Barnant 50001-92, 704-3440 INSTRUCTION SHEET

Barnant Company

INSTRUCTION SHEET

Mixer Support Stand 50001-92 704-3440

1. Carefully unpack parts for Support Stand from the carton. Parts shipped in carton are the
Base and one Support Rod and one package of Hardware and Rubber Feet.

2. Assemble the Rubber Feet to the bottom of the Base with the supplied Hardware per the
diagram below.

3. Screw the Support Rod into one of three threaded holes in the Support Base and tighten
jam nut against Base. Additional Support Rods can be ordered (see below) to permit
mounting of additional Mixer Heads on a single Base.

4. Attach Mixer Head to the Support Stand with Double (Rod) Clamp (not included, order
separately from your dealer, part No. 08047-20) and place Support Stand around the
vessel containing material to be mixed.

CAUTION: Always center Mixer Heads within the arc of the Support Base to eliminate

the possibility of the Stand tipping over.

5. Install mixing shaft with the appropriate propeller to Mixer Head.

6. Adjust Mixer head for proper position of the propeller in material to be mixed and securely
tighten all adjustment screws and knobs.

CAUTION: To prevent the possibility of the mixing shaft or propeller coming in contact

with the vessel, or splashing contents, never adjust Mixer Head position
while running.

REPLACEMENT PARTS

B-2993-0001
ROD (1)

Extra Support Rod/Jam Nut 50001-94
Rubber Foot (1) A-3890
Jam Nut (1) B-1080-0053

E-1789-0123

BASE (1)

B-1081-0015

(4)

B-1079-0025
(4)

B-1080-0053
NUT (1)

A-3890

(4)

A-1299-0443

Edition 04

072403

Barnant Company y 28W092 Commercial Avenue y Barrington, IL 60010

847-381-7050 (Local) y 800-637-3739 y 847-381-7053 (Fax) y www.barnant.com