Bartscher 117261, 117201, D6110 Digital, D10110 Digital Digital Instruction Manual
117261 / D6110 Digital
117201 / D10110 Digital
V1/0414
GB/UK
ENGLISH
Translation
of the original instruction manual
Read these instructions before using and keep
them available at all times!
1. General information .............................................................................................. 41
1.1 Information about the instruction manual ........................................................... 41
1.2 Key to symbols ................................................................................................... 41
1.3 Liability and Warrantees .................................................................................... 42
1.4 Copyright protection ........................................................................................... 42
1.5 Declaration of conformity ................................................................................... 42
2. Safety ...................................................................................................................... 43
2.1 General information ........................................................................................... 43
2.2 Safety instructions for use of the device ............................................................ 43
2.3 Intended use ...................................................................................................... 44
3. Transport, packaging and storage ....................................................................... 45
3.1 Delivery check .................................................................................................... 45
3.2 Packaging .......................................................................................................... 45
3.3 Storage .............................................................................................................. 45
4. Technical data ........................................................................................................ 46
4.1 Overview of parts ............................................................................................... 46
4.2 Technical specification ....................................................................................... 47
5. Installation .............................................................................................................. 50
5.1 General safety instructions................................................................................. 50
5.2 Setup ................................................................................................................. 51
5.3 Water connection ............................................................................................... 53
5.4 Drain connection ................................................................................................ 54
5.5 Electric connection ............................................................................................. 54
5.6 Start-up and commissioning............................................................................... 55
6. Operation manual .................................................................................................. 57
6.1 Safety tips for the user ....................................................................................... 57
6.2 Operation elements ............................................................................................ 58
6.3 Introduction to the device operation ................................................................... 60
6.4 Manual programming ......................................................................................... 62
6.4.1 Setting of cooking temperature .................................................................. 62
6.4.2 Setting of cooking time .............................................................................. 62
6.4.3 Temperature setting and automatic pre-heating ........................................ 63
6.4.4 Selection of operation mode ...................................................................... 63
6.4.5 Cooking with use of core (option) .............................................................. 65
6.4.6 Food preparation with use of delta T function ............................................ 66
- 39 -
Programming of the multiple-phase cooking ............................................. 67
6.4.7
6.4.8 Setting of the automatic pre-heating of the device chamber ...................... 68
6.4.9 Opening and closing of steam outlet ......................................................... 69
6.5 Navigation in the recipes menu .......................................................................... 70
6.5.1 Saving the cooking program in the device memory ................................... 70
6.5.2 Loading the cooking program from the memory ........................................ 70
6.5.3 Modification of the cooking program save in the memory .......................... 71
6.5.4 Removing the program or its part from the memory .................................. 71
6.5.5 Importing and exporting the recipes from the USB memory ...................... 72
7. Cleaning and maintenance ................................................................................... 73
7.1 Safety advice ..................................................................................................... 73
7.2 Cleaning ............................................................................................................. 73
7.3 Fan cleaning ...................................................................................................... 74
8. Possible Malfunctions ........................................................................................... 75
9. Waste disposal ...................................................................................................... 76
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
- 40 -
1. General information
1.1 Information about the instruction manual
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
1.2 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards, which could lead to injury.
Please follow the instructions very carefully and proceed with particular attention
in these cases.
WARNING! Electrical hazard!
This symbol draws attention to potential electrical hazards. If you do not follow
the safety instructions, you may risk injury or death.
CAUTION!
This symbol highlights instructions, which should be followed to avoid any risk of
damage, malfunctioning and/or breakdown of the device.
NOTE!
This symbol highlights tips and information, which have to be followed for
an efficient and trouble-free operation of the device.
WARNING! Hot surface!
This symbol is a warning that the device surface is hot when in use. Ignoring this
warning may result in burns!
- 41 -
1.3 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
NOTE!
Read this manual carefully and thoroughly before any operation of the device,
and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
- violation of advice concerning operation and cleaning;
- use other than designed;
- alterations made by user;
- use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
1.4 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are copyright
and subject to other protection rights. Any person unlawfully using this
publication is liable to criminal prosecution.
1.5 Declaration of conformity
- 42 -
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.
2. Safety
This section provides an overview of all important safety aspects.
In addition every chapter provides precise safety advice for the prevention of dangers
which are highlighted by the use of the above mentioned symbols.
Furthermore, attention should be paid to all pictograms, markers and labels on the
device, which must be kept in a permanent state of legibility.
By following all the important safety advice you gain an optimal protection against all
hazards as well as the assurance of a safe and trouble-free operation.
2.1 General information
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
Knowing the contents of the instruction manual as well as avoiding mistakes and thus
operating this device safely and in a fault-free manner is very essential to protect
yourselves from the hazards.
To prevent hazards and to ensure optimum efficiency, no modifications or alterations to
the device that are not explicitly approved by the manufacturer may be undertaken.
This device may only be operated in technically proper and safe condition.
2.2 Safety instructions for use of the device
The specifications regarding the industrial safety are based on the Regulations of the
European Union applicable at the time of manufacturing the device.
If the device is used commercially, the user is obliged to ensure that the said industrial
safety measures concur with the state of the rules and regulations applicable at the time
in question for the entire period of use of the device and to comply with the new
specifications.
Outside the European Union, the industrial safety laws applicable at the place of
installation of the device and the regional territorial provisions must be complied with.
Besides the industrial safety instructions in the instruction manual, the general safety and
accident prevention regulations as well as environment protection regulations applicable
for area of application of the device must be followed and complied with.
- 43 -
2.3 Intended use
CAUTION!
The device has been designed and built for commercial use and should be
operated only by qualified personnel in kitchen facilities.
Safe operation is only guaranteed when using the device for its intended purpose.
Any technical interventions, as well as assembly and maintenance are to be made by a
qualified customer service only.
The combi steamer compact is designed only for preparation of appropriate food:
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use are
impossible.
The operator is liable for all damages resulting from inappropriate use.
- 44 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in your
country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
- Do not store outdoors.
- Keep it dry and dust-free.
- Do not expose it to aggressive media.
- Do not expose it to direct sunlight.
- Avoid mechanical shocks and vibration.
- In case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly.
If required refresh or renew.
- 45 -
⑧
⑨
⑩
⑪
⑫
⑬
⑭
4. Technical data
4.1 Overview of parts
⑭
⑬
⑫
①
③
④
②
⑥
⑤
⑪
Steam outlet
①
USB connection
②
Temperature probe connection
③
Fan
④
Housing
⑤
Microswitch
⑥
Adjustable feet
⑦
- 46 -
⑦
⑨
⑩
⑧
Drain tray
Steamer chamber
Rails for shelves
Glass door
Glass door handle
Steamer chamber illumination
Control panel
4.2 Technical specification
Name
Combi steamer compact
Model:
Code-No.:
Capacity: up to 6 x 1/1 GN up to 10 x 1/1 GN
Temperature range: 50 °C – 280 °C
Power supply:
Rigid water
connection:
Water pressure: max. 3 bar
Dimensions:
Weight: 85.0 kg 95.0 kg
Equipment:
We reserve the right to make technical changes!
D6110 Digital D10110 Digital
117261 117201
6.9 kW / 400 V
50/60 Hz 3 NAC
3/4“
W 519 x D 803 x H 770 mm W 519 x D 803 x H 1,010 mm
1 spare fat filter for the electronic cooling fan,
1 grate 1/1 GN, 1 tray 1/1 GN, 1 water supply hose
13.8 kW / 400 V
50/60 Hz 3 NAC
Protective devices
The device is equipped with the following protective systems:
Door microswitch
The microswitch interrupts the device operation after opening the door: either the
heating system and the fan are turned off. After closing the door the interrupted
cycle is continued. It is forbidden to manually activate the microswitch when the door
is opened.
Motor overheating protection
The fan motor is equipped with the overheating protection which interrupts the
operation in case of overheating. The fan motor operation is restored automatically
when the temperature drops to the value in the safe range.
- 47 -
Steamer chamber protective thermostat
When the temperature in the steamer chamber reaches 350°C the thermostat opens
the supply circuit of the device heaters.
That protection must be reactivated by the technical service personnel as its
operation indicates that other elements must be inspected.
CAUTION!
That protection must be reactivated by the technical service personnel as its
operation indicates that other elements must be inspected.
Properties of the combi steamer compact Digital
• Model CNS
• Maximum capacity up to 6 x 1/1 or 10 GN 1/1
• Digital control can be configured with up to 99 programmes, up to 9 cooking phases
per program
• Compact longitudinal sliding GN
• Functions:
Air circulation/steaming/combined steaming/ delta T cooking / cooking in low
temperature / quick cooling / steamer compact devices with the automatic
cleaning system on demand
• Reversible motor operation (clockwise/counterclockwise) to optimize the cooking
climate
• Steam generation with use of direct injection
• 3 levels of fan speed control
• Adjustable steam outlet
• Steamer chamber illumination
• Double door glazing, easy opening of internal door for cleaning
• Removable rails for shelves
• Front connection for the optional core
• Front USB connection
- 48 -
Pressure limiter for the combi steamer compact
Core tem
perature sensor
Auxiliary equipment (not included in the delivery)
devices
• Made from chrome-plated brass, connection 3/4”
• Initial setpoint 3 bar, adjustment from 1 to 6 bar
• Maximum inlet pressure 16 bar
• Maximum operational temperature 65°C
• Weight: 0.4 kg
Code-No. 533051
Manual shower
• Hose length 2 m
• 1/2” cut-off valve for rigid water connection
• Handle for fixing on the combi steamer compact
Code-No. 116005
• Cable length: approx. 1.8 m
Code-No. 116000
The ideal supplement:
The matching holder, Code-No. 116008
Core temperature sensor set
Consisting of core temperature sensor and matching
holder to attach to the combi steamers
• Magnetic holder: W 130 x D35 x H 30 mm
• Weight: 0.57 kg
Code-No. 116009
- 49 -
Loading...