Original
-
Gebrauchs
anleitung
A120465 / 1KA10
A120466 / 2KA20
V2-1/0516
GB/UK
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 18
1.1 Safety instructions ................................................................................................ 18
1.2 Key to symbols ..................................................................................................... 21
1.3 Proper use ............................................................................................................ 22
2. General information ................................................................................................ 23
2.1 Liability and Warrantees ....................................................................................... 23
2.2 Copyright protection ............................................................................................. 23
2.3 Declaration of conformity ...................................................................................... 23
3. Transport, packaging and storage......................................................................... 24
3.1 Delivery check ...................................................................................................... 24
3.2 Packaging ............................................................................................................. 24
3.3 Storage ................................................................................................................. 24
4. Technical data ......................................................................................................... 25
4.1 Overview of parts ................................................................................................. 25
4.2 Technical specification ......................................................................................... 27
5. Installation and operation ....................................................................................... 27
5.1 Installation ............................................................................................................ 27
5.2 Operation .............................................................................................................. 28
6. Cleaning ................................................................................................................... 30
7. Possible Malfunctions ............................................................................................ 31
8. Waste disposal ........................................................................................................ 32
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
- 17 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions
in this instruction manual.
1.1 Safety instructions
•
The device is not intended for use by individuals (including children)
with physical or mental disabilities, insufficient experience, and/or
insufficient knowledge unless such persons are under the care of a
person responsible for their safety or have received instructions
regarding appropriate use of the device.
•
Children should be observed to ensure that they are not playing with
the device.
•
Never leave the device unattended when in use.
•
Only use the device indoors.
•
The device is not adapted for use with an external timer or remote
control.
- 18 -
This device may only be operated in technically proper and safe
•
condition.
•
Prevent access of children to the package materials like plastic bags
and foamed polystyrene elements. Suffocation hazard!
•
Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the device.
Do not attempt to repair the device yourself.
•
Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous for the
user or lead to damages of the device or personal injury, and further,
the warranty expires.
•
To prevent hazards and to ensure optimum efficiency, no modifications
or alterations to the device that are not explicitly approved by the
manufacturer may be undertaken.
DANGER! Electric shock hazard!
To avoid the hazard results please follow the safety instructions below.
•
Never allow the power cable to come into contact with heat sources or
sharp edges. The power cable should not hang over the side of the
working surface. Ensure that no one can step on or trip over the cable.
•
The power cable must not be folded, bent or tangled, and must always
remain fully unrolled. Never place the device or other objects on the
power cable.
•
Do not lay the power cable over carpets or other inflammable
materials. Do not cover the cable. Keep away the cable from
operating range and do not immerse it into water.
•
Check the power cord regularly for damage. Do not use the appliance
if the power cord is damaged. If this cable is damaged, it must be
replaced by customer service or a qualified electrician in order to avoid
dangers.
- 19 -
The supply cable must be disconnected from the socket only by
•
pulling the plug.
•
Never carry or lift the device by the supply cable.
•
In any case do not open the device housing. In case of electrical or
mechanical modifications the electric shock hazard will occur.
•
Never immerse the appliance, the power cord and the power plug in
water or other liquids; do not put it under running water and clean any
parts of the appliance in the in the dishwasher.
•
Do not use any acid agents and make sure no water ingresses the
device.
•
Never operate the device with moist hands or standing on wet floor.
•
Remove the plug from its socket:
-
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
HOT SURFACE! Burn hazard!
Follow the safety instructions listed in order to avoid the hazard:
•
In operation, the body and lid of the device are hot. Do not touch with
bare hands. Use the lid handle to lift up the lid.
•
The device stays hot for some time after switched off. Before draining
or pouring out the water, starting cleaning or moving the device, let it
cool down sufficiently.
- 20 -
HOT STEAM! Risk of scalding!
To avoid the effects of this risk, follow the safety instructions presented
below.
•
The evaporating steam is hot. Take extra care when opening or
removing the lid. The hot steam may cause burns to your hands and
face. Use protective gloves or saucepan cloth.
•
Use sausage tongs or long fork to handle the hot sausage.
1.2 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!
HOT STEAM!
This symbol indicates that during the operation the hot steam escapes from the
device. Risk of scalding if safety instructions are not observed!
- 21 -
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.3 Proper use
The operational safety of the device is assured only in case of proper use, according
to the operation manual.
All technical activities like installation and maintenance must be performed by the
qualified service personnel only.
The sausage warmer is designed to warm up sausages and maintain their
temperature.
Do not use the sausage warmer for:
- storage and heating of flammable, health hazardous and easily
evaporating liquids and materials, etc.
CAUTION!
Any use going beyond the intended purpose and/or any
different use of the device is forbidden and is not considered
as conventional.
Any claims against the manufacturer or his authorized
representative as a consequence of experiencing damages
resulting from unconventional use are impossible.
The operator is liable for all damages resulting from
inappropriate use.
- 22 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
- violation of advice concerning operation and cleaning;
- use other than designed;
- alterations made by user;
- use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.
- 23 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
- Do not store outdoors.
- Keep it dry and dust-free.
- Do not expose it to aggressive media.
- Do not expose it to direct sunlight.
- Avoid mechanical shocks and vibration.
- In case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly.
If required refresh or renew.
- 24 -
1
4. Technical data
4.1 Overview of parts
A120465
2
3
8
7
6
5
4
Lid handle
1
Hinged lid, removable
2
Body
3
Grate
4
Temperature adjustement knob
5
Heating control (orange)
6
Power control (green)
7
ON/OFF switch
8
- 25 -
A120466
2
1
1
2
3
- 26 -
9
8
7
6
Lid handle
1
Hinged lid, removable
2
Body
3
Temperature adjustment knob
4
Drain safety lock
5
Drain tap
6
Heating control (orange)
7
Power control (green)
8
ON/OFF switch
9
Grate (2)
10
5
4
9
8
7
6
5
10
4
4.2 Technical specification
Name
Sausage warmer
Code-No. / type:
Material: Stainless steel
Model:
Power: 1 kW / 230 V 50/60 Hz 2 kW / 230 V 50/60 Hz
Temperature
adjustment:
Size: W 270 x D 350 x H 240 mm W 535 x G 370 x H 240 mm
Weight: 5.65 kg 10.7 kg
Accessories:
We reserve the right to make technical changes!
A120465 / 1KA10
1 container,
without drain tap;
W 240 x D 300 x H 150 mm
1 lid, hinged, removable;
1 grate
30 °C to 90 °C
A120466 / 2KA20
2 containers,
each with drain tap
W 240 x D 300 x H 150 mm
2 lids, hinged, removable;
2 grates
5. Installation and operation
5.1 Installation
Positioning
• Unpack the device and remove all packing material.
• Remove the protective foil from the device. Would the residues of glue remain,
removed them with an appropriate solvent.
CAUTION!
Never remove the rating plate and any warning signs from the device.
• Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
• Never place the device on the flammable surfaces.
• Do not place the device near open flame, electric heaters or other heat source.
• Never place the device in humid or wet environment.
• When locating the device make sure there is a 10 cm gap from any walls or other
objects.
• When locating the device, make sure the power plug is easily available to
immediately unplug the device when necessary.
- 27 -
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device (see
rating plate). Connect the device only in case of compliance!
Connect the device only to properly installed single socket
with protective terminal.
• The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
5.2 Operation
• Before use, clean the device according to the instructions set out in point 6
“Cleaning”.
• Before use, for device code-no. A120466, make sure the drain taps are closed as
show in the photo below. The drain taps are equipped with the drain safety lock that
prevents them from unintentional opening. When the tap is closed the safety lock
should be located before the drain tap lever.
Drain tap lever
Drain safety lock
Drain pipe
NOTE!
For the device code-no. A120466, the containers may be controlled separately
by the control elements.
• Insert the grate at the bottom of the container and place the desired number of
sausages on it.
• Pour in the desired amount of water. Take into account the “MIN” and “MAX”
marks in the container.
- 28 -
WARNING! Risk of scalding!
When filling up the container do not exceed “MAX” mark. Splashes of hot
water may cause scalding!
NOTE!
Fill up the container with warm water to save time and energy!
• Place the lid on the container.
• Plug in the device to a single, grounded socket.
• Switch on the device with ON/OFF switch setting it at “I”. The green power control
should light up.
• Set the desired temperature between 30 °C and 90 °C with the temperature
adjustment knob. The orange heating control should light up.
• When the desired temperature has been reached, the orange heating control should
switch off. When the temperature in the container drops, the orange heating control
should light up again and the device should continue warming up to reach the set
temperature.
• In this way, the sausages may be kept warm during a desired time.
CAUTION!
Make sure the water level does not drop below “MIN”! Check the water level
regularly during operation and add water when necessary. Never use the
device without water!
• Take the sausages out of the container before serving.
HOT STEAM! Risk of scalding!
The steam may appear when lifting the lid and handling the sausages. It may
cause scalding to your hands, arms and face. Use a kitchen cloth or protective
gloves when opening the device! Use sausage tongs or long for to handle the
sausages.
• Before any scheduled break in operation, switch off the device with ON/OFF switch
setting it at “O” and disconnect the device (unplug!).
- 29 -
The device is equipped with the thermostat protection unit that will be
activated in case of thermostat failure. The device shall switch off automatically.
Note: when the thermostat protection unit is activated, unplug the device
and let it cool down. Notify the maintenance service or contact the
supplier.
6. Cleaning
CAUTION!
Before cleaning, set the ON/OFF switch at “O”and disconnect the device
from the mains (unplug!).
Let the device cool down.
The device is not designed to be rinsed with running water.
Do not use a pressure washer to clean the device!
Be careful and do not let the water into the device.
Cleaning
o Clean the device regularly.
o Clean it with a soft cloth only and never use any abrasive cleaning agents that
could cause damage to the surfaces of the device or its accessories.
WARNING! Risk of scalding!
Let the water cool down before removing it or draining it through the drain tap.
Splashes of hot water may cause scalding!
o Remove the grate from the container. Clean the grate with the wash brush in a warm
water with mild cleaning agent and rinse it under running water.
o Open the drain taps (device code-no. A120466) by lifting the drain safety lock
upwards and turning the lever towards the front. Drain the water out of the
containers via the drain taps to a jug. Place the jugs on a firm surface to avoid
the water to splash.
o From the container of the device code-no. A120465 drain the water out to
a jug or sink.
o Due to hygiene reasons, clean the containers twice a day. Clean the containers
with warm water and mild detergent. Rinse with clean water and dry thoroughly.
- 30 -
o For the device code-no. A120466, after draining the liquid also clean the drain taps.
Fill in the containers with warm water, add mild detergent and use a soft cloth to
clean. Drain the water through the drain taps. Rinse the containers with clean water
and let it flow through the drain taps.
o Clean the lid with running water and mild detergent, and a soft cloth.
Descaling
o Adverse water properties and salts, fat and spices from the sausages may contribute
to aggresive water content that may cause scaling at the bottom of the container, or
even chemical reactions with metal. Regularly descale the container.
Use popular, commonly available descaling products or water-vinegar solution.
CAUTION!
Lack of regular descaling of the device as set forth in the instruction manual
may constitute a ground for rejecting warranty claims.
Such claims are not covered by the warranty!
Storage
o When the device is not to be in use for longer time, clean it according to the above
description and store in a clean and dry place, frost and sun proof and away from
reach of children.
7. Possible Malfunctions
Problem
Cause
Solution
The temperature is set but
the control lights are not on.
The device is ON and
temperature adjustment
knob is set but the device
does not warm up.
The device switches off by
itself when operating.
• Power plug not in.
• Control light(s) broken.
• Heating element
broken.
• Thermostat broken. • Contact the supplier.
• Plug in.
• Contact the supplier.
• Contact the supplier.
- 31 -
8. Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit
for use before disposal. For that purpose disconnect device from mains
supply and remove mains connection cable from the device.
CAUTION!
For the disposal of the device please consider and
act according to the national and local rules and
regulations.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
- 32 -
Loading...