Barco R9842364 User Manual

Page 1
MEDIA &EVENTS
SDI — HD-SDI INPUT MODULE
R9842364
INSTALLATION MANUAL
For Solaris
30012004 R5976727/00
Page 2
Barco nv Media Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.89.70 Fax: +32 56.36.88.24 E-mail: media@barco.com Visit us at the web: www.barco.com
Barco nv Events
laan 5, B-8520 Kuurne
Noord Phone: +32 56.36.89.70 Fax: +32 56.36.88.24
events@barco.com
E-mail: Visit us at the web: www.barco.com
Printed in Belgium
Page 3
1. INSTALLATION PROCEDURE
Before starting the installation p ro cedure, switch off the Solaris LC40 an d unplug from the wall outlet.
For a fully implementation, Solaris LC40 must b e equipped with softw a re version 1.08 or higher.
1.1 Removing the actual module or dummy
How to remove
1. Turn out both fixing screws holding the actual installed module or the dummy cover. (image 1-1)
2. Slide out the actual installed module or take away the dummy cover.
1. Installation procedure
2 screws
Image 1-1
1.2 Inserting a new module
How to insert
1. Slide the module into the slot. Insure the module is seated correctly in the guide grooves.
2. Press on both handles of the input module until the module plug seats in the connector of the Solaris LC40.
3. Secure the input module by turning in both removed screws.
4. Reconnect to the wall outlet and start up the Solaris LC40.
R5976727 SDI — HD-SDI INPUT MODULE 30012004 1
Page 4
1. Installation procedure
1.3 Specifications overview
Specifications
SDI/HDSD I
Image 1-2 HD-SDI input module
SDI/HD-SDI input 1: BNC
SDI/HD-SDI input 2: BNC
Auto input detection between input 1 and input 2
SDI/HD-SDI output : BNC (= loop through)
Typical : 0.8 V
75 terminated
Output impedance : 75
pp
To select the HD-SDI in put module and to configure the priority setting, consult the owner’s manual of the Solaris LC40.
1
INPUT
INPUT
OUT
2
2 R5976727 SDI — HD-SDI INPUT MODULE 30012004
Loading...