KV1 Comfort
190031
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Technical Support Hotline: +49 5258 971-197
www.bartscher.com
Version: 3.0
Date of preparation: 2021-01-21
EN
Original instruction manual
1 Safety ............................................................................................................ 2
1.1 Explanation of Signal Words .................................................................... 2
1.2 Safety instructions.................................................................................... 3
1.3 Intended Use ........................................................................................... 6
1.4 Unintended Use ....................................................................................... 6
2 General information ....................................................................................... 6
2.1 Liability and Warranty .............................................................................. 6
2.2 Copyright Protection ................................................................................ 7
2.3 Declaration of Conformity ........................................................................ 7
3 Transport, Packaging and Storage ................................................................ 8
3.1 Delivery Check ......................................................................................... 8
3.2 Packaging ................................................................................................ 8
3.3 Storage .................................................................................................... 8
4 Technical Data ............................................................................................... 9
4.1 Technical Specifications .......................................................................... 9
4.2 Functions of the Appliance ..................................................................... 11
4.3 List of Components of the Appliance ..................................................... 12
5 Installation and operation ............................................................................ 13
5.1 Installation .............................................................................................. 13
5.2 Operation ............................................................................................... 16
6 Cleaning and Descaling ............................................................................... 28
6.1 Safety Instructions for Cleaning ............................................................. 28
6.2 Cleaning ................................................................................................. 28
6.3 Descaling ............................................................................................... 36
7 Possible Malfunctions .................................................................................. 41
8 Disposal ....................................................................................................... 42
190031 1 / 44
Safety
EN
Read this instruction manual before using and keep it available
at all times!
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
Diese Bedienungsanleitung beschreibt di e Installation, Bedienung und Wartu ng des Geräts und gilt als wichtige Infor mationsquelle und Nachschlagewer k. Die Kenntnis aller enthaltenen Sicherh eitshinweise und Handlungsanweisu ngen schafft die Voraussetzung f ür das sichere und sachgerechte Ar beiten mit dem Gerät. Darüber hinaus müssen die für den Einsatzbereich des Geräts geltenden örtlichen Unfallverh ütungsvorschriften und allgemeinen Sicherheitsbestimmungen eingehalt en werden. Diese Bedienungsanleitung is t Bestandteil des Produkts und muss in unmittelbarer Nähe des Geräts für das In¬stallations-, Bedienu ngs-, Wartungs- und Reinigungspers onal jederzeit zugänglich auf¬bewahrt werd en. Wenn das Gerät an eine dritt e Person
weitergegeben wird, muss die Bedienungsa nleitung mit ausgehändigt werden.
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
2 / 44 190031
Safety
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
, die
1.2 Safety instructions
Electrical Current
• Too high a mains voltage or incorrect installation may cause electric shock.
• The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
• To avoid short-circuit, the appliance should be kept dry.
• If there are malfunctions during operation, disconnect the appliance from the
power supply.
• Do not touch the appliance’s plug with wet hands.
• Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
• Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
• Do not transport the appliance, holding it by the power cord.
• Do not allow the power cord to come into contact with heat sources or sharp
edges.
• Do not bend, pinch nor knot the power cord.
190031 3 / 44
Safety
EN
• Always completely unwind the power cord.
• Never place the appliance or other objects on the power cord.
• Always take hold of the plug to disconnect the appliance from the power supply.
• Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Flammable Materials
• Never subject the appliance to contact with high temperature sources, e.g.:
oven, furnace, open flame, heat generating devices, etc.
• To avoid fire hazard, clean the appliance regularly.
• Do not cover the appliance with, e.g., aluminium foil or cloths.
• Use the appliance only with materials designated to this end and with correct
temperature settings. Materials, groceries and left-overs remaining in the
appliance may catch fire.
• Never use the appliance near flammable or inflammable materials, e.g.: petrol,
spirit, alcohol, etc. High temperature triggers evaporation of these materials,
and, as a result of contact with sources of ignition, an explosion may occur.
• In case of fire, disconnect the appliance from the power supply before
attempting suitable fire-extinguishing actions.
• Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
Hot Surfaces
• Surfaces of the appliance become hot during operation. Burning hazard! High
temperature remains for some time after switching the appliance off.
• Do not touch any hot surfaces of the appliance. Use the provided handling
elements and holders.
• You may transport and clean the appliance after it cools down entirely.
• It is prohibited to sprinkle hot surfaces with cold water or flammable liquids.
Health hazard due to germs!
• The water tank must be regularly emptied and disinfected to eliminate the
possibility of accumulation of harmful and dangerous germs.
Supervised Usage only
4 / 44 190031
Safety
EN
• Only supervised appliance may be used.
• Always remain in an immediate vicinity of the appliance.
Operating Personnel
• The appliance may only be operated by qualified personnel and trained
specialist personnel.
• This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
• Children should be supervised to ensure that they are not playing with or
switching on the appliance.
Improper use
• Unintended or prohibited use may cause damage to the appliance.
• The appliance may only be used in a technically flawless condition, providing for
safe use.
• The appliance may only be used with connections in a technically flawless
condition, providing for safe use.
• The appliance may only be used clean.
• Use only original spare parts. Never attempt to repair the appliance on your
own.
• Do not attempt to modify nor alter the appliance.
190031 5 / 44
General information
EN
1.3 Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
– Preparation of various types of coffee beverages, for example: coffee,
cappuccino, espresso, etc.
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
2 General information
2.1 Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
6 / 44 190031
General information
EN
Our coffee makers are constructed with components that are subject to wear and
tear. As a rule, with correct maintenance of coffee makers, the following
components that are subject to wear and tear sustain dispensing of the following
amounts of beverages:
– brewing unit: 50.000 dispensing instances
– pumps, drain valve, grinder and seals: 25.000 dispensing instances
Failures of these components that are subject to wear and tear after their reaching
reference dispensing amounts are not considered to be coffee maker flaw.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.
190031 7 / 44
Transport, Packaging and Storage
EN
3 Transport, Packaging and Storage
3.1 Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.
8 / 44 190031
Technical Data
EN
Name:
Automatic coffee machine KV1
Comfort
Item No.:
190031
Material:
Plastic
Grinder material:
Steel
Number of brewing unit groups:
1
Water tank volume, in l:
6
Coffee container volume, in g:
1.000
Programs with the possibility of
individual settings:
23
Pump pressure, in bar:
19
Outlet, height regulation, from–to, in
mm:
110 - 165
Dregs container volume, no. of cups,
approx.:
35
Designed for cups/day:
80
No. of cups of 120 ml/h, max.:
40
Minimum brewing volume, in ml:
25
Power supply:
2,7 kW | 230 V | 50/60 Hz
Dimensions (W x D x H) in mm:
390 x 511 x 582
Weight in kg:
19,4
4 Technical Data
4.1 Technical Specifications
We reserve the right to implement technical modifications!
190031 9 / 44
Technical Data
EN
Version / Characteristics
• Fully automatic
• Control: touch
• Settable parameters: grinding coarseness with 5-level scale, coffee dosing,
amount of water, water temperature, amount of milk, video display
• Programs:
– 23, pre-set, individual write-over possible
– Programming: password protected
• Operating system: Android
• Video display:
– individually savable via USB
– up to 10 videos may be saved
– during coffee preparation and during breaks
– 1 video may be selected for all processes
• USB port
• Detachable water tank
• Display:
• programs, status, volume, maintenance messages, error messages,
volume
– Size: 7"
– Advertising recordings, individually programmable
• Automatic switch-off
• Grinder: conical burr grinder
• Pressure system: piston pressure
• Descaling signal
• Fill level indicator
• ON/OFF switch
• Hot water function
• Hot milk function
• Milk frother
• Cleaning program
• Dregs container is dishwasher safe
• Ground coffee option: no
• 2 cups function
• Water supply: 3 options
– Water tank
10 / 44 190031
Technical Data
EN
– Fixed water connection ½"
– Water supply from external water tank
• Milk supply: external via a milk hose
• Other features:
– Cup counter (per program and total)
– Cleaning cycles memory
– Milk temperature settable in individual programs
– Possibility of concurrent preparation of coffee and milk frothing
– Base plate with a cut-out for automatic residue removal (in combination
with KV1 dregs container with discharge opening — available as an
option)
• The set includes:
– 2 milk hoses, 50 cm;
– 1 water supply hose, 150 cm;
– 1 water supply hose, 200 cm
4.2 Functions of the Appliance
The appliance is designed for preparing various coffee beverages, for example:
coffee, espresso, cappuccino, or latte macchiato, with the use of coffee beans and
cold water, and it is ideal for cafés, cafeterias and offices.
190031 11 / 44
Technical Data
EN
4.3 List of Components of the Appliance
12 / 44 190031
Installation and operation
EN
1. Coffee container
2. Coffee container cover
3. Grinder with selector wheel
4. Control panel
5. Brewing unit
6. Hot water outlet
7. Coffee outlet
8. Milk hose
9. Grate for placing small cups
10. Drip tray
11. Drip grate
12. Dregs container
13. Water tank fill level indicator
14. ON/OFF button
15. Water tank
16. Interface
17. Mains switch
18. Power cord socket
19. Water connection
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
List of Components
5 Installation and operation
5.1 Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
• Never place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
190031 13 / 44
Installation and operation
EN
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
• Mind the sufficient clearance from the walls and other flammable objects or
objects that are prone to discolouration. This clearance must be at least 5 cm
from the back and both sides, and 15 cm from the top. Note the fire safety
provisions at the place of installation.
• When in operation, the appliance may not be installed in a cabinet.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Do not use the appliance with an external timer or remote control.
Water Supply
For the purpose of supplying water, the appliance comes with a factory-installed
water tank.
If needed, the appliance may be connected to water mains system or external water
tank (which is located at the same height as the appliance).
In order to utilise the connection, consider the following information:
– max. input water pressure is 3 bar
– min. input water pressure is 1 bar
Important Indication:
Starting with water hardness of 5° dH (German degrees), a water softening
device should be installed. We recommend the following products from
our range:
– Water filtering system for coffee makers, art. No. 109881
– Water softening device, WEH1350, art. No. 109878
14 / 44 190031
Installation and operation
EN
1. Connect one end of the delivered water
supply hose (with 1/4" thread) to the water
connection stub at the back face of the
appliance, and the second end (with 1/2"
thread) with the water mains system
connection.
2. In 'Machine setting' menu,
select 'Water supply mode'
option.
To supply the appliance from water mains system, perform the following steps:
Step 1: Water supply hose connection
Step 2: Setting the water supply mode
190031 15 / 44
EN
3. Select the 'Tap water supply'
option.
Step 3: Open the water mains system tap
5.2 Operation
Important indications
• Fill the water tank solely with fresh potable water.
• Never fill the water tank with warm/hot water, milk nor any other liquid.
• Never fill the coffee container (ground coffee container) any instant coffee,
cocoa nor any other powder mixtures. The appliance might get damaged.
• Never fill the coffee container with specially prepared coffee beans (e.g. coated
with cocoa or sugar), as this might cause damage to the appliance.
• The coffee container may be filled only with roasted coffee beans. Rice, soy
beans, cocoa beans, nuts, sugar, spices, etc., are prohibited.
• Always store coffee beans in dry, shaded place. Humid beans may damage the
grinder.
• Do not keep coffee beans in the coffee container if the appliance is not to be
used for a longer period of time. Coffee beans may attract humidity and clog the
grinder.
Preparation of the appliance
1. Before use, clean the appliance, observing instructions in section 'Cleaning'.
Installation and operation
16 / 44 190031
Installation and operation
EN
3. Press the ON/OFF switch at the front face of the
appliance, to switch the appliance on.
2. To safely start up the appliance, read the following indications carefully.
3. Fill the water tank with fresh drinking water.
4. Mind the filling level. It may not exceed the MAX marking.
5. Fill the coffee container with coffee beans.
Appliance Start-up
1. Plug the appliance into a suitable single socket.
2. Set the mains switch at the back of the appliance to 'I'.
With first use, the coffee machine performs an auto-test and cleaning. This helps
the appliance to achieve better working conditions. This process cannot be omitted.
WARNING! Risk of burns!
During the cleaning process, hot water flows from the coffee outlet onto
the drip tray.
Avoid contact with the outflowing hot water.
190031 17 / 44
EN
1. Beverage selection icons
2. Setting button
3. Time button
4. Beverage short-cut access button
Press the setting button and hold for 3 seconds to go to the short-cut access
menu and introduce the necessary settings immediately.
By swiping the short-cut access button left or right, you may go to the next
beverage selection.
Control Panel
Installation and operation
18 / 44 190031
Installation and operation
EN
1. In menu, select 'Machine
setting', and then 'Language
setting' option.
2. For 'Language setting'
option, select the language.
3. To end with, press the 'Back'
button, to continue with the
preferred settings.
4. For 'Water supply mode'
select one of the connection
methods:
– water tank
– fixed water
connection
– external water tank
5. To end with, press 'Back'
button.
Preferred Settings
190031 19 / 44
Installation and operation
EN
6. For 'Maintenance mode',
introduce water hardness
level in local water mains
system.
7. To end with, press 'Back'
button.
8. For 'Security&privacy',
select an option: password
protection or no protection
9. To end with, press 'Back'
button.
10. For 'Individual settings',
carry out the requested
settings.
11. To end with, press 'Back'
button.
12. In 'Machine setting' menu,
select 'Automatic switch
on/off' option.
20 / 44 190031
Installation and operation
EN
13. Set the required time for
automatic switching
ON/OFF.
14. Press 'OK' button, to
confirm.
15. To introduce subsequent
settings, press 'Back' button.
16. For 'AD-Standby' option,
execute the required
settings.
17. To end with, press 'Back'
button.
The beverage selection will
appear on the display.
18. Press the selected beverage
icon, to set the beverage's
parameters.
19. Press the setting button,
located at the top right, and
hold it for 3 seconds, to
introduce subsequent
settings.
190031 21 / 44
Installation and operation
EN
3. If during preparation the coffee flows very
slowly or does not flow out completely,
set the grinding coarseness to 4 or 5.
4. If the ground coffee is dark, we recommend higher coarseness settings: 4 or 5.
The changes to the grinding coarseness will
only be noticeable after 2 or more fresh cups
of coffee are brewed.
1. In 'Machine setting' menu, select
'Beverage setting' option.
2. Use the '<' and '>' setting buttons, and
execute subsequent beverage settings,
e.g. coffee strength, amount of hot milk,
amount per cup.
This setting is not stored for subsequent use.
3. To interrupt the setting, press 'Cancel'
button.
, beverage settings, appliance settings, et c., select from amongst various setting o ptions by pressing the '∧' and '∨ ' setting buttons.
Grinding coarseness setting
1. The coarseness of the ground coffee must be adapted to the selected coffee
beans.
NOTE: The grinding coarseness may only be set when the appliance is not
preparing any beverages.
2. Open the grinder cover. It is found before the coffee container.
Use the adjustment knob to set the selected grinding coarseness from 'fine'
(grinding level 1) to 'coarse' (grinding level 5). The grinder is factory-set to level 3.
Preparing Beverages
The appliance may still contain coffee ground during factory testing, hence the first
2–3 cups after start-up should not be drunk.
22 / 44 190031
Installation and operation
EN
1. Connect firmly the milk hose with the milk
frother and the milk container.
2. Place a cup under the coffee outlet and
press, for example, 'CAPPUCCINO' icon to
prepare the selected beverage.
When the 'Please enjoy' message is
displayed, it means that cappuccino is ready.
1. Make sure the appliance is
in power output setting
mode.
2. Press the setting button (top
left section of the control
panel) and hold it for 3
seconds, to go to the setting
menu.
3. Introduce the requested
settings.
Preparing beverages with Milk
Further Settings
Program Setting
The following settings are available: Machine setting, Maintenance settings,
Statistics, Advertisement settings, Safety, Data protection, etc.
190031 23 / 44
EN
Message Settings
1. In 'Machine setting' menu,
select 'Advertisement
setting' option.
2. Then, select 'AD-Standby'
option.
The appliance switches into
Standby mode, when no
settings have been introduced
for a minute.
The video may be played in
Standby mode.
3. In 'AD-Standby', select one
of the options to store the
video.
Installation and operation
24 / 44 190031
Installation and operation
EN
4. Select video and press 'OK'
(only MP4 format is
supported).
1. In 'Advertisement setting'
menu, select 'ADWelcome' option.
Setting 'Welcome' Message
190031 25 / 44
Installation and operation
EN
2. Then, select one of the
options for storing video.
3. Select video and press 'OK'
(only MP4 format is
supported).
26 / 44 190031
Installation and operation
EN
1. In 'Advertisement setting'
menu, select 'AD-Making
beverage' option.
1. In 'Advertisement setting'
menu, select 'AD-Complete'
option.
2. Search for an image.
The image must be JPEG or
PNG format.
Setting 'AD-Making beverage' Message
Setting 'AD-Complete' Message
190031 27 / 44
Cleaning and Descaling
EN
3. In menu, select 'Maintenance' option,
and then 'Clean brew unit with
cleaning tablets' option.
6 Cleaning and Descaling
6.1 Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2 Cleaning
Cleaning the Brewing Unit
After a longer period of use, some ground coffee will build up in the brewing unit.
1. Remove the remaining ground coffee, cleaning the brewing unit thoroughly.
2. Use the right cleaning tablets to clean the brewing unit.
The cleaning process of the brewing unit lasts approx. 20 minutes.
28 / 44 190031
Cleaning and Descaling
EN
4. Remove the drip tray and the dregs
container, empty them and reinstall it
in the appliance.
5. Open the grinder cover.
6. Place a cleaning tablet in the pit.
7. Reinstall the cover and press 'OK'
button to confirm.
8. When the brewing unit cleaning
process is complete, remove the drip
tray and the dregs container.
9. Clean those elements and dry them.
10. To end with, reinsert the dregs
container and the drip tray in the
appliance.
190031 29 / 44
Cleaning and Descaling
EN
When the cleaning process is complete,
the appliance switches to the settings
menu.
4. In settings menu, select
'Maintenance' option, and then
'Clean milk unit with cleaning tablets'
option.
Cleaning the Milk System
1. Clean the milk system daily.
2. In a separate container, prepare a solution of water and commercially available
cleaning agent for coffee machines milk systems.
3. Observe indications on the packaging of the agent.
30 / 44 190031
Cleaning and Descaling
EN
5. Remove the milk hose from the milk
container or from the milk hose
opening in the drip grate.
6. Introduce the milk hose into the
container with milk system cleaning
agent solution.
7. Clean the container with the cleaning
agent.
8. Fill the container with fresh potable
water, in order to rinse the milk
system.
9. Remove the milk hose from the rinse
water container and introduce it into
the opening in the drip grate.
When the milk system cleaning process
is complete, the appliance switches to
the settings menu.
190031 31 / 44
EN
1. The milk frother should be cleaned
daily.
2. Press it simultaneously at both
sides and carefully remove from the
appliance.
3. Remove the milk hose from the milk
frother.
4. Disassemble the milk frother as
indicated in the picture above.
5. Components of the milk frother
should be washed under warm
running water.
Cleaning the milk frother
Cleaning and Descaling
32 / 44 190031
Cleaning and Descaling
EN
6. Wash the milk hose carefully under
running water, allowing water to run
also through the milk hose.
7. Reassemble the milk frother and
reinstall it in the appliance.
8. Secure the milk hose on the milk
frother.
After a longer period of use, the residues of
ground coffee may remain in the metal filter of
the brewing unit. They should be removed
regularly.
If these residues are not removed on time,
this may lead to build up of too high a
pressure.
Cleaning the metal filter
NOTE:
In order to secure full cleaning, we recommend to clean the metal filter,
when all other cleaning processes are executed.
1. Switch the appliance off and disconnect it from the power supply.
NOTE:
Remove the drip tray and the dregs container from the appliance.
190031 33 / 44
Cleaning and Descaling
EN
After preparation of 35 cups of coffee, the display will show the 'Empty the dregs
container' message.
1. Remove the drip tray.
2. The dregs container may be removed for cleaning as shown in the picture to
the right.
3. Empty the dregs container and the drip tray.
4. Wash both containers with warm water and reinsert them in the appliance.
When the drip tray is full, the display shows the 'Drip tray full' and 'Empty the drip
tray' messages.
7. Remove the drip tray and empty it.
8. Wash the drip tray and drip grate with warm water.
9. Reinstall the removed elements after cleaning.
2. Clean the metal filter manually, using a soft cloth or a soft brush and inserting it
carefully through the front opening.
3. When the filter is clean, reinsert the drip tray and the dregs container into the
appliance.
4. Restart the appliance, observing indications in 'Starting the Appliance' sections.
Cleaning the drip tray and the dregs container
• Do not use chemical solutions neither caustic cleaning agents nor alcohol to
clean the dregs container and the drip tray.
• Do not use any metal objects to remove soilings or dregs, to avoid damaging the
dregs container and the drip tray.
• If the need to clean the dregs container arises, the cleaning process must be
executed, as otherwise the appliance may be damaged.
• Proceed the following way during cleaning:
34 / 44 190031
Cleaning and Descaling
EN
1. Remove the water tank.
2. Wash the water tank thoroughly each
time it is filled with water.
3. Then, fill the water tank with fresh
potable water and reinstall it in the
appliance.
4. The water tank should always be
removed very carefully; never let it fall.
Should the water tank get damaged, it
must be replaced immediately.
1. Remove the coffee container cover
carefully.
2. Always clean the coffee container
with a dry cloth or a paper towel.
3. Reinsert the cover.
4. Never allow the coffee container cover
to fall. Should the cover get damaged, it
must be replaced.
Cleaning the water tank
Cleaning the Coffee Container
190031 35 / 44
Cleaning and Descaling
EN
If after a certain period of time, a certain
level of deposits is reached, the display
will start showing, alternately, the
following messages: 'Descaling' or
'Rinsing'.
4. In settings menu, select
'Maintenance', and then 'Descaling'.
6.3 Descaling
In the course of daily use of the appliance, depending on the local water hardness,
limescale may build up inside the appliance components. In order to maintain the
appliance in top condition, and in order to be certain that every brewing process
yields the best results, the appliance should be descaled from time to time.
1. Use only appropriate tablets for coffee machines for cleaning and descaling.
2. During descaling, always strictly observe manufacturer's indications concerning
safety, found on the package of the agent.
WARNING!
If, accidentally, the descaling agent comes into contact with eyes or skin,
rinse them immediately with fresh water.
3. Always execute the descaling process in full; interrupting it may cause damage
to the appliance.
The entire descaling process lasts approx. 40 minutes.
36 / 44 190031
Cleaning and Descaling
EN
5. Remove the drip tray and the dregs
container, empty them and reinstall
it in the appliance.
6. Place the milk hose in the drip grate
opening.
7. Prepare a solution of commercially
available cleaning agent for coffee
machines milk systems and fresh
potable water. Observe the
indications on the packaging.
8. Pour water into the water tank, and
reinstall the tank.
9. Press 'OK' button to confirm.
10. Remove the drip tray, empty it and
reinstall it in the appliance.
190031 37 / 44
Cleaning and Descaling
EN
11. Remove and empty the water tank.
12. Clean the water tank thoroughly.
13. Then, fill the water tank with fresh
potable water and reinstall it in the
appliance.
14. When the descaling process is
complete, remove the drip tray and
the dregs container.
15. Clean those elements and dry them.
16. To end with, reinsert the dregs
container and the drip tray in the
appliance.
When the descaling process is
complete, the appliance switches
to the settings menu.
38 / 44 190031
Cleaning and Descaling
EN
1. Make sure the appliance is in
beverage setting status mode.
2. Press the setting mode and hold
it for at least 3 seconds, to go to
the settings menu.
Transport des Gerätes
• Keep the packaging of the coffee machin e for subsequent transportation.
Transporting the Appliance
• Keep the packaging of the coffee machine for subsequent transportation.
• Make sure the water is removed from the appliance before transporting it to
prevent damage to the appliance.
WARNING! Risk of burns!
When emptying the water supply hose, hot water may flow from the coffee
outlet onto the drip tray.
Avoid contact with the outflowing hot water.
• As soon as the water emptying program is complete, the system of the
appliance will be reset for the first use instance, when the system is used the
next time.
• Empty the system in the water tank mode.
• After the water supply system is emptied, wipe the appliance carefully.
190031 39 / 44
Cleaning and Descaling
EN
3. In settings menu, select 'Machine
setting', and then 'Factory reset'
option.
4. Confirm the selection with 'OK'
button.
5. Then, select 'Empty the waterway'
option.
6. Press 'OK', to start emptying the
water system.
After the water system is emptied, the appliance switches off automatically.
7. After it switches off, remove the drip tray, and then empty and clean it.
8. After the water system is emptied, wipe the appliance carefully.
9. When re-starting the appliance, perform all the steps described in sections
'Preparation of the Appliance' and 'Starting the Appliance'.
40 / 44 190031
Possible Malfunctions
EN
Display Message
Cause
Solution
Empty the drip tray
The drip tray is full, and the
beverage preparation
functions are not operating
Remove the drip tray, empty
it and reinstall it in the
appliance
Empty the dregs
container
The dregs container is full,
and the beverage
preparation functions are
not operating
Remove the dregs
container, empty it and
reinstall it in the appliance
Fill the water tank
The water tank is empty,
and the beverage
preparation functions are
not operating
Fill the tank with fresh
potable water
Fill with coffee
beans
The coffee container is
empty, and the beverage
preparation functions are
not operating
Fill the coffee container with
coffee beans
Install the drip tray
The drip tray is removed,
and the beverage
preparation functions are
not operating
Install the drip tray in the
appliance correctly
System empty
Not enough water in the
appliance water supply
hose, and the beverage
preparation functions are
not operating
Press the 'OK' button, to
confirm
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
190031 41 / 44
EN
Display Message
Cause
Solution
Error codes 1–7
Errors cannot be defined
Switch the appliance off and
switch it back on
If the problem persists, pull
the plug out and contact the
service company
High pressure
The used coffee beans are
too dark or the coffee is
ground too finely
Set the coarser grinding
level of 4–5 or use a
coarsely ground coffee
Brewing unit filter clogged
Run the cleaning program
for the brewing unit
Brewing unit error
Internal component error
Restart the appliance
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
8 Disposal
Electrical Appliance
Disposal
Electrical appliances should be returned to designated collection points.
42 / 44 190031
Loading...