Barnett Engineering RX150 User Manual

c

c

RX150

Manual Includes the Following:

Safety Guidelines
Assembly Guides Warranty Information

Trouble Shooting Care and Maintenance

General Information

Manual In

Manual In

2

ongratulations! You are now the proud owner of a quality

C

C

Barnett crossbow.

Please follow all safety, assembly and trouble shooting instructions
contained in the manual. It is extremely important to read and
follow the instructions before attempting to use your crossbow.
Serious injuries to yourself or others, damage to your crossbow or
poor performance from your crossbow could result from failure to
thoroughly read and understand these instructions. If any part of
this manual is unclear to you contact the service department at
800-237-4507. After assembly of your crossbow, please keep
manual for future reference.

As with any other high performance equipment, meticulous care
and a regular maintenance schedule must be maintained.

Manual Contents

Safety Guidelines
Parts Checklist 4 5
Specifications 5
Parts List (all Components) 6
Parts Picture 6
Assembly 7-9
Crossbow Operation 10-11
Trouble Shooting 12-13
Care and Maintenance 14
Warranty 15
Warranty Registration 16

3

Safety Guidelines

For: RX150

The RX150 is equipped with an automatic safety, which engages every time the
crossbow is cocked. The safety must be released before each shot. This, as with
any other mechanical device does not guarantee total safety, as no safety device
is a substitute for common sense and safe handling. NEVER pull the trigger on a
crossbow when the safety is in the “safe” position or anywhere between “safe”
and “fire”. Do not attempt to alter or modify the trigger mechanism, doing so
will void your warranty and may cause personal injury to yourself or others.

The following rules should be followed at all times: EXTREME CAUTION
SHOULD BE USED AT ALL TIMES WHEN HANDLING A
CROSSBOW. FAILURE TO FOLLOW THESE RULES COULD
RESULT IN SERIOUS INJURY OR DEATH.

! Always keep your fingers below the flight track and out of the path

of the strings when firing the crossbow.

! Never dry-fire the crossbow (shoot without an arrow). Dry firing

will void the warranty and result in damage to the limb, cable and

string, possibly causing personal injury.

! Never fire the crossbow until you are sure of your target.
! Always use an adequate target and backstop when target shooting.
! Always use suitable crossbow arrows, such as Barnett's 16" 2117

or 2216 Aluminum Crossbow Arrows. Arrows of improper
stiffness or mass weight may damage the limb and cable assembly,
voiding the warranty and possibly cause personal injury.

! Always inspect the crossbow and arrows before firing. Bent or

damaged arrows are not safe to fire and should be discarded or
repaired.

4

SPECIFICATIONS

RX150

If you are missing any of the above parts or need information on
older models, contact the Barnett Service department at 1-800-237-

4507.

Feet Per Second
Power Stroke
Draw Weight
Physical Weight
Width
Length
String Length
Number of Strands
String Stock #

PARTS LIST FOR RX150

QUANTITY

1 Pressure Plate
1 Nose Bolt
1 3mm Hex Nut
1 String
1 Cable Stringer
1 Adjustable Rear Blade Sight
1 Fixed Front Sight
1 Foot Stirrup
1 Lubewax
1 Stock Extender

PART NAME

5

220
16”
150
4

25.6

32.5

25.6
32
16024