700-400 | 700-800 | 700-1200
285200 - 285201 - 285203
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: +49 5258 971-0
Fax: +49 5258 971-120
Service hotline: +49 5258 971-197
www.bartscher.com
Version: 1.0
Date of preparation: 2024-01-29
Original Installation Instructions
EN
EN
Name:
Kitchen rail 700-400
Art. No.:
285200
Material:
stainless steel
Designed for:
Series 700
Device width, in mm:
400
Max. load-bearing capacity, in kg:
15
Depth of the surface for placing objects,
in mm:
75
Dimensions (W x D x H), in mm:
400 x 200 x 80
Weight, in kg:
3,1
2851121
Gas stove
2855061
Grill plate
287410
Electric kitchen
2855071
Grill plate
286102
Electric kitchen
2856211
Volcanic lava grill
286411
Induction kitchen
286917
Deep fryer
284804
Work element
2859171
Deep fryer
286301
Bain-marie
2859251
Deep fryer
286710
Multi pan
286628
Warm-keeping appliance
286506
Grill plate
286305
Pasta brewer
286507
Grill plate
2853051
Pasta brewer
Technical data
As an accessory, the kitchen rail 285200 fits the following appliances:
285200 3 / 8
EN
Name:
Kitchen rail 700-800
Art. No.:
285201
Material:
stainless steel
Designed for:
Series 700
Device width, in mm:
800
Max. load-bearing capacity, in kg:
15
Depth of the surface for placing objects,
in mm:
75
Dimensions (W x D x H), in mm:
800 x 200 x 80
Weight, in kg:
4,7
2851051
Gas stove
284007
Work element
2851241
Gas stove
286302
Bain-marie
2851271
Gas stove
286508
Grill plate
2851251
Gas stove
286509
Grill plate
287420
Electric kitchen
2855081
Grill plate
287431
Electric kitchen
2855051
Grill plate
286104
Electric kitchen
2856311
Volcanic lava grill
286225
Electric kitchen
286922
Deep fryer
286326
Electric kitchen
2859271
Deep fryer
286234W
Electric kitchen
286310
Pasta brewer
286421
Induction kitchen
2853101
Pasta brewer
As an accessory, the kitchen rail 285201 fits the following appliances:
4 / 8 285200
EN
Name:
Kitchen rail 700-1200
Art. No.:
285203
Material:
stainless steel
Designed for:
Series 700
Device width, in mm:
1200
Max. load-bearing capacity, in kg:
15
Depth of the surface for placing objects,
in mm:
75
Dimensions (W x D x H), in mm:
1200 x 200 x 80
Weight, in kg:
6,3
2851161
Gas stove
286106
Electric kitchen
2851361
Gas stove
286302
Electric kitchen
2851261
Gas stove
286508
Electric kitchen
2851371
Gas stove
We reserve the right to implement technical modifications.
As an accessory, the kitchen rail 285203 fits the following appliances:
Intended Use
Equipping the 700 series appliances with a kitchen rail is not only a stylish finishing
touch, but also offers optimization in terms of safety and functionality. Increasing
distance from an appliance effectively reduces the risk of burns from contact with
high-temperature zones. In addition, the sturdy design ensures that pots, pans and
plates can be stored comfortably.
285200 5 / 8
EN
Fig. 1
1. Rail–shelf
2. Template for drilling holes
3. Counter-bracket (2 pcs)
4. Steel flat bar, bent (2 pcs)
5. Hexagonal socket head screw, M6
x 30 mm (4 pcs)
6. Hexagonal socket head screw, M6
x 20 mm (4 pcs)
Scope of Delivery / Part Name
1. Unpack the kitchen rail and remove all packing materials pursuant to
environmental regulations.
2. Check completeness of delivery according to the list below:
NOTE!
Tools needed: 5 mm hex key
6 / 8 285200
EN
2. Drill the necessary holes in the
appliance.
3. To this end, put the supplied template
for drilling holes on the edges of the
appliance, moving from the outside,
and slide it until it stops.
4. Now, drill the holes (2 at the left-hand
side and 2 at the right-hand side) at
the locations indicated with the
template.
Fig. 2
5. Next, connect the flat bars from the
outside to the counter-bolts inside the
housing, using four short M6
hexagonal socket head screws.
Initially, tighten the screws only lightly to
make it easier to install and level the rail–
shelf.
Fig. 3
6. Then put the rail–shelf on the flat bars.
7. Screw the rail–shelf to the flat bars
with long M6 hexagonal socket head
screws.
Also, these screws should only be lightly
tightened at first.
Fig. 4
Assembly
1. In order to install a kitchen rail, for example, for a gas stove, you must first
remove the grates, burner cover, burners and cooking basin.
NOTE!
If it is not a gas stove, it is necessary to remove the cover.
285200 7 / 8
EN
8. Now level the rail–shelf.
The kitchen rail is properly installed when
it ends flush with the corners and top edge
of the housing.
9. Tighten all eight screws thoroughly.
Fig. 5
ATTENTION!
For cleaning, do not use any scouring agents containing solvents nor
corrosive cleaning agents. They may damage the surface.
Cleaning
1. Clean the kitchen rail regularly with warm water and a soft, damp cloth. Use a
mild cleaning agent when required.
2. Dry the kitchen rail with a soft cloth.
8 / 8 285200
Loading...