Original
-
Gebrauchsanleitung
„MINI“
A165110
A165112
V8/0616
GB/UK
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 20
1.1 Safety instructions ................................................................................................ 20
1.2 Key to symbols ..................................................................................................... 23
1.3 Proper use ............................................................................................................ 24
2. General information ................................................................................................ 25
2.1 Liability and Warrantees ....................................................................................... 25
2.2 Copyright protection ............................................................................................. 25
2.3 Declaration of conformity ...................................................................................... 25
3. Transport, packaging and storage......................................................................... 26
3.1 Delivery check ...................................................................................................... 26
3.2 Packaging ............................................................................................................. 26
3.3 Storage ................................................................................................................. 26
4. Technical data ......................................................................................................... 27
4.1 Technical specification ......................................................................................... 27
4.2 Overview of parts ................................................................................................. 28
5. Installation and operation ....................................................................................... 30
5.1 Installation ............................................................................................................ 30
5.2 Operation .............................................................................................................. 31
6. Cleaning ................................................................................................................... 34
7. Possible Malfunctions ............................................................................................ 35
8. Waste disposal ........................................................................................................ 36
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
- 19 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions
in this instruction manual.
1.1 Safety instructions
•
The device is not intended for use by individuals (including children)
with physical or mental disabilities, insufficient experience, and/or
insufficient knowledge unless such persons are under the care of a
person responsible for their safety or have received instructions
regarding appropriate use of the device.
•
Children should be observed to ensure that they are not playing with
the device.
•
Do not leave the device unattended during operation since there
might occur malfunctions which could result in overheating of the oil.
In case of high temperatures oil might ignite.
•
Never leave the device unattended when in use.
•
Only use the device indoors.
•
The device is not adapted for use with an external timer or remote
control.
- 20 -
This device may only be operated in technically proper and safe
•
condition.
•
Prevent access of children to the package materials like plastic
bags and foamed polystyrene elements. Suffocation hazard!
•
Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the device.
Do not attempt to repair the device yourself.
•
Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous for the
user or lead to damages of the device or personal injury, and further,
the warranty expires.
•
To prevent hazards and to ensure optimum efficiency, no modifications
or alterations to the device that are not explicitly approved by the
manufacturer may be undertaken.
DANGER! Electric shock hazard!
To avoid the hazard results please follow the safety instructions below.
•
Never allow the power cable to come into contact with heat sources or
sharp edges. The power cable should not hang over the side of the
working surface. Ensure that no one can step on or trip over the cable.
•
The power cable must not be folded, bent or tangled, and must always
remain fully unrolled. Never place the device or other objects on the
power cable.
•
Do not lay the cable over carpets or heat insulations. Do not cover
the cable. Keep away the cable from operating range and do not
dunk it into water.
•
Inspect the power cable regularly for damage. Never use the device
if the cable is damaged. If the power cable is damaged, have an
authorised service center or qualified electrician replace it.
- 21 -
The supply cable must be disconnected from the socket only by
•
pulling the plug.
•
Never carry or lift the device by the supply cable.
•
In any case do not open the device housing. In case of electrical or
mechanical modifications the electric shock hazard will occur.
•
Never immerse the appliance, the power cord and the power plug in
water or other liquids; do not put it under running water and clean any
parts of the appliance in the in the dishwasher.
•
Do not use any acid agents and make sure no water ingresses the
device.
•
Never operate the device with moist hands or standing on wet floor.
•
Remove the plug from its socket:
- when the device is not used,
- in case of anomalies during operation,
- before cleaning.
HOT SURFACE! Burn hazard!
To avoid the effects of this risk, follow the safety instructions presented
below.
•
During the operation the surface of the device is very hot!
To avoid burns to the hands and fingers, do not touch the hot
surface of the device! Operate the device only using the designated
handles and switches.
•
Also after switching off, the frying oil/fat remaining in the basin
remains hot for some time. Hot oil/fat splashes or explosions may
cause burns at hands, arms and face! Before cleaning or moving it to
another place oil must cool down first.
- 22 -
Do not use moisten frying goods. Always remove the extra ice from
•
deep frozen products first. Do not leave any frozen products in the
basket hanging over the chamber filled in with the hot oil/fat. Even the
smallest water drops may cause oil splashes or lead to explosions
during frying.
WARNING! Fire or explosion hazard!
Follow the safety instructions listed in order to avoid the hazard:
•
Never operate the device near combustible, easily flammable
materials (e.g. petrol, spirit, alcohol etc.). They evaporate through
heating and in case of contact with ignition sources deflagrations
can occur which can lead to serious personal injuries and property
damages.
•
Do not use the device near the inflammable objects or under them
(e.g. curtains, wall mounted cabinets etc.)
•
When a fire arises unplug the power cord from the socket before you
initiate appropriate measures for fire-fighting. Provide sufficient supply
of fresh air. Caution: Never extinguish the fire with water when the
power plug is connected to the socket. Electric shock hazard!
1.2 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.
- 23 -
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.3 Proper use
The operational safety of the device is assured only in case of proper use, according
to the operation manual.
All technical activities like installation and maintenance must be performed by the
qualified service personnel only.
The device intended for home use or in similar places such as:
→ in kitchens, for store or office employees or in other service locations;
→ in agricultural holdings;
→ by guests of hotels, motels and other typical places of accommodation;
→ in Bed & Breakfasts.
The deep fat fryer is designed for the frying of appropriate foods only.
You may not use the deep fat fryer for the following:
- Heating of foods and liquids (fluids).
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.
The operator is liable for all damages resulting from inappropriate use.
- 24 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
- violation of advice concerning operation and cleaning;
- use other than designed;
- alterations made by user;
- use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.
- 25 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service centre immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
- Do not store outdoors.
- Keep it dry and dust-free.
- Do not expose it to aggressive media.
- Do not expose it to direct sunlight.
- Avoid mechanical shocks and vibration.
- In case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly.
If required refresh or renew.
- 26 -
4. Technical data
4.1 Technical specification
Name
Model:
electric deep fryer*
Single
Double
electric deep fryer*1
„MINI II“ „MINI III“
Code-No.:
Material: housing and cover: stainless steel; fuse box: plastic
Power supply: 230 V 50 Hz
Power: 2200 W 2 x 2200 W
Number of oil chambers: 1 2
Capacity of oil chambers: 4 litres 2 x 4 litres
Number of baskets: 1 2
Oil temperature range: 60 °C - 190 °C
Dimensions: W 200 x D 400 x H 280 mm W 400 x D 400 x H 280 mm
Weight: 3.3 kg 6.5 kg
We reserve the right to make technical changes!
*
The device is not suitable for continuous commercial use
A165110 A165112
1
*
The device is not suitable for commercial use
- 27 -
2
6
4
5
4.2 Overview of parts
A165110
1
7
3
Fuse box with heating element
1
Basket
2
Housing
3
Handle (2)
4
Oil chamber
5
Control panel
6
Cover
7
- 28 -
5
4
1
2
3
A165112
6
6
1
2
3
Fuse box with heating element
1
Basket
2
Oil chamber
3
Housing
4
Handle (2)
5
Control panel
6
Cover
7
7
7
- 29 -
5. Installation and operation
5.1 Installation
Positioning
• Unpack the device and remove all packing material.
CAUTION!
Never remove the rating plate and any warning signs from the device.
• Place the device on top of an even, stable, dry and water-resistant surface which
supports the weight of the device and is not heat sensitive.
• Never place the device on the flammable surfaces.
• You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
• Never place the device at the edge of a table to avoid accidents.
• Never place the device in humid or wet environment.
• Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device (see
rating plate). Connect the device only in case of compliance!
Connect the device only to properly installed single socket
with protective terminal.
• The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
• Two separate sockets are required to connect the double deep fat fryer.
- 30 -
5.2 Operation
CAUTION!
The deep fat fryer can be serviced only be people who are familiar with
operation of the device and the risks occurring during frying.
Before use
• Remove the cover, then remove the basket, oil chamber and remaining equipment
from the device.
• Fix the handles to the fryer housing with use of supplied screws.
• Fix the basket handle by catching
it to the fixing shackles.
Fixing shackles
Basket handle
• Remove the fuse box from the device by raising it until a
„
click“ sound is heard.
• Grab the oil chamber with both hands and carefullyremove from the device.
• Wash the cover, oil chamber, basket and casing with a mild washing-up liquid.
Rinse in clean water and dry.
• Wipe the housing with moist soft cloth, taking care to ensure no water gets into the
fuse box and electrical systems.
Start-up
• Insert the oil chamber. Carefully mount the fuse box with heating element to the
rear of the device by carefully sliding it into the guides until a „click“ sound is
heard. This sound means the fuse box has been properly assembled.
Note: For safety reasons, the device only operates when the fuse box is properly
mounted to it, so that the micro fuses enable the device to function.
• Make sure that the device is turned off (set the temperature adjustment knob
in „O“ position).
• Before pouring oil into the oil chamber, check that there is no water inside.
The oil chamber must be clean and dry.
- 31 -
CAUTION!
Use only liquid oil for frying. Solid grease must be dissolved into liquid form
before frying!
• Carefully fill the oil chamber with frying oil until the required level is reached. The oil
level must always be between the „MIN“- and „MAX“ markings. If the level of oil is
above MAX, hot oil may spill out.
WARNING!
FIRE HAZARD! If the oil level is below MIN, there is an increased risk of
oil catching fire.
BURN HAZARD! If the level of oil is above MAX, hot oil may spill out.
• Never turn the device on without oil in the oil chamber.
WARNING! Burn hazard!
Do not reuse oil, as its lower combustion point means that it may catch fire.
Moreover old oil may easily foam. There is also an increased risk of smoke
and unpleasant odours occurring.
• Regularly change frying oil. After used oil has cooled, carefully pour it into a retention
tank and dispose of in accordance with environmental protection regulations.
Control panel
Temperature controller knob
Power control light (red)
- 32 -
Temperature setpoints
Heating control light (green)
Frying
• Connect the device to the single grounded socket.
• The red power control light will come on.
• Set the temperature dial by turning it clockwise to the desired temperature (60 °C –
190 °C). Follow the temperature suggestions located on the control panel.
• While heating up the green control light comes on, going off when the set temperature
has been reached. The deep fryer is equipped with the thermostat. When the oil
temperature drops the green light comes on again and the device heats again.
• For best results, wait until the device has reached the desired temperature and then
place the food product in to be fried.
• The basket is for frying small food products. It is equipped with folding handle
and hook.
• Slowly lower the basket into the oil and
start frying.
• After frying, carefully pick up the basket
Handle
Basket hook
and hand it on the hook at the front of the
oil chamber and allow the oil to drip.
Housing
WARNING! Burn hazard!
When in use, the device and oil in the oil chamber are very hot and
the oil is at risk of catching fire.
Do not allow the device to function for long periods of time!
When finished using the unit, turn the temperature dial counterclockwise
to the „O“position and remove the plug from its socket.
WARNING! Burn hazard!
Do not use the deep fryer with its cover on! The cover serves only as protection
against dust, and for keeping the oil hot between fryings. Prior to placing the
cover on, ensure that it is dry. If water gets into the oil chamber, this may cause
oil to splatter.
- 33 -
• If the deep fryer has been accidentally turned on with too
little or no oil in the oil chamber, it will automatically turn
itself off at approx. 230 °C, to protect against
overheating. If this occurs, disconnect the device by
removing its plug from the socket and leave it to cool.
• If the device has turned off to prevent overheating, it can be
turned back on after pressing the button marked RESET.
This button is located at the rear of the device and can be
pressed using a long, thin object such as a wire (see figure).
RESET button
• Cool the device to temperature below 170 °C and switch the RESET button up.
• Next, insert the plug into a socket and turn the device on.
6. Cleaning
WARNING!
Before cleaning disconnect it from the power supply (pull the
plug!) and wait until the device has cooled off.
The device is not suited for direct washing with water.
Therefore, do not use any kind of pressure water jet for cleaning
the device!
Make sure that no water gets into the device.
CAUTION!
Never use abrasive cleaning agents or scouring materials which may damage
the surface of the device.
o Clean the device regularly.
o The heater may be easily removed from the oil chamber by lifting and removing the
fuse box. Then the heater and the oil chamber may be easily cleaned.
CAUTION!
The control box (control panel) must not be wet cleaned or immersed in
water. Moisture must not get inside the device.
- 34 -
•
o When the oil is cold pour it carefully into the container. Ensure the container is
secure and stable.
o Control panel, surface of the device and power cord should be cleaned with a moist
cloth and a mild cleaning agent. Make sure that no moisture gets inside the control
box. This may lead to dangerous creeping current and interruptions in the operation
of the device.
o Before mounting, dry all the elements thoroughly! Reassemble the device.
o If the device is not used for any lengthy period, clean it according to the
aforementioned description and store it in dry, clean place protected against cold,
sun and children. To protect the device against dirt, cover or pack it. Do not place
any heavy objects on the device.
7. Possible Malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Problem Cause Solution
Device connected to
power source, red power
control light does not
come on, and the device
does not heat up.
Red power control light
comes on but temperature does not rise
althought the temperature is set.
Heating element does
not heat after a short
time.
• Plug improperly inserted
into socket
• Safety fuse disconnected
• Fuse box improperly
mounted
• Micro fuse contact
malfunction
• Damaged temperature
controller
• No contact with the heater
• Damaged heater
• Safety thermostat
activated
• Remove plug and insert
properly into socket
• Check fuse, connect
device to another socket
• Check that fuse box is
properly mounted
• Contact a sales agent
• Contact a sales agent
Press RESET button on
the back of the device
(see page 34)
- 35 -
If you cannot remove the malfunctions:
- do not open the body,
- notify the customer service point or contact the sales
agent, while providing the following information:
type of malfunction;
article and serial number (rating plate at the
rear of the device).
8. Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit
for use before disposal. For that purpose disconnect device from mains
supply and remove mains connection cable from the device.
CAUTION!
For the disposal of the device please consider and
act according to the national and local rules and
regulations.
Stale oil
Please remove used frying oil in accordance with all applicable
environmental protection regulations.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
- 36 -
Loading...