Read this instruction manual before using and keep it available
at all times!
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
Diese Bedienungsanleitung beschreibt di e Installation, Bedienung und Wartung d es Geräts und gilt als wichtige Infor mationsquelle und Nachschlagewer k. Die Kenntnis aller enthaltenen Sicherh eitshinweise und Handlungsanw eisungen schafft die Voraussetzung f ür das sichere und sachgerechte Ar beiten mit dem Gerät. Darüber hinaus müssen die für den Einsatzbereic h des Geräts geltenden örtlichen Unfall verhütungsvorschriften und allgemeine n Sicherheitsbestimmungen eingehalten werden. Diese Bedienungsanleitung is t Bestandteil des Produkts und muss in unmittelbarer Nähe des Geräts für das In¬stallations-, Bedienu ngs-, Wartungs- und Reinigungspers onal jederzeit zugänglich auf¬bewahrt werd en. Wenn das Gerät an eine dritt e Person
weitergegeben wird, muss die Bedienungsa nleitung mit ausgehändigt werden.
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
2 / 26 700898
Safety
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
, die
1.2Safety instructions
Electrical Current
• Too high a mains voltage or incorrect installation may cause electric shock.
• The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
• To avoid short-circuit, the appliance should be kept dry.
• If there are malfunctions during operation, disconnect the appliance from the
power supply.
• Do not touch the appliance’s plug with wet hands.
• Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
• Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
• Do not transport the appliance, holding it by the power cord.
• Do not allow the power cord to come into contact with heat sources or sharp
edges.
• Do not bend, pinch nor knot the power cord.
700898 3 / 26
Safety
EN
• Always completely unwind the power cord.
• Never place the appliance or other objects on the power cord.
• Always take hold of the plug to disconnect the appliance from the power supply.
• Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Incorrect operation of the appliance ma y cause fire or explosion hazard due to igniti on of its content.
Fire hazard / flammable materials hazard / explosion hazard!
• Do not use any electric devices in the appliance.
• Do not store nor use petrol or other flammable liquids and gases in the vicinity of
this or any other appliance. Those gases may cause fire or explosion hazard.
• Do not put into the appliance any explosive materials, like sprays filled with
flammable propellants. Contents of containers filled with flammable gases and
liquids may leak in low temperatures, and the contents may catch fire from
sparks generated by an electric appliance. Explosion hazard!
• In the case of coolant leakage, pull the plug from the socket. Remove all
sources of ignition in the vicinity, ventilate room and contact technical service.
Avoid coolant getting in contact with eyes, as it may cause serious eye damage.
• Never use any flammable liquids for cleaning the appliance or its parts. Gases
released may cause fire or explosion hazard.
• In the case of fire, disconnect the appliance from the power supply before
attempting adequate fire-extinguishing actions.
• Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
• Defrosting process may not be sped up with mechanical means or heat energy
sources (candles or heaters) nor with any other means. Vapour produced may
cause short-circuit and too high temperatures may damage the appliance.
• All ventilation slots should not be obstructed during operation.
• Never attempt to damage cooling installation of the appliance.
Operating personnel
• This appliance is not intended to be used by persons (including children) with
limited physical, sensory or mental capabilities, nor by persons with limited
experience and/or limited knowledge.
• Children should be supervised to ensure that they are not playing with or
switching the appliance on.
Improper Use
4 / 26 700898
Safety
EN
• Unintended or prohibited use may cause damage to the appliance.
• The appliance may only be used when its technical condition is flawless and
allows for safe operation.
• The appliance may only be used when all connections are executed according
to rules of law in force.
• The appliance may only be used when it is clean.
• Use only original spare parts. Never attempt to repair the appliance on your own.
• Do not introduce any changes in the appliance nor modify it.
• Do not drill hole in the appliance nor install any objects on it.
• Do not place any heavy objects on the appliance.
700898 5 / 26
Safety
EN
1.3Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
– Cooling, freezing and storing suitable food products and food
preparation.
The appliance is intended for operation in maximum ambient temperature of 32°C
and relative humidity of 65%.
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
The following is an unintended use:
– Storing flammable or explosive objects and liquids, such as ether,
petroleum or adhesives;
– Storing explosive materials, like sprays filled with flammable propellants;
– Storing pharmaceutical products or preserved blood;
– Storing live pets.
6 / 26 700898
General information
EN
2 General information
2.1Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
The warranty period for this appliance is 24 months, counted from the purchase
date.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.
700898 7 / 26
Transport, Packaging and Storage
EN
3 Transport, Packaging and Storage
3.1Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.
8 / 26 700898
Technical Data
EN
4 Technical Data
4.1Technical Specifications
Version / Characteristics 700898 / 700899
• Colour: black
• Cooling: compressor, circulating air
• Thermostat
• Control: electronic
• Digital display
• Internal lighting
• ON/OFF switch
• Automatic defrost function
• Evaporation of condensed water
• Insulation: cyclopentane, 60 mm
• Type of shelves: grate, lacquered
• Height-adjustable shelves
• Door type: leaf door, glass
• Front pane: cased / framed
• Type of glazing: double glazing
• Door hinge:
– right-hand side (700898)
– left-/right-hand side (700899)
• Door with no possibility for door hinge to be changed
• Key-locked (700899 only)
• Features:
– fridge at the top | freezer in the bottom (700898)
– fridge at the left-hand side | freezer at the right-hand side (700899)
– 4 swivel castors, 2 with brakes
– LED lighting, may be switched on separately
More information on the appliance is available in our website www.bartscher.com
or, pursuant to the Regulation (EU) 2019/2018, in our product data base at
https://energy-label.ec.europa.eu/. Enter article number for a given model.
700898 9 / 26
Technical Data
EN
Name:
Combination fridge/freezer 430L
Art. No.:
700898
Material:
steel sheet
Inner material:
plastic
Volume, in l:
430
Fridge/freezer temperature range, min.–
max., in °C:
0 - 10 / -18 - -23
Temperature control, in °C increments:
1
Ambient temperature, min.–max., in °C:
16 - 32
Energy efficiency class:
C
Coolant, amount in kg:
R290 / 0,100
Energy consumption, in kWh/year:
3650
Climate class:
N
Number of doors:
2
Number of shelves:
4
Shelf dimensions (W x D), in mm:
565 x 475
Distance between guide rail pairs, in mm:
15
Connected load:
0,767 kW | 230 V | 50
Dimensions (W x D x H), in mm:
705 x 775 x 2020
Weight, in kg:
129,0
We reserve the right to implement technical modifications.
10 / 26 700898
Technical Data
EN
Name:
Combination fridge/freezer 820L
Art. No.:
700899
Material:
steel sheet
Inner material:
plastic
Volume, in l:
820
Fridge/freezer temperature range, min.–
max., in °C:
0 - 10 / -18 - -23
Temperature control, in °C increments:
1
Ambient temperature, min.–max., in °C:
16 - 32
Energy efficiency class:
D
Coolant, amount in kg:
R290 / 0,080
Energy consumption, in kWh/year:
6570
Climate class:
N
Number of doors:
2
Number of shelves:
8
Shelf dimensions (W x D), in mm:
500 x 485
Distance between guide rail pairs, in mm:
15
Connected load:
1 kW | 230 V | 50 Hz
Dimensions (W x D x H), in mm:
1220 x 815 x 2000
Weight, in kg:
205,5
We reserve the right to implement technical modifications.
700898 11 / 26
Technical Data
EN
Fig. 1
1. Fridge fan
2. Fridge door with handle
3. Fridge ventilation openings
4. Freezer fan
5. Freezer door with handle
6. Freezer ventilation openings
7. Housing
8. Swivel castors (4 pcs, 2 with brakes)
9. Guide rails (4 pairs)
10. LED lighting
11. Grate (2 pcs per cooling chamber)
12. LED lighting ON/OFF switch
13. Freezer digital temperature
controller
14. Fridge digital temperature controller
4.2List of Components of the Appliance
700898
12 / 26 700898
Technical Data
EN
Fig. 2
1. Fridge fan
2. Housing
3. Fridge door with handle
4. Swivel castors (4 pcs, 2 with
brakes)
5. Lock (2 pcs)
6. Freezer fan
7. Guide rails (4 pairs)
8. LED lighting
9. Grate (4 pcs per cooling chamber)
10. Freezer door with handle
11. LED lighting ON/OFF switch
12. Freezer digital temperature
controller
13. Fridge digital temperature
controller
700899
700898 13 / 26
Installation and operation
EN
CAUTION!
Choking hazard!
Prevent children from accessing packaging materials, for instance: plastic
bags and EPS elements.
4.3 Functions of the Appliance
The appliance combines cooling and freezing functions, providing for rapid access
to chilled or frozen products in small space.
The glass doors allow you to see the food inside, which is perfectly displayed
thanks to the LED lighting that may be switched on and off.
5 Installation and operation
5.1Installation
• Do not place the appliance in hot environ ment or in the vicinity of flammable materials.
• The appliance requires sufficient airflow f or proper operation. Assure a minimu m lateral clearance of the appliance of 10 cm.
• Never cover nor block ventilation openings of the appliance.
Unpacking / Positioning
• Remove the appliance from the packaging and discard all the packing materials,
excluding the pallet.
• To install the appliance, perform the following steps:
– The appliance may only be transported to installation location in vertical
position. In order to avoid damage to the compressor, do not tilt the
appliance more than 45° when positioning or transporting it.
– Lift the appliance with the lift truck and move it to the planned installation
location. Be careful not to damage the appliance. Control the stability in
order not to lose the balance of the appliance.
– Do not drag nor push the appliance, as it may fall down. This may also
cause the damage to external elements or swivel castors.
– Remove the appliance from the pallet in the installation location and
install it.
– Attach swivel castors with brakes.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels affixed to the
appliance.
•Never place the appliance in humid or wet environment.
14 / 26 700898
Installation and operation
EN
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on a surface that is:
– even, with sufficient load-bearing capacity, resistant to water, dry and
resistant to high temperatures;
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• The electric socket should be easil y accessible so it is possible to quickly discon nect the power cord when necessar y. The electric socket should be easil y accessible so it is possible to quickly discon nect the power cord when necessar y. The electric socket should be easily accessi ble so it is possible to quickly discon nect the power cord when necessar y.
• Nie należy umieszczać urządzenia w g orącym otoczeniu ani w pobliżu materiałów łat wopalnych.
• The appliance requires sufficient airflow f or proper operation. Assure a minimu m lateral clearance of the appliance of 10 c m.
• Die Öffnungen am Gerät niemals abdec ken oder blockieren.
• Do not place the appliance in direct sunlight or in the vicinity of heat sources
(cooker, radiator, heating devices, etc.). Heat sources may negatively affect
power consumption, and restrict functions of the appliance, too.
• The electric socket should be easil y accessible so it is possible to quickly discon nect the power cord when necessar y. The electric socket should be easil y accessible so it is possible to quickly discon nect the power cord when necessar y. The electric socket should be easily accessi ble so it is possible to quickly discon nect the power cord when necessar y.
• Leave at least 10 cm clearance from flammable walls and items.
HINWEIS
IMPORTANT!
The appliance is not suitable for built-in installation.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• If the appliance was stored or transported vertically, leave it standing
horizontally for 12 hours before it is connected to electric power.
• Following an electric power outage, wait at least 3 minutes before reconnecting
the appliance to prevent a damage to the compressor.
700898 15 / 26
Installation and operation
EN
5.2Operation
Indications for User
• Place the shelves on the guide rails in a manner that is suitable for containers
with food to make optimal use of the internal chamber.
• Food packed in containers should be arranged on the grates so that proper
distances between them allow for sufficient air circulation inside the appliance.
Insufficient clearance hinder the cooling effect.
• In order to reduce the loss of cool air from the cooling compartment, the door
opening time should be as short as possible and the door should not be opened
too frequently.
• If possible, in the event of a sudden power failure, avoid leaving door open in
order to avoid loss of cool air from the cooling compartment.
• The power supply to the appliance should never be interrupted for more than 10
minutes.
• If the appliance is being switched off and will not be used for a longer period,
clean it thoroughly according to instructions in section 'Cleaning' and leave the
appliance door open, to prevent formation of mould.
Storing food in the refrigerator
For your appliance to operate the best way, follow the indications below:
• When inserting the food products, pay attention to free air circulation inside the
appliance.
• Food products or beverages should first be cooled to the suitable storage
temperature.
• If the food products are not cooled sufficiently prior to storing, the operating
efficiency of the appliance deteriorates and it may negatively influence the
cooled food products. Thus, avoid storing food products in rooms that are not
cool, for the cold might be lost when they are inserted in the refrigerator.
• The food products stored in the refrigerator should be packaged or covered.
• The food products with specific aromas, e.g.: fresh fish, foie gras, cheese,
should be stored in properly closed containers.
• Do not store bananas in the refrigerator because they are sensitive to low
temperatures.
16 / 26 700898
Installation and operation
EN
Tips for the user
• Shelves may be positioned at various heights. Arrange them adequately to
containers with meals and food product packages, so that the inner space of the
appliance is used optimally.
• To limit loss of cold air minimize the opening time of door during operation. Also,
do not open the door too frequently.
• If possible, in the event of a sudden power failure, avoid opening doors in order
to avoid loss of cool air.
• The power supply to the appliance should never be interrupted for more than 10
minutes.
• If the appliance is switched off for a longer period of time, the door of the deep
freezer should remain open.
700898 17 / 26
Installation and operation
EN
Button
Functions
Showing the set value, selection of parameters in the
programming mode or confirmation of the process
Manual starting of the defrosting
Selection of the parameter code in the programming
mode, increase of the displayed value
Selection of the parameter code in the programming
mode, decrease of the displayed value
Before First Use
1. Before use, clean the appliance observing instructions in section 6 'Cleaning'.
2. Then dry the appliance thoroughly.
3. Close the appliance door.
4. Plug the appliance into a suitable single socket.
Digital displays show current temperatures inside the appliance.
5. To set the temperature, follow indications provided in subsequent sections.
Descriptions pertain to both digital temperature controllers of the appliance.
NOTE!
The optimum temperature for cooling food is 6°C, and for freezing — -
18°C. If the right temperature for storing food is not maintained, the food
may turn.
Control elements and displayed messages
18 / 26 700898
Installation and operation
EN
LED
Status of the
active function
Meaning
illuminates
activated compressor
flashes
in delay
illuminates
defrosting in progress
flashes
defrosting delay
illuminates
fan activated
flashes
delay after defrosting
illuminates
degrees Celsius temperature unit indicator
flashes
in the programming mode
illuminates
degrees Fahrenheit temperature unit indicator
flashes
in the programming mode
LED indicators
The LED indicators in the digital display show the status of the active function:
Displaying the set value
1. Press the button shortly, to display the set value.
2. Press the button again or wait 5 seconds, to return to the previous
message.
Changing the set value (i.e. the required temperature)
1. Press the button and hold it pressed for at least 3 seconds.
The set value is displayed and the or LED indicator flashes on the digital
display.
2. The value may be increased or decreased with or button until the
digital display shows the required value.
3. Confirm the new value with the button or wait 10 seconds — then, the
value will be stored automatically.
700898 19 / 26
Installation and operation
EN
Automatic defrosting
The appliance defrosts automatically 4 times over 24-hour period. The timer
initiates with the first activation.
1. If there is a need for the change of automatic defrosting phases, press the
button and hold it for more than 2 seconds.
The digital display shows the symbol.
The defrosting cycle is immediately initiated; in such a case, the subsequent
defrosting cycle is executed after 6 hours.
Manual defrosting
Additionally, aside of the automatic defrosting, manual defrosting may be activated
any time.
1. Press the button and hold it pressed for more than 2 seconds.
The manual defrosting is initiated.
The digital display shows the symbol.
NOTE!
Water generated during defrosting evaporates automatically.
NOTE!
Subsequent settings or parameter changes should be introduced by
service personnel only.
20 / 26 700898
Installation and operation
EN
+
Button locking or unlocking:
– to lock, press both buttons concurrently and hold them
pressed for more than 3 seconds, until the digital display
shows the "OFF" message
– to unlock, press these buttons and hold them pressed for
more than 3 seconds, until the digital display shows the "ON"
message
+
Moving to the programming mode:
– press both buttons concurrently and hold them pressed for
more than 3 seconds; when the or LED indicators
flash, subsequent settings may be introduced
+
Return to the previously displayed message:
– press these buttons, to leave the programming mode and
return to the previously displayed message (value of
temperature inside the appliance)
Button combinations
Concurrent pressing of two buttons enable activation/deactivation of a number of
functions.
Switching the LED Lighting ON/OFF
The appliance is equipped with LED lighting, which is arranged on the right-/lefthand side along the guide rails. The LED lighting may be switched on and off
independently.
1. If needed, switch the LED lighting on, using the lighting ON/OFF switch (set it to
'I' position).
2. In order to switch the LED lighting on, set the lighting ON/OFF switch to 'O'
position.
Switching the Appliance OFF
1. After use or in order to clean the appliance, disconnect it from the socket (pull
the plug out).
700898 21 / 26
Cleaning and Maintenance
EN
6 Cleaning and Maintenance
6.1Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2Cleaning
ATTENTION!
Never use hot water to clean the appliance.
1. Clean the appliance regularly, at least once a week, and after manual
defrosting.
2. Remove all objects from the appliance and store them temporarily in a cool
room.
3. Remove all shelves from the appliance.
4. Clean the shelves with a mild washing agent and a soft cloth or sponge in warm
water.
5. Wipe thoroughly the guide rails, as well as inner and outer surfaces of the
appliance with a soft, damp cloth. Use a mild cleaning agent when required.
6. Wipe the washed surfaces with a cloth soaked in fresh water.
7. Finally, dry thoroughly all washed surfaces.
8. The interior of the appliance should be wiped regularly (once a month) with a
food-grade disinfectant.
9. Clean the appliance door and gasket/door seals of the appliance with a soft,
damp cloth and a mild cleaning agent. To end with, dry the door and
gasket/door seals thoroughly.
10. After cleaning, leave the appliance sliding door open for the appliance to dry
completely.
22 / 26 700898
Cleaning and Maintenance
EN
11. If the appliance is not to be used for a longer period of time, clean it according to
the instructions above. Leave the appliance open to prevent generation of
unpleasant odours inside.
Maintenance
We recommend you to have the appliance serviced at least once a year; if needed,
we recommend entering into a service agreement.
The following operations should be regularly performed by a qualified specialist:
– cleaning the condenser with suitable tools (vacuum cleaner or soft
brush);
– checking of electrical connections;
– checking of the thermostat and the sensor;
– checking of door and door seal.
Spare Parts
Spare parts for the purpose of repairing this appliance, as stipulated in Annex II to
the REGULATION (EU) 2019/2018, are available for at least eight years, counted
from the date of introduction of the last appliance of this model to market.
700898 23 / 26
Possible Malfunctions
EN
Error
Possible Cause
Solution
No functions
available
Plug improperly inserted
into a socket.
Remove the plug and insert it
properly in the socket
Electric power supply safety
fuse damaged
Check the fuse, connect the
appliance to another socket
No power supply
Check the electric power
supply
Temperature inside
the appliance is too
high / too low
Condenser obstructed with
dust
Contact the service company
Icy evaporator
Defrost the appliance
Direct sunlight or heat
sources in immediate
vicinity
Move the appliance away
from heat sources
Poor air circulation around
the appliance
Keep sufficient clearance
from walls or other objects
Ambient temperature too
high
Place the appliance in the
right place
Door is not closed properly
or it has been opened for
too long
Close the door tightly; limit the
door opening time to
minimum
Damaged or deformed door
seal
Contact the service company
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
24 / 26 700898
Possible Malfunctions
EN
Error
Possible Cause
Solution
Temperature inside
the appliance is too
high / too low
Too little clearance between
objects inside the appliance
Provide for sufficient
clearance between objects
inside the appliance
Appliance is overloaded
Reduce the number of stored
objects
Incorrectly set temperature
controller
Set the temperature control
correctly
Noise level of the
appliance rises
Appliance is not placed on
an even surface
Place the appliance on an
even surface
Loose nuts/screws
Tighten nuts/screws
Appliance touches walls or
other objects
Keep sufficient clearance
from walls or other objects
Objects in the appliance in
contact with each other
Provide for sufficient
clearance between objects
Water leak
Appliance is not placed on
an even surface
Place the appliance on an
even surface
Clogged condensed water
drain opening
Clear the condensed water
drain opening
Condensed water drip tray
damaged (if applicable)
Contact the service company
Condensed water overflows
the drip tray (if applicable)
Empty the condensed water
drip tray regularly
The following phenomena are not malfunctions:
– Various sounds that are generated by the cooler during operation are a normal
phenomenon and do not indicate any malfunctions.
– Splashing, bubbling and hums are generated by the coolant that circulates the
system.
– Short, louder whirring/hooting or clicking sounds may be heard when the
compressor of the appliance starts.
700898 25 / 26
Disposal
EN
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
8 Disposal
Electrical Appliance
Electrical appliances should be returned to designated collection points.
Coolant
The propellant used in the appliance is flammable. It should be utilised pursuant to
national regulations in force.
26 / 26 700898
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.