Bardac OPTIDRIVE E2 Sales Brochure

OPTIDRIVE E2

Industrial AC Drives up to 15HP
IP20 and NEMA 12 Options
Single & 3-phase motor versions

Bardac

drive technology

THE NEW E2
Expandable
Easy
Economical
Enduring

Efcient

OPTIDRIVE E2

A general purpose drive with all purpose features

Basic or NEMA 12 (IP55)

Basic or full featured systems drive
Basic or peer-to-peer networking over Ethernet

Basic or loaded, the new E2 is designed to give you the very best
in value, performance and ease of use. The innovative design
incorporates exibility, expandability and convenience that will
work in many different applications throughout your plant.

The basic concept is simple and easy but you have all the options
you will need to enhance the drive to a full featured, integrated
systems drive.

THE BASICS

Compact packaging
Simple mechanical and electrical installation
50°C ambient rating
150% rating for 60 seconds, 175% for 2 seconds
Simple 14 parameter basic set up
Integral RFI lter option
Integral brake transistor, sizes 2 & 3 (100% continuous rated)
ModbusRTU serial port
Remote keypad and display option
OPTISTICK plug in unit for fast up/down load of parameters

SPECIFICATION
Output Frequency 0 to 500Hz
Supply options Frequency 48 - 62 Hz
Voltage/Phases 100 - 132 volts max, single phase (0.5 - 1.5HP)
180 - 264 volts max, 1-phase (0.5 - 3HP)
180 - 264 volts max, 3-phase (0.5 - 5HP)
342 - 528 volts max, 3-phase (1 - 15HP)
Environment Temperature Operating, -10 to 50°C max, storage, -40 to 60°C
Altitude 0-2000M, derate 1% per 100M above 1000M
Humidity up to 95%, non condensing
Ingress Protection Basic IP20, Optional IP55 (NEMA12)
Control Mode Voltage vector
PWM frequency 4 to 32KHz (effective)
V/Hz ratio Linear
Boost Yes
Stop modes Coast / ramp / DC brake
Skip frequency One point, adjustable frequency band
Setpoint reference 0-10VDC, 4-20mA, 20-4mA, 0-20mA, Keypad, Modbus
Preset speeds 8
PI control Direct & analog input trim
Spin start Starts safely into rotating motor
Accel/Decel 0 - 600 seconds + Ramp stop decel 0 - 600 seconds
Congurable i/o Input 1 Programmable digital input
Input 2 Programmable digital input
Input 3 Congurable analog or digital input
Input 4 Congurable analog or digital input
Output 1 Congurable analog or digital output
Output 2 Normally open relay contact 30VDC 5A, 250VAC 6A
Protection Drive trip Over/under volts, over current, external trip,
Motor Overload, over temperature, short circuit, ground fault
Trip memory Last 4 trips stored