Baron SHORTY KICKSTAND User Manual

Shorty Side Stand For Lowered Motorcycles

Page: 1BA-8520-00

Revision: 1.5 - 02/23/2010

These shortened side stands are for lowered motorcycles only Installation on a

standard-height bike may result in an unstable condition!

INSTRUCTIONS:
Road Star/Warrior installation:

1. Place motorcycle on a suitable stand and ensure it is secure.

2. Remove nut from top of side stand pivot bolt.

3. Remove pivot bolt and spring.

4. Clean and grease pivot area.

5. Install new side stand with stock bolt and supplied special washer. The flat" of the washer will contact the
safety switch when stand is down.

6. Reinstall the spring.

Our install guides provide a basic outline on the proper installation of our products. Further tuning and/or

fitment may be required. Barons bears no responsibility on installation costs associated with this product.

© 2013 Barons Custom Accessories

5221 Oceanus Drive Huntington Beach, CA 92649 [phone] - Ph. [phone] - Fax www.baronscustom.com [e-mail]