
GB/UK
Technical Data
Name Salad spinner
Code-No.: / ModelMaterial: Plastic, colour: orange
Design:
Water outlet: Drain hose: 1.6 m None
Capacity: 25 litres 12 litres
Dimensions: W 440 x D 440 x H 520 mm W 320 x D 320 x H 440 mm
Weight: 3.28 kg 2.15 kg
Subject to technical changes!
Operating and cleaning instructions
• Unpack the spinner and remove the packaging according to environmental
regulations.
• Before the first use, clean the salad spinner (external container, draining colander,
lid with a crank handle) with warm water and mild cleaning agent. Rinse with clean
water and then wipe dry the cleaned elements.
• Prepare and clean the salad thoroughly, then place it in the draining colander of
the salad spinner.
• Next, put the colander in the external container. Make sure it is tightly mounted on
the pin in the bottom of the external container.
• Place the lid on the external container and check whether it fits tightly on the
container, thus ensuring the connection between the draining colander of the
spinner and the lid.
120709 / K1-25L 120710 / K1-12L
Drive: crank handle
Features: draining colander, detachable
Food-safe, dishwasher-safe
Also suitable for drying vegetables
- 3 -

• Connect the drain hose to the water outlet in the bottom of the external container
(Code-No.: 120709) and lay the hose to the basin under the table to allow draining
of water during centrifuging.
• Next, install the crank handle on the lid and
turn it until the desired dryness is achieved.
• In case of the Code-No.: 120710 without water outlet, pour off water from the external
container after centrifuging.
• After use, thoroughly clean all the elements of the salad spinner with warm water and
mild cleaning agent. Rinse with clean water and then wipe dry all cleaned elements.
• Never use abrasive agents or bleach, because they may damage the surface of the
salad spinner.
Bartscher GmbH
Franz-Kleine-Str. 28
33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
- 4 -