select the
'Machine' option. Confirm the
selection with 'MENU / OK' button.
2. Use '∧' and '∨' setting buttons, and
keep pressing them to select 'Water
hardness' option and use 'MENU /
OK' button to confirm the selection.
3. Now, use '∧' and '∨' setting buttons,
and keep pressing them to select
the water hardness level in the local
water mains system and use 'MENU
/ OK' button to confirm the selection.
4. Then, press the 'Back' button, to
leave the menu.
Installation and operation
, beverage settings, appliance settings, et c., select from amongst various setting o ptions by pressing the '∧' and '∨ ' setting buttons.
Grinding coarseness setting
1. The coarseness of the ground coffee must be adapted to the selected coffee
beans.
NOTE: The grinding coarseness may only be set when the appliance is not
preparing any beverages.
2. Open the grinder cover. It is found before the coffee container.
Use the adjustment knob to set the selected grinding coarseness from 'fine'
(grinding level 1) to 'coarse' (grinding level 5). The grinder is factory-set to level 3.
20 / 44 190052
Installation and operation
EN
3. If during preparation the coffee flows very
slowly or does not flow out completely,
set the grinding coarseness to 4 or 5.
4. If the ground coffee is dark, we recommend higher coarseness settings: 4 or 5.
The changes to the grinding coarseness will
only be noticeable after 2 or more fresh cups
of coffee are brewed.
1. Select the beverage by pressing the button
with the required symbol.
2. Us the '∧' and '∨' setting buttons to select
subsequent options, e.g. amount per cup,
etc.
This setting is not stored.
3. Press the 'Back' button, to interrupt the
beverage preparation.
Preparing beverages
The appliance may still contain coffee ground during factory testing, hence the first
2–3 cups after start-up should not be drunk.
190052 21 / 44
Installation and operation
EN
1. Press the 'MENU / OK' button and hold it
for 3 seconds, and with the '∧' and '∨'
setting buttons select the 'Beverage'
option.
2. Confirm the selection with 'MENU / OK'
button.
3. Then, using the '∧' and '∨' setting buttons,
select 'Parameter'.
4. Confirm the selection with 'MENU / OK'
button.
The following beverage parameters may be
set or changed:
– Coffee strength
– Coffee amount
– Coffee temperature
– Pre-brewing
– Hot water volume
– Hot water temperature
– Milk time in seconds
– Cream time in seconds
– Simultaneously poured coffee +
milk / frothed milk
5. Change the required parameters and
confirm with the 'MENU / OK' button.
Appliance parameters settings
22 / 44 190052
Installation and operation
EN
1. Connect firmly the milk hose with the milk
frother and the milk container.
2. Place a cup under the coffee outlet and
press, for example, the 'CAPPUCCINO'
symbol to prepare the selected beverage.
When the 'Beverage ready' message is
displayed, it means that cappuccino is ready.
1. Press the '∧' setting button to select one of
the options: 'Multi Cups', 'Hot milk/cream'.
2. Using the '∧' and '∨' setting buttons, select
the number of cups.
3. Select the type of the beverage: 'Milk' or
'Cream'.
When the beverage is ready, the 'Beverage
ready' message is shown on the display.
Finally, the 'Ready' message appears at the
display.
The milk temperature for coffee beverages with
milk may be adjusted with the use of milk hose,
by increasing or decreasing the flow rate.
1. Depending on the required milk
temperature, set the knob on the milk hose
by turning it between L (low) and H (high)
position.
1. Depending on the required milk temper ature, set the knob on the milk hose b y turning it between L (low) and H (high) position.
Preparation of Cappuccino / Coffee Latte / Macchiato
Multi cups / milk / cream
Milk temperature control
190052 23 / 44
Installation and operation
EN
1. Press the '∨' setting button on the
control panel as long as the 'Use
powder' message appears on the
display.
2. Confirm the selection with 'MENU /
OK' button.
3. Open the grinder cover.
4. Fill the basin with the required
amount of coarsely ground coffee.
5. Then press the 'MENU / OK' button.
The display shows the 'Select coffee'
message.
Preparing beverages with ground coffee function
The coffee machine is equipped with a function that makes it possible to prepare
coffee with the use of ground coffee.
NOTE:
To prepare coffee with the ground coffee function, the amount of the
ground coffee used must be 5 - 14 g. Additionally, the coffee must be
coarsely ground to avoid clogging of the brewing unit.
24 / 44 190052
Cleaning and Descaling
EN
6. Select the beverage by pressing the
button with the required symbol.
6 Cleaning and Descaling
6.1 Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
As a rule, continuous hygiene in everyday work may be guaranteed only when the
appliance is cleaned daily.
We recommend performing complete cleaning after approx. 180 brewing process or
after 80 rinsing cycles. Also, the dregs container and the drip tray should be
cleaned regularly.
Both rinsing functions specified below are used for fast superficial cleaning of the
appliance, lasting 30 seconds. For thorough cleaning, we recommend using
cleaning programs that are available in 'Maintenance' menu.
190052 25 / 44
Cleaning and Descaling
EN
1. Press and hold the 'MENU / OK'
button for 3 seconds.
2. Use '∧' and '∨' setting buttons, and
keep pressing them to select 'Rinse
brew unit' option and use 'MENU /
OK' button to confirm the selection.
The rinsing of the brewing unit lasts for
approx. 30 seconds.
1. Use '∧' and '∨' setting buttons, and
keep pressing them to select 'Rinse
milk system' option and use 'MENU /
OK' button to confirm the selection.
The rinsing of the milk system lasts for
approx. 30 seconds.
Rinsing of the brewing unit
Rinsing of the milk system
26 / 44 190052
Cleaning and Descaling
EN
1. Press and hold the 'Menu / OK'
button for 3 seconds to move to the
program menu. Use '∧' and '∨'
setting buttons, and keep pressing
them to select 'Maintenance' option
and use 'MENU / OK' button to
confirm the selection.
2. Use '∧' and '∨' setting buttons, and
keep pressing them to select 'Brew
unit' option and use 'MENU / OK'
button to confirm the selection.
Right after pressing of the 'Brew unit'
option, there is information displayed.
3. Press the 'MENU / OK' button to
start cleaning.
4. Remove the drip tray and empty it.
Cleaning the brewing unit
After a longer period of use, some ground coffee will build up in the brewing unit.
Remove the remaining ground coffee, cleaning the brewing unit thoroughly. Use the
right cleaning tablets to clean the brewing unit. The cleaning process of the brewing
unit lasts approx. 20 minutes.
190052 27 / 44
Cleaning and Descaling
EN
5. Reinsert the drip tray in the
appliance.
6. Press the 'MENU / OK' button to
continue.
The 'Pre-cleaning' message will appear
on the display.
7. Open the grinder cover and insert
cleaning tablets.
8. Close the cover and press 'MENU /
OK' button to confirm.
When the brewing unit cleaning process
is finished, the appliance switches to
the 'Ready' mode.
28 / 44 190052
Cleaning and Descaling
EN
The brewing unit cleaning process is
executed.
9. Remove the drip tray and empty it.
10. Reinsert the drip tray in the
appliance.
The brewing unit cleaning process is
finished.
The appliance is re-heated.
When the brewing unit cleaning process
is finished and the appliance is reheated, it switches to the 'Ready' mode.
190052 29 / 44
Cleaning and Descaling
EN
3. Press and hold the 'Menu / OK'
button for 3 seconds to move to the
program menu.
4. Use '∧' and '∨' setting buttons, and
keep pressing them to select
'Maintenance' option and use
'MENU / OK' button to confirm the
selection.
5. Use '∧' and '∨' setting buttons, and
keep pressing them to select 'Clean
milk system' option and use 'MENU /
OK' button to confirm the selection.
The display will show the above
information.
6. Press the 'MENU / OK' button to
start the milk system cleaning.
7. Press again the 'MENU / OK' button
to continue cleaning.
Cleaning the milk system
1. In a separate container, prepare a solution of water and commercially available
cleaning agent for milk systems/milk frothers. Observe indications on the
packaging of the agent.
2. Remove the milk hose from the water container or from the milk hose opening in
the drip grate and introduce it to the container with milk system cleaning agent
solution.
30 / 44 190052
Cleaning and Descaling
EN
8. The milk system cleaning is
executed.
9. Fill the container with fresh potable
water and press the 'MENU / OK'
button to continue rinsing.
The milk system is rinsed.
The milk system cleaning is finished.
10. Remove the milk hose from the
rinse water container and introduce
it into the opening in the drip grate.
When the milk system cleaning process
is finished, the appliance switches to
the 'Ready' mode.
190052 31 / 44
EN
1. The milk frother should be cleaned
daily.
2. Press it simultaneously at both
sides and carefully remove from the
appliance.
3. Remove the milk hose from the milk
frother.
4. Disassemble the milk frother as
indicated in the picture above.
5. Components of the milk frother
should be washed under warm
running water.
Cleaning the milk frother
Cleaning and Descaling
32 / 44 190052
Cleaning and Descaling
EN
6. Wash the milk hose carefully under
running water, allowing water to run
also through the milk hose.
7. Reassemble the milk frother and
reinstall it in the appliance.
8. Secure the milk hose on the milk
frother.
After a longer period of use, the residues of
ground coffee may remain in the metal filter of
the brewing unit. They should be removed
regularly.
If these residues are not removed on time,
this may lead to build up of too high a
pressure.
Cleaning the metal filter
NOTE:
In order to secure full cleaning, we recommend to clean the metal filter,
when all other cleaning processes are executed.
1. Switch the appliance off and disconnect it from the power supply.
NOTE:
Remove the drip tray and the dregs container from the appliance.
190052 33 / 44
Cleaning and Descaling
EN
After preparation of 35 cups of coffee, the display will show the 'Empty the dregs
container' message.
1. Remove the drip tray.
2. The dregs container may be removed for cleaning as shown in the picture to
the right.
3. Empty the dregs container and the drip tray.
4. Wash both containers with warm water and reinsert them in the appliance.
When the drip tray is full, the display shows the 'Drip tray full' and 'Empty the drip
tray' messages.
7. Remove the drip tray and empty it.
8. Wash the drip tray and drip grate with warm water.
9. Reinstall the removed elements after cleaning.
2. Clean the metal filter manually, using a soft cloth or a soft brush and inserting it
carefully through the front opening.
3. When the filter is clean, reinsert the drip tray and the dregs container into the
appliance.
4. Restart the appliance, observing indications in 'Starting the Appliance' sections.
Cleaning the drip tray and the dregs container
• Do not use chemical solutions neither caustic cleaning agents nor alcohol to
clean the dregs container and the drip tray.
• Do not use any metal objects to remove soilings or dregs, to avoid damaging the
dregs container and the drip tray.
• If the need to clean the dregs container arises, the cleaning process must be
executed, as otherwise the appliance may be damaged.
• Proceed the following way during cleaning:
34 / 44 190052
Cleaning and Descaling
EN
1. Remove the water tank.
2. Wash the water tank thoroughly each
time it is filled with water.
3. Then, fill the water tank with fresh
potable water and reinstall it in the
appliance.
4. The water tank should always be
removed very carefully; never let it fall.
Should the water tank get damaged, it
must be replaced immediately.
1. Remove the coffee container cover
carefully.
2. Always clean the coffee container
with a dry cloth or a paper towel.
3. Reinsert the cover.
4. Never allow the coffee container cover
to fall. Should the cover get damaged, it
must be replaced.
Cleaning the water tank
Cleaning the Coffee Container
190052 35 / 44
Cleaning and Descaling
EN
If after a certain period of time, a certain
level of deposits is reached, the display
will start showing, alternately, the
following messages: 'Run descale' or
'Press rinse'.
4. In the program menu, select
'Maintenance'.
5. Select the 'Descale' option and
confirm with 'MENU / OK' button.
6. Press the 'MENU / OK' button again
to commence descaling.
6.3 Descaling
In the course of daily use of the appliance, depending on the local water hardness,
limescale may build up inside the appliance components. In order to maintain the
appliance in top condition, and in order to be certain that every brewing process
yields the best results, the appliance should be descaled from time to time.
1. Use only appropriate tablets for coffee machines for cleaning and descaling.
2. During descaling, always strictly observe manufacturer's indications concerning
safety, found on the package of the agent.
WARNING!
If, accidentally, the descaling agent comes into contact with eyes or skin,
rinse them immediately with fresh water.
3. Always execute the descaling process in full; interrupting it may cause damage
to the appliance.
The entire descaling process lasts approx. 40 minutes.
36 / 44 190052
Cleaning and Descaling
EN
7. Remove the drip tray and empty it.
8. Reinsert the drip tray in the
appliance.
9. Remove the milk hose from the drip
grate. Press the 'MENU / OK' button
to commence descaling.
10. Dissolve the descaling agent
completely in 1,000 ml of clean
water, pour the solution in the water
tank and reinstall the water tank.
The descaling is executed.
11. Remove the drip tray and empty it.
190052 37 / 44
Cleaning and Descaling
EN
12. Reinsert the drip tray in the
appliance.
13. Remove the water tank and clean it
thoroughly.
14. Fill the water tank with fresh potable
water and reinstall it in the
appliance.
15. Press the 'MENU / OK' button to
continue descaling.
The descaling is continued.
The descaling is finished.
The appliances switches to the 'Ready'
mode.
38 / 44 190052
Cleaning and Descaling
EN
3. Press and hold the 'MENU / OK'
button for 3 seconds.
4. Use '∧' and '∨' setting buttons, and
keep pressing them to select
'Machine' option and use 'MENU /
OK' button to confirm the selection.
5. Use '∧' and '∨' setting buttons, and
keep pressing them to select
'Factory reset' option and use
'MENU / OK' button to confirm the
selection.
6. Use '∧' and '∨' setting buttons, and
keep pressing them to select 'Empty
the system' option and use 'MENU /
OK' button to confirm the selection.
7. Close the mains water system
supply (close the water tap) or
remove the water tank from the unit.
• When empt ying the water supply hose, hot water ma y flow from the coffee outlet onto the dri p tray. Avoid contact with the outflowi ng hot water; there is the risk of scaldi ng.
Transporting the appliance
1. Keep the packaging of the coffee machine for subsequent transportation.
2. Make sure the water is removed from the appliance before transporting it to
prevent damage to the appliance.
WARNING! Risk of burns!
When emptying the water supply hose, hot water may flow from the coffee
outlet onto the drip tray.
Avoid contact with the outflowing hot water.
190052 39 / 44
Cleaning and Descaling
EN
8. Press the 'MENU / OK' button.
The water system is emptied.
Then, the appliance begins automatically to clean the water supply hose. After the
water system is emptied, the appliance switches off automatically.
9. After it switches off, remove the drip tray, and then empty and clean it.
10. After the water supply hose is cleaned, wipe the appliance carefully.
11. When re-starting the appliance, perform all the steps described in sections
'Preparation of the appliance' and 'Starting the appliance'.
40 / 44 190052
Possible Malfunctions
EN
Display Message
Cause
Solution
Empty the drip tray
The drip tray is full, and the
beverage preparation
functions are not operating
Remove the drip tray, empty
it and reinstall it in the
appliance
Empty the dregs
container
The dregs container is full,
and the beverage
preparation functions are
not operating
Remove the dregs
container, empty it and
reinstall it in the appliance
Fill the water tank
The water tank is empty,
and the beverage
preparation functions are
not operating
Fill the tank with fresh
potable water
Fill with coffee
beans
The coffee container is
empty, and the beverage
preparation functions are
not operating
Fill the coffee container with
coffee beans
Install the drip tray
The drip tray is removed,
and the beverage
preparation functions are
not operating
Install the drip tray in the
appliance correctly
System empty
Not enough water in the
appliance water supply
hose, and the beverage
preparation functions are
not operating
Press the 'OK' button, to
confirm
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
190052 41 / 44
EN
Display Message
Cause
Solution
Error codes 1–7
Errors cannot be defined
Switch the appliance off and
switch it back on
If the problem persists, pull
the plug out and contact the
service company
High pressure
The used coffee beans are
too dark or the coffee is
ground too finely
Set the coarser grinding
level of 4–5 or use a
coarsely ground coffee
Brewing unit filter clogged
Run the cleaning program
for the brewing unit
Brewing unit error
Internal component error
Restart the appliance
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
8 Disposal
Electrical Appliance
Disposal
Electrical appliances should be returned to designated collection points.
42 / 44 190052
Loading...