Bartscher 900004 Instruction Manual
Original-Gebrauchsanleitung
V1/1115
900004
GB/UK
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 28
1.1 Safety instructions ................................................................................................ 28
1.2 Key to symbols ..................................................................................................... 31
1.3 Proper use ............................................................................................................ 32
2. General information ................................................................................................ 33
2.1 Liability and Warrantees ....................................................................................... 33
2.2 Copyright protection ............................................................................................. 33
2.3 Declaration of conformity ...................................................................................... 33
3. Transport, packaging and storage......................................................................... 34
3.1 Delivery check ................................................................ ...................................... 34
3.2 Packaging ............................................................................................................. 34
3.3 Storage ................................................................................................................. 34
4. Technical data ......................................................................................................... 35
4.1 Overview of parts ................................................................................................. 35
4.2 Technical specification ......................................................................................... 36
5. Installation and operation ....................................................................................... 36
5.1 Installation ............................................................................................................ 36
5.2 Operation .............................................................................................................. 37
6. Cleaning and maintenance ..................................................................................... 40
6.1 Cleaning instructions ............................................................................................ 40
6.2 Cleaning and disinfection ..................................................................................... 41
6.2.1 Container emptying ................................................................................. 41
6.2.2 Container disassembly ........................................................................... 42
6.2.3 Removing of outlet tap ............................................................................ 43
6.2.4 Cleaning of the bowl ............................................................................... 44
6.2.5 Disassembly of outlet tap ........................................................................ 44
6.2.6 Cleaning and disinfection of parts ........................................................... 45
6.2.7 Reinstallation of cleaned parts ................................................................ 46
6.2.8 Disinfection of internal parts ................................................................... 48
6.2.9 Cleaning of drip tray ................................................................................ 48
6.2.10 Cleaning of container lid ......................................................................... 48
6.2.11 Emptying of water tank ........................................................................... 49
6.2.12 Cleaning and descaling of water tank. .................................................... 49
6.2.13 Maintenance ........................................................................................... 50
7. Possible Malfunctions ............................................................................................ 50
8. Waste disposal ........................................................................................................ 52
- 27 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
1.1 Safety instructions
All persons using or maintaining the device must follow the recommendations and instructions in this manual and safety instructions listed below.
The device must be operated only in perfect technical condition.
The power supply socket must be suitable for used plug and for values
on the rating plate.
The socket must be grounded. The socket must be connected to the
electric system fulfilling safety standards requirements valid in a given
country.
The supply cable must not contact or be immersed in water or other
liquids.
The supply cable must not touch the heat sources or sharp edges.
The supply cable should not hang from the table or other surface. Pay
attention to avoid stepping on or tripping by the cable.
- 28 -
The supply cable must not be bent, crushed, tangled, it must be
always completely unwound. Do not place the device or other objects
on the supply cable.
Do not place the supply cable on carpets or other flammable
materials. Do not cover the supply cable and place it away from work
areas.
Periodically inspect the electric supply cable for damages. Do not
operate the device with damaged supply cable. When the cable is
damaged it should be replaced by the service company or qualified
electrician in order to avoid hazards.
Never touch the supply cable with wet or moist hands.
Never use the supply cable for carrying, lifting, or moving the device.
The supply cable must be disconnected from the socket only by
pulling the plug.
In any case do not open the device housing. In case of electrical or
mechanical modifications the electric shock hazard will occur.
Remove the plug from its socket:
- when the device is not used,
- in case of anomalies during operation,
- before cleaning.
The maintenance and repair works must be performed only by the
qualified professionals with use of original spare parts and equipment.
Never attempt to repair the device by yourself!
Do not use the accessories and spare parts not recommended by the
manufacturer. They may be dangerous for the user and other people or
may damage the device, harm anyone, and cause loss of warranty
rights.
In order to avoid hazards and assure optimum performance it is
forbidden to make any replacements or modifications in the device,
not expressly approved by the manufacturer.
- 29 -
The housing and lid of the device become very hot during the
operation. Burn hazard! In order to avoid burns of fingers and hands
do not touch hot parts of the device! During operation touch only
handles and switches designed for such purpose.
Do not use the device near the heat sources (kitchen oven, gas flame,
etc.) and in expolsion hazard space, where flammable liquids or gases
are present. High temperature may cause their evaporation and due to
contact with the ignition sources the deflagration may occur, and in
result the injuries and damages. Assure free air circulation.
In case of fire before the fire extinguishing activities remove the plug
from the socket or disconnect the device from the power supply (pull
the plug!). Use approved fire extinguishers only. Note: Do not spray
the device with water when it is still connected to the power supply:
Electric shock hazard!
The device should be periodically completely emptied, cleaned, and
disinfected in order to eliminate the possibility of harmful microbial
growth.
The device must not be cleaned with use of petrol or any solvents.
Do not use any sharp objects or abrasive agents for cleaning the
surfaces.
Never wash the device or its elements in the dishwasher.
Do not use the device when the water tank is empty.
The device is not to be used by persons (also children) with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction.
Children must be continuously supervised in order to avoid playing
with the device.
Prevent access of children to the package materials like plastic bags
and foamed polystyrene elements. Suffocation hazard!
- 30 -
Never leave the operating device without supervision.
The device is not designed for operation with external timer switch
or remote control.
The device is designed for indoor use only.
1.2 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!
PROHIBITION
That symbol indicates activities which should not be realized as they are
dangerous for user and other persons.
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
- 31 -
1.3 Proper use
The operational safety of the device is assured only in case of proper use, according
to the operation manual.
All technical activities like installation and maintenance must be performed by the
qualified service personnel only.
The chocolate dispenser is not designed for continuous operation in industrial
applications.
The device is intended for home use or in similar places such as:
in kitchens for store or office employees or in similar business areas;
in agricultural farms;
by guests of hotels, motels and other typical places of accomodation;
in Bed and Breakfast facilities.
The chocolate dispenser is designed only for heating and maintaining temperature
of hot chocolate.
CAUTION!
Any use going beyond the intended purpose and/or any
different use of the device is forbidden and is not considered
as conventional.
Any claims against the manufacturer or his authorized
representative as a consequence of experiencing damages
resulting from unconventional use are impossible.
The operator is liable for all damages resulting from
inappropriate use.
- 32 -
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
- violation of advice concerning operation and cleaning;
- use other than designed;
- alterations made by user;
- use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
- 33 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
- Do not store outdoors.
- Keep it dry and dust-free.
- Do not expose it to aggressive media.
- Do not expose it to direct sunlight.
- Avoid mechanical shocks and vibration.
- In case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly.
If required refresh or renew.
- 34 -
Loading...