Bartscher Blow torch 1300FG Operating instructions

Bedienungs

anleitung

I

nstruction

manual

Mode

d’emploi

G

ebruiksaanwijzing

Instrukcja

obsługi

V2/0110

A555.302

Flambierbrenner mit Fuß

Seite 3 bis 5

Flambé burner with base

from page 6 to 8

D/A/CH

GB/UK

Brûleur à flamber avec pied

de page 9 à page 11

Flambeerbrander met voet

blz. 12 t/m 14

Palnik do flambirowania ze stopką

strony od 15 do 17

F/B/CH

NL/B

PL

- 1 -

valve

Keep the instruction manual
ready to hand near the device!

Technical description:

--------------------------------------------------------------------------

Description: ●
Item no.: ●
Model: ● Stainless-steel handle;
Dimensions: ● Ø 33 mm, H 158 mm
Adjustable turbo flame: ● up to 1300°C

--------------------------------------------------------------------------

Flambé burner with base
A555.302

Flame protection

Control knob

Ignition knob

Igniter

Air supply nut

Gas tank

Base

- 6 -

GB/UK

Filling

Intended use

The Flambé burner is designed for caramelizing crème brûlée, meringue, melting

cheese, peeling tomatoes, flaming of feather remains, crisping up foods and many
other purposes.

Safety instructions

ATTENTION!

For safety reasons the Flambé burner is delivered unfilled!

• Please do not use this device in case it does not function properly, is damaged or
has been dropped.

• Do not use any accessory or spare parts that were not explicitly recommended by
the manufacturer. These could lead to damages at the device and the warranty
expires.

• Always keep the Flambé burner out of the reach of children.

• Do not touch the flame protection during operation.

• Butane gas is easily inflammable so please be cautious during contact.

• Not at any time should you stick or throw the Flambé burner into open fire.

• Do not point the device at any time at living beings during ignition or operation.

• Not at any time should you store the device at places with direct solar radiation or

temperatures above 40°C.

• Do not use the device for more than 1 hour of continuous operation.

• Make sure that after use the control knob is turned to OFF-position all the way and

no gas is escaping.

• Let the device cool off prior to storage.

Filling of gas

• Please use high-quality butane gas only.

• Make sure the control knob is set to OFF-position.

• Insert the gas nozzle vertically into the filling valve

underneath the base and fill the gas tank with short,
effective pumping motions (Fig. 1).

• Wait for a few minutes after filling procedure so the
gas can stabilize.

Fig. 1

- 7 -

Ignition

• Turn the control knob clockwise 2/3 into ON-position.
The gas escapes with a sibilant sound (Fig. 2).

• Press the ignition knob. The flame forms
immediately (Fig. 3).

In case unexpectedly no flame should form during

ignition, although the control knob is open and gas is
escaping, please keep the ignition knob pressed and
carefully readjust the air supply nut. (Area of air supply
opening in the gas tube).

Temperature regulation

• Lower the burner flame down to approx.10-25 mm
using the control knob. An oversize flame will just
expend unnecessary amounts of gas.

• If needed, turn the air supply nut slightly to the right
in order to lock the flame temperature.

Switching off

Turn the control knob to OFF-position all the way (Fig. 4).

Fig. 2

Fig. 3

Fig. 4

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: [phone]
Germany fax: [phone]

- 8 -