CAUTION! We Strongly recommend that a qualified
understand the instructions prior to the install.
BA-7800-xx – CHROME AXLE NUT COVERS
INCLUDED IN THE KIT:
(2) Axle Nut Covers, chrome (4) M6x10 set screws
(1) Honda bolt kit
INSTRUCTIONS:
technician install this kit if you do not completely
1. Slide your new Baron Axle Nut Covers into position on the bottom of
each front fork leg until seated.
2. Rotate as needed for best cov er ag e. A cut out has bee n prov i ded for
speedometer drive cable clearance on models so equipped.
3. Tighten (2) set screws to secure.
4. Honda models require our included BA-7800-01, Bolt Kit to replace
stock pinch bolts (2 per fork leg).
Our install guides provide a basic outline on the proper installation of our products. Further tuning
and/or fitment may be required. Baron bears no responsibility on installation costs associated with this
product.
© 2009 Baron Custom Accessories
Revision 5.0 (6/17/2009)
7401 Slater Ave. ● Huntington Beach, CA 92647● (760) 731-1200 – Ph. ● (760) 731-1284 – Fax ● www.baronscustom.com ● tech@baronscustom.com