Read this instruction manual before using and keep it available
at all times!
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
Diese Bedienungsanleitung beschreibt di e Installation, Bedienung und Wartung d es Geräts und gilt als wichtige Infor mationsquelle und Nachschlagewer k. Die Kenntnis aller enthaltenen Sicherh eitshinweise und Handlungsanweisunge n schafft die Voraussetzung für das sichere und sachgerechte Ar beiten mit dem Gerät. Darüber hinaus müssen die für den Einsatzbereich des Geräts geltenden örtlichen Unfall verhütungsvorschriften und allgemeine n Sicherheitsbestimmungen eingehalt en werden. Diese Bedienungsanleitung is t Bestandteil des Produkts und muss in unmittelbarer Nähe des Ger äts für das In¬stallations-, Bedienu ngs-, Wartungs- und Reinigungspers onal jederzeit zugänglich auf¬bewahrt w erden. Wenn das Gerät an eine dritt e Person
weitergegeben wird, muss die Bedienungsa nleitung mit ausgehändigt werden.
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
2 / 24 700806
Safety
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
, die
1.2Safety instructions
Electrical Current
• Too high a mains voltage or incorrect installation may cause electric shock.
• The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
• To avoid short-circuit, the appliance should be kept dry.
• If there are malfunctions during operation, disconnect the appliance from the
power supply.
• Do not touch the appliance’s plug with wet hands.
• Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
• Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
• Do not transport the appliance, holding it by the power cord.
• Do not allow the power cord to come into contact with heat sources or sharp
edges.
• Do not bend, pinch nor knot the power cord.
700806 3 / 24
Safety
EN
• Always completely unwind the power cord.
• Never place the appliance or other objects on the power cord.
• Always take hold of the plug to disconnect the appliance from the power supply.
• Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Incorrect operation of the appliance ma y cause fire or explosion hazard due to igniti on of its content.
Fire hazard / flammable materials hazard / explosion hazard!
• Do not use any electric devices in the appliance.
• Do not store nor use petrol or other flammable liquids and gases in the vicinity of
this or any other appliance. Those gases may cause fire or explosion hazard.
• Do not put into the appliance any explosive materials, like sprays filled with
flammable propellants. Contents of containers filled with flammable gases and
liquids may leak in low temperatures, and the contents may catch fire from
sparks generated by an electric appliance. Explosion hazard!
• In the case of coolant leakage, pull the plug from the socket. Remove all
sources of ignition in the vicinity, ventilate room and contact technical service.
Avoid coolant getting in contact with eyes, as it may cause serious eye damage.
• Never use any flammable liquids for cleaning the appliance or its parts. Gases
released may cause fire or explosion hazard.
• In the case of fire, disconnect the appliance from the power supply before
attempting adequate fire-extinguishing actions.
• Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
• Defrosting process may not be sped up with mechanical means or heat energy
sources (candles or heaters) nor with any other means. Vapour produced may
cause short-circuit and too high temperatures may damage the appliance.
• All ventilation slots should not be obstructed during operation.
• Never attempt to damage cooling installation of the appliance.
Operating personnel
• This appliance is not intended to be used by persons (including children) with
limited physical, sensory or mental capabilities, nor by persons with limited
experience and/or limited knowledge.
• Children should be supervised to ensure that they are not playing with or
switching the appliance on.
Improper Use
4 / 24 700806
Safety
EN
• Unintended or prohibited use may cause damage to the appliance.
• The appliance may only be used when its technical condition is flawless and
allows for safe operation.
• The appliance may only be used when all connections are executed according
to rules of law in force.
• The appliance may only be used when it is clean.
• Use only original spare parts. Never attempt to repair the appliance on your own.
• Do not introduce any changes in the appliance nor modify it.
• Do not drill hole in the appliance nor install any objects on it.
• Do not place any heavy objects on the appliance.
700806 5 / 24
Safety
EN
1.3Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
– Cooling of bottled and canned beverages.
The appliance is intended for operation in maximum ambient temperature of
38°C.
1.4Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
The following is an unintended use:
– Storing flammable or explosive objects and liquids, such as ether,
petroleum or adhesives;
– Storing explosive materials, like sprays filled with flammable propellants;
– Storing pharmaceutical products or preserved blood;
– Storing live pets.
6 / 24 700806
General information
EN
2 General information
2.1Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
The warranty period for this appliance is 24 months, counted from the purchase
date.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.
700806 7 / 24
Transport, Packaging and Storage
EN
3 Transport, Packaging and Storage
3.1Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.
8 / 24 700806
Technical Data
EN
Name:
Impulse cooler 60L-1F
Art. No.:
700806
Material:
stainless steel, plexiglas, plastic
Display area material:
stainless steel
Display area dimensions (W x D), in mm:
600 x 340
Number of partitions:
1
Usable inner height:
450
Volume, in l:
60
Temperature range, min.–max., in °C:
2 - 8
Temperature control levels:
8
Coolant, amount in kg:
R290 / 0,060
Climate class:
ST
Swivel castors:
-
Connected load:
0,175 kW | 220-240 V | 50/60 Hz
Dimensions (W x D x H), in mm:
690 x 450 x 1010
Weight, in kg:
39,0
4 Technical Data
4.1Technical Specifications
We reserve the right to implement technical modifications.
700806 9 / 24
Technical Data
EN
Name:
Impulse cooler 110L-2F
Art. No.:
700809
Material:
stainless steel, plexiglas, plastic
Display area material:
stainless steel
Display area dimensions (W x D), in mm:
600 x 340
Number of partitions:
2
Usable inner height:
350
Volume, in l:
110
Temperature range, min.–max., in °C:
2 - 8
Temperature control levels:
8
Coolant, amount in kg:
R290 / 0,065
Climate class:
ST
Swivel castors:
4 swivel casters, 2 with brake
Connected load:
0,185 kW | 220-240 V | 50/60 Hz
Dimensions (W x D x H), in mm:
547 x 753 x 1010
Weight, in kg:
43,0
We reserve the right to implement technical modifications.
10 / 24 700806
Technical Data
EN
Version / Characteristics
• Cooling:
– circulating air
– compressor
• Thermostat
• Control: rotary control knob
• Digital display
• Indicator lights:
– ON/OFF
– Lighting
• Automatic defrost function
• Evaporation of condensed water
• Internal LED lighting
• Special features:
– view of chilled products from 3 sides (700806)
– all-round view of chilled products (700809)
– small footprint
4.2 Functions of the Appliance
The impulse cooler is perfect for goods distribution areas at petrol stations, in
supermarkets, kiosks or DIY stores. Suitable bottles and cans with beverages are
introduced into the cooler from the top, and then they are chilled at the set
temperature through the required period of time. Cooling with circulating air
provides for even distribution of chilled air inside the appliance. The temperature
range is 2–8°C.
700806 11 / 24
Technical Data
EN
Fig. 1
1. Temperature indicator
2. Hinged lid
3. Internal LED lighting
4. Internal ventilation openings
5. Rounded plexiglass pane
6. Display area
7. Housing
8. Feet (3 pcs)
9. Ventilation openings
10. Back wall
11. Control elements
4.3List of Components of the Appliance
700806
12 / 24 700806
Technical Data
EN
Fig. 2
1. Hinged lid (2 pcs)
2. Internal LED lighting
3. Partition — plexiglass wall
4. Internal ventilation openings
5. Display area (2 pcs)
6. Rounded plexiglass pane
7. Swivel castors, 4 pcs, 2 with brakes
8. Housing
9. Ventilation openings
10. Control elements
700809
700806 13 / 24
Installation and operation
EN
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
5 Installation and operation
5.1Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
• Never place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Nie należy umieszczać urządzenia w gorąc ym otoczeniu a ni w pobliżu m ateriałów łat wopalnych.
• The appliance requires sufficient airflow f or proper operation. Assure a minimu m lateral clearance of the appliance of 10 c m.
• Die Öffnungen am Gerät niemals abdec ken oder blockieren.
• In order to avoid damage to the compressor, do not tilt the appliance more than
45° when positioning or transporting it.
• The electric socket should be easil y accessible so it is possible to quickly discon nect the power cord when necessar y. The electric socket should be easil y accessible so it is possible to quickly disco nnect the power cord when necessar y. The electric socket should be easily accessi ble so it is possible to quickly discon nect the power cord when necessar y.
• Nie należy umieszczać urządzenia w gorąc ym otoczeniu a ni w pobliżu m ateriałów łat wopalnych.
• The appliance requires sufficient airflow f or proper operation. Assure a minimu m lateral clearance of the appliance of 10 cm.
• Die Öffnungen am Gerät niemals abdec ken oder blockieren.
• Do not place the appliance in direct sunlight or in the vicinity of heat sources
(cooker, radiator, heating devices, etc.). Heat sources may negatively affect
power consumption, and restrict functions of the appliance, too.
• The electric socket should be easil y accessible so it is possible to quickly discon nect the power cord when necessar y. The electric socket should be easil y accessible so it is possible to quickly disco nnect the power cord when necessar y. The electric socket should be easily accessi ble so it is possible to quickly discon nect the power cord when necessar y.
• Do not block nor cover the ventilation openings nor air inlet or air outlet of the
appliance.
• Nie należy umieszczać urządzenia w gorąc ym otoczeniu a ni w pobliżu m ateriałów łat wopalnych.
• The appliance requires sufficient airflow f or proper operation. Assure a minim um lateral clearance of the appliance of 1 0 cm.
• Die Öffnungen am Gerät niemals abdec ken oder blockieren.
• Place the appliance so that sufficient air circulation is ensured. Do not block nor
cover ventilation openings in the rear wall of the appliance.
14 / 24 700806
Installation and operation
EN
• Leave at least 10 cm clearance from walls and other objects.
• Lock the swivel castors with the parking brake when the 700809 appliance is set
in a suitable location.
• Compensate for smaller unevennesses of flooring in the place of installation of
700806 appliance through screwing in and out of the height-adjustable feet.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Prior to first use, the appliance should be installed and left standing upright for at
least 2 hours, before it is connected to power supply.
• After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
5.2 Operation
• Prior to first operation, clean the appliance and its equipment, observing instructi ons in section 6 'Cleaning'. Make sure no water enters electric installatio n and connection box. Then thoroughl y dry the appliance and the entire eq uipment.
• Insert the bottom cover into the appliance. The cover acts as a spacer between t he heating element and left-over f ood tray.
• Carefully insert the connection box with th e heating element at the back edge of t he appliance. A pin in bottom par t of the connection box must enter a hole in the main appliance. This way the connection box is properly mounted.
Tips for the User
• Beverages in bottles or cans should be arranged on the display area so that
proper distances between them allow for sufficient air circulation inside the
appliance. Insufficient distances hinder the cooling effect.
• To limit the loss of cold air, minimize the opening time of hinged lid during
operation.
• If possible, in the event of a sudden power failure, avoid opening the lid of the
appliance in order to avoid loss of cool air.
700806 15 / 24
Installation and operation
EN
A
LED cooling indicator
B
Digital display
C
Temperature control
D
ON/OFF button
E
LED temperature level indicator
F
LED lighting ON/OFF switch
Fig. 3
Preparation of Appliance
1. Before the first use, clean the appliance thoroughly according to the instructions
included in section 6. 'Cleaning'.
2. Then dry the appliance well.
3. Close the appliance lid(s).
4. After cleaning and prior to connecting the appliance for power, wait for approx.
30 min.
Control Elements
Messages
1. The LED cooling indicator: this LED indicator is lit during cooling and blinks
during delay.
2. The LED temperature level indicator: when the temperature level is set,
appropriate LED indicator is lit.
16 / 24 700806
Installation and operation
EN
Appliance Start-Up / Setting
1. Plug the appliance into a suitable single socket.
2. Press and hold the ON/OFF button in the middle of the temperature controller
for at least 3 seconds to switch the appliance on.
The measured internal temperature will be shown in the digital display. The
appliance starts up with a delay.
In the case of the 700806 appliance, the inner temperature is displayed in the
temperature display at the back of the appliance (1, Fig. 1).
3. Rotate the temperature controller clockwise or counter-clockwise, until the
required temperature level is reached (1–8).
4. Press the ON/OFF button once to save the setting.
The LED temperature level indicator lights up in red with the right temperature level
setting.
The inner temperature is displayed in the digital display (temperature display).
If the ON/OFF button is not pressed, the inner temperature is displayed after 6
seconds.
NOTE!
Temperature level settings 1–8 do not represent the actual temperature
inside the appliance.
The inner temperature is higher, when the digit is lower.
The inner temperature is lower, when the digit is higher.
5. Beverages in bottles or cans should be placed in the appliance only when it
reaches the required temperature.
ATTENTION!
The appliance features cooling with circulating air, which is provided by
ventilation openings in the display area (and partition).
During filling, in order not to deteriorate the cooling effect, pay attention not to
obstruct nor block the ventilation openings.
6. If needed, the temperature may be altered with temperature controller.
700806 17 / 24
Cleaning and Maintenance
EN
Switching the LED Lighting On/Off
1. If needed, switch the LED lighting on, using the right ON/OFF switch, and
setting it to 'I' position.
A red mains control light in the switch will light up.
2. In order to switch the lighting on, set the LED lighting ON/OFF switch to 'O'
position.
Switching the Appliance Off
1. If the appliance is not to be used any more or is to be cleaned, press and hold
the ON/OFF button in the middle of the temperature controller pressed for at
least 3 seconds.
The appliance is being switched off.
The digital display shows '—'.
2. After use, disconnect the appliance from the mains power supply (pull the plug
out).
6 Cleaning and Maintenance
6.1Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
18 / 24 700806
Cleaning and Maintenance
EN
6.2Cleaning
1. Wash the appliance regularly.
2. Remove all objects from the appliance.
3. Clean the display area, plexiglass partition, plexiglass pane from the inside, as
well as hinged lid(s) with a soft, damp cloth. Use a mild cleaning agent if
required.
4. Clean the plexiglass pane and housing from the outside with a soft, damp cloth.
5. Wipe cleaned surfaces with a cloth moistened in fresh water.
6. Finally, thoroughly dry all cleaned surfaces with a soft cloth.
7. Leave the lid(s) open for the appliance to dry completely.
6.3 Maintenance
Let the appliance to be inspected by professional technician at least once a year or
as required.
700806 19 / 24
Possible Malfunctions
EN
Problem
Possible Cause
Solution
No cooling
The plug is not properly
connected to the socket
Check the plug and insert it
properly in a socket
Electric power supply safety
fuse damaged
Check the fuse, connect
the appliance to another
socket
No power supply
Check the electric power
supply
Insufficient cooling
efficiency
Direct sunlight or heat
sources in immediate vicinity
Move the appliance away
from heat sources
Poor air circulation around
the appliance
Keep sufficient clearance
from walls or other objects
Ventilation openings
obstructed or blocked
Keep ventilation openings
free
Hinged lid is not closed
entirely, opened too
frequently or its opening
times period are too long
Close the hinged lid tightly;
limit the lid opening times
to minimum
Too little clearance between
objects inside the appliance
or too many objects in the
appliance
Provide for sufficient
clearance between objects
inside the appliance;
remove the excess of
objects
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
20 / 24 700806
Possible Malfunctions
EN
Problem
Possible Cause
Solution
Compressor
operates too long
At the first start-up
This is normal and is not a
malfunction
Ambient temperature in
summer is too high
This is normal and is not a
malfunction
The following phenomena are not malfunctions:
– During normal operation, a sound of water flowing is heard. This is a
sound of coolant flowing through the installation.
– Water vapour condensation on plexiglass panes in high air humidity
conditions is a normal occurrence. Wipe the water vapour out with a soft,
dry cloth.
700806 21 / 24
Disposal
EN
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
8 Disposal
Electrical Appliance
Electrical appliances should be returned to designated collection points.
Coolant
The propellant used in the appliance is flammable. It should be utilised pursuant to
national regulations in force.
22 / 24 700806
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.