Bartscher AGN1800-1/1 Operating instructions

Original-Gebrauchsanleitung

V2/0817

18GN110

300181

Name

Clearing trolley 18GN110

for GN containers, GN baking trays, and trays

Code-No.:

300181

Material:

Nickel-chrome steel

Realization:

 Frame: pipes of square section 25.8 x 25.8 mm;
 Capacity: 18 GN containers 1/1 GN, depth 65 mm;
 One front and one back container lock;
 4 swivelling rubber castors, Ø 100 mm,

each with 1 buffer, 2 swivelling castors with stoppers;

 Easy assembling kit

Dimensions:

W 415 x D 610 x H 1890 mm

Maximum carrying
capacity:

80 kg in total, 10 kg per slot
Distance between slots:

80 mm

Weight:

20.2 kg

V1/0806

D/A/CH

GB/UK

Technical data

 Unpack the individual elements and remove the packaging material.
 Check completeness of delivery according to the list below.

- 5 -

Element

Number

Name

2

Side parts with 18 preinstalled
guides and 1 container lock per
each one

6

Cross members

2

Castors with stoppers

2

Castors without stoppers

4

Buffers for castors

1

Allen wrench

20

Square washers

12

Bolts

Delivery range / Part name

- 6 -

Fig. 1

1. First, install 6 cross members (upper,
lower and middle) to one side part of
the clearing trolley (fig. 1).

Place a square washer between the
upper cross member and side part,
lower cross member and side part, and
between the side part and each bolt,
and tighten those elements with use of
an Allen wrench.

With the middle cross members, place
a square washer only between the
side part and bolt, and tighten those
elements with use of an Allen wrench.

2. Connect 6 cross members with another
side part with use of washers and bolts
as above.

Fig. 2

3. Place the clearing trolley on its side and
attach the buffers for castors to the side
parts. Finally, screw the castors into the
side parts.

4. Place the clearing trolley on the castors and check
its stability.

5. Clearing trolley may be levelled with use of castors
by screwing or unscrewing them (fig. 3).

6. After placing the clearing trolley in required place
lock 2 castors with stoppers to prevent the
incidental relocation or falling down.

Fig. 3

Assembly

- 7 -

 Put the containers in the guides as required

and protect them with use of front and back
locks, lifting them a bit and placing before
the containers (fig. 4).

Fig. 4

Protection of containers

Cleaning instructions

 The clearing trolley should be periodically cleaned with use of moistened and soft cloth.
 Never use any cleaning agents which may scratch the trolley elements surfaces.
 Dry the clearing trolley with soft cloth.

Bartscher GmbH
Franz-Kleine-Str. 28
33154 Salzkotten phone: [phone]
Germany fax: [phone]

- 8 -