Bedienungsanleitung
Instruction manual
Mode d’emploi
CT 100
CT 200
200.2010
200.2020
Pizzaofen
Seite 3 bis 16
D/A/CH
V4/1010
Pizza oven
from page 17 to 30
Four à pizza
de page 31 à page 44
GB/UK
F/B/CH
- 1 -
GB/UK
Keep this instruction manual
ready to hand at the product!
1. General Information 18
1.1 Information about the instruction manual 18
1.2 Key to symbols 18
1.3 Liability and Warrantees 19
1.4 Copyright protection 19
1.5 Declaration of conformity 19
2. Safety 20
2.1 General information 20
2.2 Safety instructions for use of the device 20-21
2.3 Intended use 21
3. Delivery, packaging and storage 22
3.1 Delivery check 22
3.2 Packaging 22
3.3 Storage 22
4. Technical data 23
4.1 Overview of parts 23
4.2 Technical specification 24
5. Installation and operation 25
5.1 Safety instructions 25
5.2 Installation and connection 26
5.3 Operating 27
6. Cleaning and maintenance 28
6.1 Safety advice 28
6.2 Cleaning 28
6.3 Safety instructions for maintenance 28
7. Possible Malfunctions 29
8. Waste disposal 30
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
- 17 -
1. General information
1.1 Information about the instruction manual
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
1.2 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards, which could lead to injury.
Please follow the instructions very carefully and proceed with particular attention
in these cases.
WARNING! Electrical hazard!
This symbol draws attention to potential electrical hazards. If you do not follow
the safety instructions, you may risk injury or death.
CAUTION!
This symbol highlights instructions, which should be followed to avoid any risk of
damage, malfunctioning and/or breakdown of the device.
NOTE!
This symbol highlights tips and information, which have to be followed for
an efficient and trouble-free operation of the device.
WARNING! Hot external surface!
This symbol is a warning that the device surface is hot when in use. Ignoring this
warning may result in burns!
- 18 -
1.3 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology. If you have any
questions, you should contact the manufacturer.
NOTE!
Read the instruction manual carefully before using the device. The manufacturer
does not accept liability for any damage or malfunction resulting from not
following the instructions for use.
The instruction manual should be kept near the device, easily accessible for anyone
wishing to work with or using it. We reserve the right to make technical changes for
purposes of developing and improving the useful properties.
1.4 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are copyright
and subject to other protection rights. Any person unlawfully using this
publication is liable to criminal prosecution.
1.5 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity.
If required we will be glad to send you the according declaration of conformity.
- 19 -
2. Safety
This section provides an overview of all important safety aspects.
In addition every chapter provides precise safety advice for the prevention of dangers
which are highlighted by the use of the above mentioned symbols.
Furthermore, attention should be paid to all pictograms, markers and labels on the
device, which must be kept in a permanent state of legibility.
By following all the important safety advice you gain an optimal protection against all
hazards as well as the assurance of a safe and trouble-free operation.
2.1 General Information
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
Knowing the contents of the instruction manual as well as avoiding mistakes and thus
operating this device safely and in a fault-free manner is very essential to protect
yourselves from the hazards.
To prevent hazards and to ensure optimum efficiency, no modifications or alterations to
the device that are not explicitly approved by the manufacturer may be undertaken.
This device may only be operated in technically proper and safe condition.
2.2 Safety instructions for use of the device
The specifications regarding the industrial safety are based on the Regulations of the
European Union applicable at the time of manufacturing the device.
If the device is used commercially, the user is obliged to ensure that the said industrial
safety measures concur with the state of the rules and regulations applicable at the time
in question for the entire period of use of the device and to comply with the new
specifications.
Outside the European Union, the industrial safety laws applicable at the place of
installation of the device and the regional territorial provisions must be complied with.
Besides the industrial safety instructions in the instruction manual, the general safety and
accident prevention regulations as well as environment protection regulations applicable
for area of application of the device must be followed and complied with.
- 20 -
CAUTION!
o The device is not intended for use by individuals (including children) with physical
or mental disabilities, insufficient experience, and/or insufficient knowledge unless
such persons are under the care of a person responsible for their safety or have
received instructions regarding appropriate use of the device.
o Children should be observed to ensure that they are not playing with the device.
o Preserve this manual safely. When passing on/selling the device to a third party,
the manuals must be handed over along with the device.
o Every person using the device must act in accordance to the manuals and under
consideration of the safety advice.
o The device is to be used indoors only.
2.3 Intended use
CAUTION!
This device has been designed for commercial use only and must be operated by
qualified kitchen personnel only.
Safe operation is only guaranteed when using the device for its intended purpose.
Any technical interventions, as well as assembly and maintenance are to be made by a
qualified customer service only.
The pizza oven is exclusively intended for pizza baking.
The pizza oven shall not be used for:
- Baking cake, bread, bread rolls and similar kinds of pastry;
- Preparing or warming up the food dishes.
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use are
impossible.
The operator is liable for all damages resulting from inappropriate use.
- 21 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately after
receipt.
In case of visible damage do not accept or accept the delivery with reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in your
country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
- Do not store outdoors.
- Keep it dry and dust-free.
- Do not expose it to aggressive media.
- Do not expose it to direct sunlight.
- Avoid mechanical shocks and vibration.
- In case of longer storage (> 3 months) make sure you check the state of the
packaging and the parts regularly. If required refresh or renew.
- 22 -
ON/OFF
4. Technical data
4.1 Overview of parts
Door handle
Ventilation
slits
Door with
glass window
Control Panel
Temperature control for
upper heating element
Temperature control for
lower heating element
Control panel
Control lamp for
upper heating element
switch
Control lamp for
lower heating element
- 23 -
4.2 Technical specifications
Description: Pizza oven
Model:
Item no.:
Temperature
range:
Connection: 3 NAC 380V 50 Hz
Power: 4200 W 8400 W
Dimensions: W 890 x D 880 x H 430 mm W 890 x D 880 x H 750 mm
Dimensions
Baking chamber:
Capacity: 4 Pizzas Ø 30 cm 2 x 4 Pizzas Ø 30 cm
Weight: 68 kg 98 kg
Subject to technical changes and alterations!
W 610 x D 610 x H 140 mm 2 x W 610 x D 610 x H 140 mm
CT 100 CT 200
200.2010 200.2020
50° - 400°C
Additional accessories (not included in the packaging)
Base unit Pizza oven
CT 100 and CT 200
Stainless steel
W 895 x D 735 x H 900 mm
Weight: 17 kg
Code-No.: 200.315
- 24 -
5. Installation and operation
5.1 Safety instructions
WARNING! Electrical hazard!
The device must only be connected to a properly installed single socket with
protective contact.
Never yank cord to disconnect from outlet.
Cable must not touch any hot parts.
• See that the cable does not touch any heat sources or sharp edges. Do not let the
cable dangle over the counter edge.
WARNING! Hot surface!
During operation some elements of the device very become hot. To avoid burns,
do not touch hot elements!
• Do not use the device in case it does not function properly, has been damaged or
dropped.
• Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.
• Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
• In the event of thunder storms (lightning etc.) immediately switch off the power
supply. This will prevent damage to the appliance caused by strokes of lightning.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!
- 25 -
5.2 Installation and connection
CAUTION!
The installation and maintenance of the appliance should only be carried out by
trained personnel!
• Discard the complete packing material after unpacking the device.
• Remove the protective foil from the appliance. Ensure that it has been completely
removed.
• Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.
• Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
• You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
NOTE!
This appliance is not suitable for built-in use nor for being set up in multiple inline series.
• Place the appliance in well-ventilated rooms.
• Keep a minimum safety distance of at least 20 cm to walls or other objects.
• Arrange the appliance so that the power plug and control panel are easily accessible.
• Do not place inflammable acidic or alkaline materials or cloths close to the appliance
since this may reduce the operational life of the appliance and may involve the
danger of deflagration.
• The rear side of the appliance is fitted with an earthing pin. Please connect the
earthing cable to a copper wire ( minimum diameter 2 mm²) in accordance with the
generally applicable safety regulations.
- 26 -
5.3 Operating
• Connect the appliance to a single, earthed power socket.
• Switch on the appliance using the ON/OFF switch.
• The temperature may be regulated separately by means of the temperature controls
for each baking chamber.
• Each baking chamber has two heating elements, which can be regulated by the
temperature control for top and bottom heat. The pilot lamps will light up accordingly.
• Select the desired temperature.
• The controllable temperature range of the pizza oven is from 50°- 400°C. The
recommended temperature is between 300° - 400°C.
• When the set temperature has been reached, the pilot lamp goes out.
NOTE!
Always pre-heat the pizza oven before baking pizzas!
• Open the door of the pizza oven using the door handle.
• Place the pizzas (max. 4 pizzas Ø 30 cm) in the baking chamber of the pizza oven
and close the oven door.
• Do not leave the pizzas unattended during the baking process.
• Keep an eye on the baking process through the glass window.
CAUTION!
Do not open the door of the pizza oven during operation!
• When the pizza is ready, switch off the appliance and only then open the door.
• Remove the baked pizza from the oven.
WARNING! Danger of burns!
During operation some parts of the appliance get very hot. Do not touch these
parts with bare fingers or hands. Wear protective gloves which cover the wrists
when removing pizzas from the oven and use the appropriate kitchen utensils
with long handles in order to avoid burns.
• On completion of the baking process, turn the temperature control anti-clockwise to
the „0“ mark. Switch off the appliance with the ON /OFF switch.
• Disconnect the appliance from the power socket (pull the power plug!!!) if it is no
longer to be used.
- 27 -
6. Cleaning and maintenance
6.1 Safety advice
o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!
6.2 Cleaning
o The device should be cleaned regularly.
o Clean the outer housing of the appliance, the oven chambers and the baking stone
with a soft, damp cloth and a mild detergent.
o Apply a final wipe with a clean cloth to remove residues of cleaning agents.
o Do not use caustic cleaning agents to clean the appliance.
o Use soft cloth only and make sure you never use any kind of abrasive agents, which
could scratch the surface.
o After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.
6.3 Safety instructions for maintenance
o Check the mains connection cable for damage from time to time. Never operate the
device when the cable is damaged. A damaged cable must immediately be replaced
by customer service or a qualified electrician to avoid dangers.
o In case of damage or malfunction, please contact your stockist or our customer
service centre. Pay attention to the troubleshooting tips in pt. 7.
o Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
- 28 -
7. Possible Malfunctions
Problem Cause Solution
Power socket connected,
power on, power control
lamp on, but appliance does
not heat up.
Power on, temperature
control set, temperature
rises but cannot be
regulated (selected).
Power on, appliance
switched on, but control
lamp does not come on.
Power on, control lamp does
not come on and the
appliance does not heat up.
The above mentioned problem cases are exemplary and just meant for orientation.
If these or similar problems should occur, switch off the device immediately and
stop the use. Contact qualified professionals or your retailer for further inspection
an repairs.
• Thermostat defective.
• Heating element burnt
out.
• Temperature control
defective
• Control lamp defective. • Contact retailer
• Power supply not
working properly, no
voltage.
• The fuse is blown.
• Contact retailer
• Contact retailer
• Contact retailer
• Check power
supply and cable
connection.
• Contact retailer
- 29 -
8. Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for
use before disposal. For that purpose disconnect device from mains supply and
remove mains connection cable from the device.
NOTE!
For the disposal of the device please consider and act
according to the national and local rules and
regulations.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
- 30 -
Loading...