RHINO CRANK COCKING DEVICE
ASSEMBLY AND OPERATING INSTRUCTIONS
1. Remove the butt plate on the rear
stock of your Rhino by removing the two
Phillips head screws.
2. Insert Rhino Crank Device unit on the
rear stock of Rhino. Attach unit with the
two new screws included with the crank
device shown in figure 1.
1. To cock your crossbow using
the Rhino Crank Device, first
release the safety latch (on the
crank). Then pull the hooks until
they reach the groove directly
behind and below the scope-
mounting bracket.
2. Place the rope into the groove.
See Figure 2. Continue pulling the
hooks down and attach to string
keeping hooks tight to flight track
Reengage Crank safety. See
Fig
ure 3
→
.
--------------------------------------------------------------------------------------------
Warranty Registration on opposite side
Figure 1
Operation
3. Slowly crank the handle so that it moves in
a forward rotation see figure 4. The crossbow
safety will engage when crossbow is cocked.
4. During shooting we recommend pulling
Figure 2
Figure 3
the string hooks and rope backward off the
crossbow and letting them hang fully
extended below the back of the stock, or wind
the rope and hooks back in. The crank handle
can be rotated some to provide a comfortable
shooting position
crossbow with the Crank Cocking Device
hooks still fixed on the string. This may
cause severe damage to your bow or personal
injury.
Barnett International Inc.
Figure 4
.
DO NOT FIRE your
*** DO NOT TURN THE HANDLE BACKWARDS WHILE DRAWING THE BOW! THIS WILL
DAMAGE THE ROPE***
The latch mechanism should always be engaged when cocking the crossbow. An audible clicking sound should be
present while turning the handle in a forward rotation. If this clicking sound is not present, pull latch release down to
engage. If the clicking sound is still not present, improper installation may have occurred. Re-check installation and
contact the Barnett Service Department at 1-800-237-4507.
Note: The Crank Cocking Device cannot be turned in reverse while the latching mechanism is engaged. Once the
crossbow is cocked, the latch must be disengaged so that the string hooks can be removed from the string. Always
leave the latch mechanism engaged when the crossbow is not in use.
Uncocking the Crossbow
Do not uncock the crossbow with the Crank Cocking Device. This could cause injury and damage to your crossbow.
The best way to uncock a crossbow with a Crank Cocking Device attached is to shoot an arrow into the ground. You
may want to keep an old arrow in your quiver at all times for this purpose.
BARNETT INTERNATIONAL INC.
LIMITED WARRANTY
The Crank Cocking Device is guaranteed to the original purchaser to be free of manufacturing defects for a period of one year
from date of purchase. Our liability extends to parts, labor and return transportation to consumer.
NOT COVERED ARE: Ropes, transportation of defective product to our Service Dept., damage caused by abuse, modification
or failure to perform normal maintenance, any other expense, consequential damages, incidental damages or incidental expenses
including damage to property or person.
Warranty registration card (attached) must be mailed within 10 days of purchase to validate the warranty.
HOW TO OBTAIN SERVICE: DO NOT return the unit to the dealer. Dealers are not authorized to make exchanges,
replacements or refunds on our behalf. Attach to the product our name, address, telephone number and letter describing the
problem. Carefully package and return the product, transportation charges prepaid to: Barnett International Inc. Service Dept.,
13447 Byrd Drive, Odessa, FL 33556. Mark the package in large print “Service Return”.
There are no other warranties expressed or implied. This warranty gives you specific legal rights and you may also have other
rights, which vary from state to state.
Cut Out and Mail Immediately
Barnett International Inc., PO Box 934, Odessa, FL 33556
CRANK COCKING DEVICE WARRANTY CARD
NAME:_____________________________________________________________AGE_______________
ADDRESS:___________________________________________________________________________________
CITY:_______________________________STATE___________________ZIP____________________________+
DATE OF PURCHASE_________________________-PHONE_________________________________________
DEALER_____________________________________PRICE PAID_____________________________________
DEALER ADDRESS:___________________________________________________________________________
TYPE OF STORE: GUN SHOP ( ) DEPT. STORE ( ) SPORT STORE ( ) MAIL ORDER ( ) OTHER ( )
PLEASE SPECIFY______________________
REGISTRATION NO. _______________________________