700 GN210 - 700 GN210
700903 - 700904
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Technical Support Hotline: +49 5258 971-197
www.bartscher.com
Version: 1.0
Date of preparation: 2023-11-16
EN
2
Original instruction manual
1 Safety ............................................................................................................ 2
1.1 Explanation of Signal Words .................................................................... 2
1.2 Safety instructions.................................................................................... 3
1.3 Intended Use ........................................................................................... 6
1.4 Unintended Use ....................................................................................... 6
2 General information ....................................................................................... 7
2.1 Liability and Warranty .............................................................................. 7
2.2 Copyright Protection ................................................................................ 7
2.3 Declaration of Conformity ........................................................................ 7
3 Transport, Packaging and Storage ................................................................ 8
3.1 Delivery Check ......................................................................................... 8
3.2 Packaging ................................................................................................ 8
3.3 Storage .................................................................................................... 8
4 Technical Data ............................................................................................... 9
4.1 Technical Specifications .......................................................................... 9
4.2 Functions of the Appliance ..................................................................... 11
4.3 List of Components of the Appliance ..................................................... 12
5 Installation and operation ............................................................................ 13
5.1 Installation .............................................................................................. 13
5.2 Operation ............................................................................................... 17
6 Cleaning and Maintenance .......................................................................... 24
6.1 Safety Instructions for Cleaning ............................................................. 24
6.2 Cleaning ................................................................................................. 24
6.3 Maintenance .......................................................................................... 25
7 Possible Malfunctions .................................................................................. 26
8 Disposal ....................................................................................................... 28
700903 1 / 28
Safety
EN
Read this instruction manual before using and keep it available
at all times!
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.
Diese Bedienungsanleitung beschreibt di e Installation, Bedienung und Wartung d es Geräts und gilt als wichtige Infor mationsquelle und Nachschlagewer k. Die Kenntnis aller enthaltenen Sicherh eitshinweise und Handlungsanweisu ngen schafft die Voraussetzung f ür das sichere und sachgerechte Ar beiten mit dem Gerät. Darüber hinaus müssen die für den Einsatzbereic h des Geräts geltenden örtlichen Unfall verhütungsvorschriften und allgemeine n Sicherheitsbestimmungen eingehalten werden. Diese Bedienungsanleitung is t Bestandteil des Produkts und muss in unmittelbarer Nähe des Geräts für das In¬stallations-, Bedienu ngs-, Wartungs- und Reinigungspers onal jederzeit zugänglich auf¬bewahrt werd en. Wenn das Gerät an eine dritt e Person
weitergegeben wird, muss die Bedienungsa nleitung mit ausgehändigt werden.
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
2 / 28 700903
Safety
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
, die
1.2 Safety instructions
Electrical Current
• Too high a mains voltage or incorrect installation may cause electric shock.
• The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
• To avoid short-circuit, the appliance should be kept dry.
• If there are malfunctions during operation, disconnect the appliance from the
power supply.
• Do not touch the appliance’s plug with wet hands.
• Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
• Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
• Do not transport the appliance, holding it by the power cord.
• Do not allow the power cord to come into contact with heat sources or sharp
edges.
• Do not bend, pinch nor knot the power cord.
700903 3 / 28
Safety
EN
• Always completely unwind the power cord.
• Never place the appliance or other objects on the power cord.
• Always take hold of the plug to disconnect the appliance from the power supply.
• Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Incorrect operation of the appliance ma y cause fire or explosion hazard due to igniti on of its content.
Fire hazard / flammable materials hazard / explosion hazard!
• Do not use any electric devices in the appliance.
• Do not store nor use petrol or other flammable liquids and gases in the vicinity of
this or any other appliance. Those gases may cause fire or explosion hazard.
• Do not put into the appliance any explosive materials, like sprays filled with
flammable propellants. Contents of containers filled with flammable gases and
liquids may leak in low temperatures, and the contents may catch fire from
sparks generated by an electric appliance. Explosion hazard!
• In the case of coolant leakage, pull the plug from the socket. Remove all
sources of ignition in the vicinity, ventilate room and contact technical service.
Avoid coolant getting in contact with eyes, as it may cause serious eye damage.
• Never use any flammable liquids for cleaning the appliance or its parts. Gases
released may cause fire or explosion hazard.
• In the case of fire, disconnect the appliance from the power supply before
attempting adequate fire-extinguishing actions.
• Never attempt to extinguish fire with water if the appliance is connected to the
power supply. Following extinction of fire, ensure sufficient fresh air inflow.
• Defrosting process may not be sped up with mechanical means or heat energy
sources (candles or heaters) nor with any other means. Vapour produced may
cause short-circuit and too high temperatures may damage the appliance.
• All ventilation slots should not be obstructed during operation.
• Never attempt to damage cooling installation of the appliance.
4 / 28 700903
Safety
EN
Operating Personnel
• The appliance may only be operated by qualified personnel and trained
specialist personnel.
• This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
• Children should be supervised to ensure that they are not playing with or
switching on the appliance.
Improper Use
• Unintended or prohibited use may cause damage to the appliance.
• The appliance may only be used when its technical condition is flawless and
allows for safe operation.
• The appliance may only be used when all connections are executed according
to rules of law in force.
• The appliance may only be used when it is clean.
• Use only original spare parts. Never attempt to repair the appliance on your own.
• Do not introduce any changes in the appliance nor modify it.
• Do not drill hole in the appliance nor install any objects on it.
• Do not place any heavy objects on the appliance.
700903 5 / 28
Safety
EN
1.3 Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
– cooling and storage of suitable beverages and foods (refrigerator)
– long-term storage of deep-frozen products (deep freezer)
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.
The following is an unintended use:
– Storing flammable or explosive objects and liquids, such as ether,
petroleum or adhesives;
– Storing explosive materials, like sprays filled with flammable propellants;
– Storing pharmaceutical products or preserved blood;
– Storing live pets.
6 / 28 700903
General information
EN
2 General information
2.1 Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
– failure to observe instructions,
– unintended use,
– technical alterations introduced by the user,
– usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
The warranty period for this appliance is 24 months, counted from the purchase
date.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.
700903 7 / 28
Transport, Packaging and Storage
EN
3 Transport, Packaging and Storage
3.1 Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
– in closed rooms;
– in dry and dust-free surrounding;
– away from aggressive agents;
– in a location protected against sunlight;
– in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.
8 / 28 700903
Technical Data
EN
4 Technical Data
4.1 Technical Specifications
Version / Characteristics 700903 – 700904
• Cooling: circulating air
• Insulation: pentane, 85 mm
• Temperature control:
– 700903 – in 0.1°C increments
– 700904 – in 1°C increments
• Control: electronic
• Automatic defrosting function
• Evaporation of condensed water
• Thermostat
• Digital display
• Door type: leaf door
• Right-hand side door, with the possibility for door hinge to be changed
• Type of shelves: grate, plastic-coated
• Height-adjustable shelves
• Appliance locked with a key
• Height-adjustable: 2.040–2.090 mm
• Features:
– LED lighting, switched on separately
– acoustic signal if door is left open for too long
More information on the appliance is available in our website www.bartscher.com
or, pursuant to the Regulation (EU) 2015/1094-IV, in our product data base at
https://energy-label.ec.europa.eu/. Enter article number for a given model.
700903 9 / 28
Technical Data
EN
Name:
Deep freezer 700 GN210
Art. No.:
700903
Material:
CNS 18/10
Inner material:
CNS 18/10
Volume, in l:
443
Temperature range, min.–max., in °C:
-18 - -22
Ambient temperature, max., in °C:
30
Coolant, amount in kg:
R290 / 0,125
Climate class:
4
Energy efficiency class:
B (EU Nr. 2015/1094-IV)
Energy consumption, in kWh/year:
1172
GWP index:
3
Number of doors:
1
Number of shelves:
4
Shelf dimensions (W x D), in mm:
534 x 650
Distance between guide rail pairs, in mm:
75
Connected load:
0,35 kW | 220-240 V | 50 Hz
Dimensions (W x D x H), in mm:
705 x 912 x 2.085
Weight, in kg:
151,0
We reserve the right to implement technical modifications.
10 / 28 700903
Technical Data
EN
Name:
Refrigerator 700 GN210
Art. No.:
700904
Material:
CNS 18/10
Inner material:
CNS 18/10
Volume, in l:
443
Temperature range, min.–max., in °C:
-2 - +8
Ambient temperature, max., in °C:
40
Coolant, amount in kg:
R600a / 0,105
Climate class:
5
Energy efficiency class:
A (EU Nr. 2015/1094-IV)
Energy consumption, in kWh/year:
321
GWP index:
3
Number of doors:
1
Number of shelves:
4
Shelf dimensions (W x D), in mm:
534 x 650
Distance between guide rail pairs in mm:
75
Connected load:
0,2 kW | 220-240 V | 50 Hz
Dimensions (W x D x H), in mm:
705 x 895 x 2.090
Weight, in kg:
146,4
We reserve the right to implement technical modifications.
4.2 Functions of the Appliance
The deep freezer can be used to cool and store suitable beverages and food
products at a set temperature.
Suitable food products can be frozen and stored for long periods in the deep
freezer.
With a capacity of 443 litres in GN 2/1 format, the refrigerator/deep freezer offers
maximum flexibility. An audible signal warns of a break in the cold chain if the door
is opened for too long.
700903 11 / 28
Technical Data
EN
Fig. 1
1. Electronics compartment
2. Digital temperature controller
3. Door lock
4. Door
5. Door seal
6. Height-adjustable feet (4 pcs)
7. Shelves (4 pcs)
8. Housing
9. Fan
10. LED lighting strip
4.3 List of Components of the Appliance
700903 / 700904
12 / 28 700903
Installation and operation
EN
CAUTION!
Incorrect installation, positioning, operation, maintenance or misuse of
the appliance may lead to personal injury or property damage.
Positioning and installation, as well as repairs may be performed by
authorised technical service only and in compliance with the applicable
national law.
NOTE!
The manufacturer disclaims all liability and provides no warranty for
damages, which may be attributed to non-observance of regulations or
incorrect installation.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
5 Installation and operation
5.1 Installation
Unpacking / Positioning
• Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
• If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
• Be careful not to damage the rating plate and warning labels fixed on the
appliance.
• Never place the appliance in humid or wet environment.
• Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
• The appliance should be placed on surfaces that are:
– even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
700903 13 / 28
Installation and operation
EN
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Nie należy umieszczać urządzenia w gorąc ym otoczeniu a ni w pobliżu materiałó w łatwopalnych.
• The appliance requires sufficient airflow f or proper operation. Assure a minimu m lateral clearance of the appliance of 10 c m.
• Die Öffnungen am Gerät niemals abdec ken oder blockieren.
• Do not place the appliance in direct sunlight or in the vicinity of heat sources
(cooker, radiator, heating devices, etc.). Heat sources may negatively affect
power consumption, and restrict functions of the appliance, too.
• The electric socket should be easil y accessible so it is possible to quickly disco nnect the power cord when necessar y. The electric socket should be easil y accessible so it is possible to quickly discon nect the power cord when necessar y. The electric socket should be easily accessi ble so it is possible to quickly discon nect the power cord when necessar y.
• Place the appliance so that sufficient air circulation is ensured. Do not block nor
cover ventilation openings in the rear wall of the appliance.
• Do not position the appliance in high humidity locations. Air relative humidity in
the place of installation should not exceed 55% for Art. No. 700903 and 40% for
Art. No. 700904. Excessive humidity may cause rust and negatively influence
the refrigerating efficiency of the device.
• The appliance should be installed only in rooms, in which ambient temperature
does not exceed 30 °C (700903) and 40 °C (700904).
• Nie należy umieszczać urządzenia w gorąc ym otoczeniu a ni w pobliżu m ateriałów łat wopalnych.
• The appliance requires sufficient airflow f or proper operation. Assure a minimu m lateral clearance of the appliance of 10 cm.
• Die Öffnungen am Gerät niemals abdec ken oder blockieren.
• In order to avoid damage to the compressor, do not tilt the appliance more than
45° when positioning or transporting it.
• The electric socket should be easil y accessible so it is possible to quickly discon nect the power cord when necessar y. The electric socket should be easil y accessible so it is possible to quickly discon nect the power cord when necessar y. The electric socket should be easily accessi ble so it is possible to quickly discon nect the power cord when necessar y.
• To install the appliance, perform the following steps:
– Remove the packaging of the appliance, except for the pallet.
– Lift the appliance with the lift truck and move it to the planned installation
location. Be careful not to damage the appliance. Control the stability in
order not to lose the balance of the appliance.
– Do not drag nor push the appliance, as it may fall down. This may also
cause the damage to external elements or feet.
– As soon as the appliance is in the planned installation location, remove
the pallet.
– Level the appliance by screwing in or out the height-adjustable feet.
– Remove the protective film from the appliance at the end.
• Leave at least 20 cm clearance from flammable walls and items.
14 / 28 700903
Installation and operation
EN
Changing the Hinge Side
• The door hinge may be changed from right to left, as needed.
• Engage at least one more person to change the deep freezer door's hinge side.
ATTENTION!
Do not place the appliance in horizontal position in order to change the
door's hinge side.
1. Perform the following steps in the order shown below:
700903 15 / 28
Installation and operation
EN
16 / 28 700903
Installation and operation
EN
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Prior to first use, the appliance should be installed and left standing upright for at
least 12 hours, before it is connected to power supply.
• After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 15 minutes.
5.2 Operation
Storing food in the refrigerator
For your appliance to operate the best way, follow the indications below:
• When inserting the food products, pay attention to free air circulation inside the
appliance.
• Food products or beverages should first be cooled to the suitable storage
temperature.
• If the food products are not cooled sufficiently prior to storing, the operating
efficiency of the appliance deteriorates and it may negatively influence the
cooled food products. Thus, avoid storing food products in rooms that are not
cool, for the cold might be lost when they are inserted in the refrigerator.
• The food products stored in the refrigerator should be packaged or covered.
• The food products with specific aromas, e.g.: fresh fish, foie gras, cheese,
should be stored in properly closed containers.
• Do not store bananas in the refrigerator because they are sensitive to low
temperatures.
700903 17 / 28
Installation and operation
EN
Freezing of food products in the deep freezer
• Deep-freeze only food products that are suitable to this end and withhold low
temperatures well.
• Deep-freeze only fresh food products.
• A suitable packaging should be selected for each food product and the product
should be packed well. The packaging must be air-tight and impervious to water,
as this could cause the frozen product to dry. Plastic films and bags should soft
and smooth, so that they stick to the contents well.
• Never freeze again any thawed or partially thawed products. Such products
should be processed and consumed within maximum of 24 hours.
• Observe proper indications of the manufacturers as to the freezing of given food
products.
• It is best to freeze products in small portions and thaw them one by one. This
caters for fast and uniform freezing and thawing. Frozen product should be
described with its name and the date of freezing.
• When freezing larger amounts of fresh food products, the temperature in the
appliance may rise temporarily. This does not affect the already stored food
products.
• Do not place bottles filled with liquids in the appliance. Freezing liquids increase
their volumes and may cause bottles to crack.
• Avoid opening of doors during the freezing process.
• Partially or fully thawed food products s hould be immediately used. Low temp erature preserves food products, but it does not eradicate micro-organisms. T hey reactivate at an accelerated pac e and food products turn rapidly. Parti al thawing reduces the nutritional val ue of food products, especiall y the nutritional value of fruits and vegetables, as well as ready-made meals.
• If the package is damaged or unnaturall y bulged, it is likely that the food product has been stored improperly and that it is spoiled.
• The power supply to the appliance shoul d never be interrupted for more than 10 minutes.
•d
Storage of deep-frozen food products in the deep freezer
• Observe instructions for storage of food products indicated on their packages. If
there are no indications, a food product should not remain in a frozen state for
more than 3 months from the purchase date.
• The packages of food products frozen in the process of their manufacturing
feature storage deadlines and temperatures. It is recommended to follow
manufacturer's indications for storage and usage.
• Select only properly packed food products, provided with full data and store
them in deep freezers in the temperature of -18°C or below.
• When buying deep-frozen food products, transport them in suitable containers to
avoid thawing and refreezing. As soon as possible, place such products in a
deep freezer.
• Do not buy icy products, as icing denotes that they have already been partially
thawed a couple of times.
• Protect food products against thawing and refreezing, as temperature rise
shortens their storage period and deteriorates their quality.
18 / 28 700903
Installation and operation
EN
• Partially or fully thawed food products should be immediately used. Low
temperature preserves food products, but it does not eradicate micro-organisms.
They reactivate at an accelerated pace and food products turn rapidly. Partial
thawing reduces the nutritional value of food products, especially the nutritional
value of fruits and vegetables, as well as ready-made meals.
• If the package is damaged or unnaturally bulged, it is likely that the food product
has been stored improperly and that it is spoiled.
Appliance Preparation
1. Prior to first operation, clean the appliance and its equipment observing
instructions in section 6 'Cleaning'.
2. Finally, dry the appliance and accessories thoroughly.
3. Introduce the shelves into the appliance at the selected height.
4. Close the appliance door.
5. Plug the appliance into a suitable single socket.
700903 19 / 28
Installation and operation
EN
1.
LED fan indicator
LED on: the fan is operating
LED blinks: delay after defrosting
2.
LED defrosting process indicator
LED on: defrosting in progress
LED blinks: dripping in progress
3.
LED compressor indicator
LED on: compressor off
LED blinks:
– setting the parameters of cooling mode in progress
– compressor fuse triggered
4.
Digital display
5.
LED energy-saving mode indicator
LED and digital display are on: the energy-saving mode is
activated
LED and digital display are off: the appliance is in a "Standby"
mode
Press the button to activate the display
6.
LED indicator of Celsius scale
LED on: the temperature measurement unit are degrees
Celsius
Functions of operating elements and displays
20 / 28 700903
Installation and operation
EN
7.
LED indicator of Fahrenheit scale
LED on: the temperature measurement unit are degrees
Fahrenheit
8.
LED ON/Standby indicator
LED on: the appliance is off (Standby)
9.
Setting value increase button — manual defrosting
10.
Setting value decrease button
11.
ON/OFF / Standby switch
12.
Programming Button
Digital Display
When the appliance is switched on through pressing the key and in standard
work mode, the digital display shows the temperature inside the appliance. This is
not the case for the defrosting process, when the digital display shows the 'dEF'
message.
When the appliance is in the 'sleep' mode, the LED indicator light is on.
Switching the Appliance ON/OFF
1. Switch the appliance on using the corresponding key on the digital
temperature controller.
2. Make sure that the digital temperature controller keys are not blocked and there
are no on-going processes (defrosting, cooling, etc.).
3. Press and hold the key for 4 seconds.
The LED control light flashes and the appliance switches to the Standby mode.
The LED control is on for as long as the appliance remains in this mode.
4. Again, press and hold the key for 4 seconds, to switch the appliance to the
ON mode.
Modification/Setting of the Set Temperature
1. Make sure that the keys are not blocked and there is no process in progress.
2. Press the key briefly.
700903 21 / 28
Installation and operation
EN
The LED indicator light blinks.
3. Within 15 seconds, press the or key briefly.
The digital display shows the parameters: r1 (min. temperature) and r2 (max.
temperature).
4. To confirm, press the key briefly or refrain from inputting any data for 15
seconds.
The LED indicator light goes off and the appliance completes the settings.
NOTE!
If additional parameter settings are necessary, contact technical service.
Key Locking/Unlocking
Key Locking:
1. Make sure, there is no process in progress.
2. Do not enter any data for 30 seconds: the 'Loc' message will be shown in the
digital display for 1 second and the keypad will be automatically locked.
When the keypad is locked, the following functions are not available:
– switching the appliance ON/OFF
– displaying the temperature measured by the probe
– activating the manual defrosting process
– setting the working temperature
If you attempt to introduce these settings, there will be the 'Loc' message shown on
the display for 1 second.
3. Unlock the keys before you attempt to introduce the data.
4. To unlock the buttons, press and hold one of the buttons for 2 seconds.
The 'UnL' message will be shown on the display for 1 second.
22 / 28 700903
Installation and operation
EN
Automatic Defrosting
By factory default setting, the appliance is set to execute the defrosting cycle every
6 hours.
The first defrosting cycle is commenced, when the appliance is switched on for the
first time.
The defrosting lasts for 20 minutes. The next defrosting cycle is commenced after 6
hours.
NOTE
The defrosting water evaporates automatically (container on the rear
panel).
Manual Defrosting Activation
1. Make sure that the keys are not blocked and there is no process in progress.
2. Press and hold the key for 5 seconds.
The defrosting is activated immediately.
The defrosting LED indicator light is lit and remains on as long as the defrosting
process lasts.
The next defrosting process is commenced after 6 hours.
LED Lighting / Fan / Acoustic Signal When Door Are Open For Longer
When the door is opened, the light switches on and fan stops.
When the door stays open for longer, an acoustic signal is heard soon.
700903 23 / 28
Cleaning and Maintenance
EN
6 Cleaning and Maintenance
6.1 Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
• Never use hot water to clean the appliance.
6.2 Cleaning
Cleaning Refrigerator 700904
1. Clean the appliance regularly.
2. Remove all food and beverages from the appliance and store them temporarily
in a cool room.
3. Remove grates from the appliance and clean them with warm water and a soft
cloth with neutral detergent. Rinse grates with fresh water.
4. Thoroughly wipe the external and internal surfaces of the device. Use warm
water, soft cloth and neutral cleaning agent for cleaning. Wipe surfaces with a
clean cloth.
5. Clean the door seal with a soft cloth soaked in warm water, without using
detergent.
6. Finally, thoroughly dry the cleaned surfaces and grates.
7. Place grates back into the appliance.
8. Regularly remove dust and fibres from the rear wall of the appliance with a soft
brush or dust brush.
24 / 28 700903
Cleaning and Maintenance
EN
Defrosting and Cleaning Deep Freezer 700903
ATTENTION!
Never damage the cooling circuit. Do not use pointed, sharp or any other
mechanical aids to accelerate defrosting.
Never use electrical appliances such as a hair dryer, heat blower, etc., or
an open flame to defrost the appliance.
1. During the defrosting process, wrap frozen products in several layers of paper
(e.g. newsprint paper) and store them in a cool place or in the refrigerator.
2. As the temperature of frozen products rises, it is best to use them up as soon as
possible, as the maximum freezing period is reduced by this procedure.
3. Defrost the ice coating in the appliance regularly (at least 2x per year).
4. To defrost the appliance completely, switch the power off (pull the plug out!) and
leave the door open until the ice has completely melted.
5. Place a suitable container to collect the defrosting water in the lower area of the
appliance.
6. Finally, clean the appliance according to instructions in section 'Refrigerator
700904 Cleaning', points 3–8.
If the appliance will not be used for an extended period of time:
– clean the appliance and dry it thoroughly,
– leave it open to prevent unpleasant odours from forming inside.
6.3 Maintenance
The following operations should be regularly performed by a qualified specialist:
– cleaning the condenser with suitable tools (vacuum cleaner or soft
brush);
– checking of electrical connections;
– checking of the thermostat and the sensor;
– checking of door and door seal.
700903 25 / 28
Possible Malfunctions
EN
Error
Possible Cause
Solution
No functions
available
Plug improperly inserted
into a socket
Remove the plug and insert it
properly into a socket
Electric power supply safety
fuse damaged
Check a fuse, connect the
appliance to another socket and
check it
No power supply
Check the electric power supply
Damaged socket
Plug the appliance into another
socket
Damaged plug/power cord
Contact the service company
Cooling efficiency
not
sufficient
Temperature set incorrectly
Correct the temperature setting
Direct sunlight or heat
sources in immediate
vicinity
Move the appliance away from
heat sources
Condenser obstructed with
dust
Clean the condenser
Door is not closed properly
or it has been opened for
too long
Close the door tightly; limit the
door opening time to minimum
Poor air circulation around
the appliance
Assure sufficient clearances
from walls or other objects
Ambient temperature too
high
Check the ambient temperature
at the installation site; if
necessary, install the unit in a
suitable location
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
26 / 28 700903
Possible Malfunctions
EN
Error
Possible Cause
Solution
Cooling efficiency
not
sufficient
Food products that are too
worm are placed in the
appliance
Always let hot dishes cool down
to room temperature first
Appliance is overfilled
Reduce amount of food
products in the appliance
Too little clearance between
objects inside the appliance
or too many objects in the
appliance
Provide for sufficient clearance
between objects inside the
appliance; remove the excess
of objects
The appliance is
loosing water
The appliance is poorly
levelled
Level
Clogged/blocked defrosting
water drainage pipe
Clean the defrosting water drain
pipe or remove the blocking
objects
Defrosting water container
is full
Empty the defrosting water
container
Appliance
generates loud
sounds
Appliance is not placed on
an even surface
Level the appliance
Loose nuts/screws
Check all screws and nuts,
tighten them if necessary
Appliance touches walls or
other objects
Maintain minimum clearances
from walls and other objects
The following sounds that are generated by the appliance during operation are a
normal phenomenon and do not indicate any malfunctions:
– Splashing, bubbling and hums are generated by the coolant that
circulates the system.
– Short, louder whirring/hooting or clicking sounds may be heard when the
compressor of the appliance starts.
700903 27 / 28
Disposal
EN
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
8 Disposal
Electrical Appliance
Electrical appliances should be returned to designated collection points.
Coolant
The propellant used in the appliance is flammable. It should be utilised pursuant to
national regulations in force.
28 / 28 700903
Loading...