Page 1
ANCHOR MASTER
28 Power, 70060
Telescope
to have a Phillips-head screwdriver and a
the top of the attached leg through the holes of the
mount. Make sure that the support tray brackets
are facing up.
4. Gently stand the scope and tripod, slowly spread the
legs of the tripod.
ttach
the 2 mounting rings to the optical tube with 4
mounting screws.
using 6 mounting screws
the
and levers.
the eyepiece.
slowly, until your view of the object is sharp and
in focus.
one or two drops of isopropyl alcohol to the cloth,
then wipe gently.
Washers and bolts 3 sets
10 pcs
2 pcs
**IMPORTANT**
TRY TO TAKE IT APART. DO NOT LOOK DIRECTLY AT THE
YOUR EYE.
1
6
4
3
7
5
2
2. Mahogany wood tripod with safety chain
3. Objective Lens
4. Eyepiece
5. Focus Knob
6.
Finder Scope
7. Image diagonal
Safety Chain
Acorn nuts 3 pcs
1 unit
Loading...