Owner's Manual
Version
Aluminum Prebuilt Fence
Installation Instructions
COMPLETELY BEFORE ASSEMBLING
YOUR FENCE.
ALL STATED SIZES ARE NOMINAL DIMENSIONS.
ALUMFENCEA_BOM V1 2/12
For Home, Haven, Select & Premier Series
Par Francis:
Par Espanol:
www.barretteoutdoorliving.com
2
Please read these instructions carefully before installing
your Barrette fence. If you have any questions or issues
installing the fence, please contact us at 1-800-336-2383
for assistance.
Before You Begin…
Check your local zoning laws.
• Local zoning laws and Home Owners Associations may
regulate the location, style and height of your fence or
even require a permit signoff beforehand.
Contact your local utilities companies.
• You must have the utility companies clearly mark
your property for electrical, gas or water lines to avoid
puncturing any unseen underground utilities.
ATTENTION:
Before you assemble the fence:
Line Post: Post with holes on two opposite
sides to connect fence sections.
Corner Post: Used to connect two sections
of fence coming together at 90°.
End Post: Used to end a line of fence. Only
one section of fence will connect to an end
post.
Blank Post: Has no holes, and is
used with a gate latch.
Heavy Duty Gate Post: Features a heavier wall
than all other posts to support the weight of
the gate (attached with hinges). Similar to an
end post, the HD Gate Post only has holes
on one side.
⁄⁄⁄
⁄
⁄
⁄
⁄
Panel
Height
Post
Height
Hole
Depth
Post
goes into
ground
⁄
⁄
⁄
⁄
⁄
(use
Gate
⁄
(use the
⁄
turn).
Loading...