Page 1
ImagePRO-II is an advanced high performance all-in-one video scaler, scan converter,
switcher and transcoder converting any input signal format to any output format. ImagePRO-
II supports universal analog, DVI single and dual link, HDMI, DisplayPort and SD/HD/3G SDI
signal formats. Loop-through outputs are provided for the analog, DVI, SDI input and genlock
signals. With features like HDCP and EDID management, USB backup and restore, multiple
video effects and a web page user interface, ImagePRO-II is the most advanced and flexible
signal processor in the market.
ImagePRO-II is offered in five models: standard, dual output, audio, dual output and audio
and Jr. The standard model offers all of the advanced features you need and expect to
find in ImagePRO. In addition to the standard features, the dual output model can convert
independently one input signal to two separate outputs at different resolutions. Furthermore,
the dual output model offers stereoscopic 3D conversion capability. The audio option allows
for a wide range of dis-embedding and embedding options between the HDMI, DisplayPort
and SDI signals and the analog and digital AES signals available on the DB-25 connector
of the audio board. ImagePRO-II can be fitted with either or both dual and audio options
simultaneously.
Available models
• R9004677: ImagePRO-II
• R9004683: ImagePRO-II with dual output
• R9004684: ImagePRO-II dual output upgrade kit
• R9004666: ImagePRO-II with audio
• R9004667: ImagePRO-II audio upgrade kit
• R767423K: ImagePRO-II audio breakout cable
• R9004668: ImagePRO-II with dual output and audio
• R9004695: ImagePRO-II Jr
Why ImagePRO-II?
• Best-in-class scaling
• Low latency
• Best ROI for your rental inventory
• Fastest source acquisition
• Familiar user interface
• Roadworthy design
• Proven history of performance
Features you’ll love
• Resolutions up to 2,560 x 1,600
• Supports DVI, 3G-SDI, HDMI,
DisplayPort and analog interfaces
• User-friendly LED setup
• Control via integrated web server
• USB backup and control
• 12-bit processing
• SDI level A to/from level B conversion
• Dual outputs
• Stereoscopic 3D conversions
• Audio embedding and de-embedding
ImagePRO-II
All-in-one video scaler, scan converter and switcher
Page 2
Professional connections, professional signals
VFD screen
Display menus and
messages
AC power
Ethernet
Connect to web interface or
external controller via the
etherCON ruggedized
lockable RJ45 connector
Rear panel
protective
metal bracket
SEL and ESC buttons
Select an item, answer
a query or exit a menu
Adjust knob
Navigate
through menus
USB port
Connect a flash drive to back
up and restore logos and
system configurations and
upgrade firmware
Field replaceable DVI connectors
As the ImagePRO-II is built for the live event industry, it has been designed
with the road in mind. With features like field replaceable DVI connectors
it supports the demanding environment of any live event. In order to keep
you up and running at all times, you can easily replace the DVI connectors
on your device.
ImagePRO
has been an
important part
of our business.
Hubertus Beckmann, LANG AG
Page 3
HDMI input 3G/HD/SD/SDI
output
Dual output
mezzanine connectors
SD/HD/3G/SDI input
with loop-through
Universal analog
input with
loop-through
Connect to analog
computer and video
sources
Dual link
DVI-I input with
loop-through
Input buttons
Select an input,
active inputs are backlit
Effects buttons
Transition to logo or black,
or freeze an image
Quick menu access
Open the setup, test pattern
or zoom/pan menus
DisplayPort input Universal
analog output
Dual link
DVI-D output
DisplayPort output
Composite
output
Connect to NTSC/
PAL composite
video display
Genlock with
loop-through
Connect a reference
signal such as
black burst or
composite sync
HDMI output
The best
just got better.
Adam Benjamin, Vice President PRG Video
Audio mezzanine
Page 4
Endless scaling and switching possibilities
Higher resolutions and the latest signal interfaces with EDID and HDCP support
Quick LED setup
The new Area of Interest (AOI) feature
makes setting up your LED display easier
than ever. Input sizing is quick and easy
with instant selections like 1:1 to match
the input pixel for pixel. The AOI feature
allows you to center cut your source and
fill the display horizontally and/or vertically. The zoom settings in the LED setup
menu provide custom scaling settings for
pixel perfect sizing. ImagePRO-II also outputs a single pixel raster box indicating
the size and position of the AOI window.
3G SDI
480i 2,048 x 1,080 1,920 x 1,200 2,560 x 1,600
single link dual link
SDI BarcoLink
Analog
HDMI
DVI
DisplayPort
Custom resolutions
By duplicating and editing an existing video format, you can easily create your own
custom video timings for both input and output sources. The ImagePRO-II can store up
to 32 custom resolutions. Since these are available in the EDID table, you can request
these custom resolutions from your computer connected to ImagePRO-II.
Automatic output configuration
Thanks to the DisplaySense technology, ImagePRO-II automatically sets its output format
to match the display’s native resolution. When more than one display is connected to
ImagePRO-II, users can select which device determines the output format. As display
formats are constantly changing, ImagePRO-II guarantees the best resolution for the
best image quality.
Built-in video effects
The ImagePRO-II is able to apply video effects on its output, including color correction,
invert, monochrome, flip, strobe or mask.
1,920 X 1,080
2,560 X 1,600
invert monochrome flip
Native LED
384 x 240
Source resolution
1,920 x 1,080
DisplayPort/HDMI/
3G HD SDI
Digitizer input
1,024 x 768
LED screen link 1,024 x 768
DVI
LED image processor
Page 5
Level A to/from level B SDI conversion and minimum delay
mode
ImagePRO-II converts level A SDI signals to level B and vice versa allowing cameras
and monitors that support only these formats to be connected to other devices. In both
applications the latency can be reduced to three lines by enabling the minimum delay
mode. In minimum delay mode, internal scaling is disabled and the output resolution
matches the input resolution.
Live events without ImagePRO
would be tough. It’s the
workhorse for the
industry, with perfect
performance and an attractive ROI.
Georg Rössler, CT Germany
Remote control via web browser
An integrated web page server provides remote control to configure and switch the
ImagePRO-II. This powerful integrated web interface also enables system diagnostics,
import and export of png logo files and firmware upgrades.
USB backup, restore and upgrade
Via a USB flash drive you can back up settings, logos and even upgrade your firmware.
When you need to copy settings from one system to another, you can simply copy the
configuration to the USB drive and move it to the next unit for a quick and easy duplicate of the first unit’s settings. In this way, multiple units can be set up and configured
in just a few minutes.
Online software management
When connected to the Internet, ImagePRO-II can check for the latest software release.
If necessary, it will download and upgrade its firmware automatically, keeping your
unit’s functionality up to date.
Multiple unit control
Multiple ImagePRO-II units can be controlled via a web browser, without installing a
separate control application. After discovery and setup, one or more units can be enabled to accept source changes or transitions.
Simple setup and advanced control
Page 6
LED application with ImagePRO-II dual
S3D conversions with ImagePRO-II dual
ImagePRO-II dual supports converting stereoscopic 3D (S3D) sources to alternate S3D signal formats for single
or dual stream stereoscopic S3D inputs and outputs. Multiple output connectors can be active at the same
time, depending on the selected 3D output format and resolution. S3D sync input and output support is
provided by two miniDIN-3 connectors per VESA 3D specification.
1,280 x 1,024 1,280 x 1,024
LED 1 LED 2
2,048 x 1,080
Dual output model
The optional dual output card turns your ImagePRO-II into an even more powerful tool.
By providing an additional scaled output, the same input can be routed to two separate
outputs doubling the output capability of your ImagePRO-II, as illustrated below. The
dual output mezzanine includes three additional HD/3G SDI connectors supporting the
input, loop and output signals. Each output can be configured independently to its own
resolution, frame rate, AOI, effects or pan and zoom.
* Any valid combination of formats and resolutions is allowed to fit the specific
application requirements
INPUT
• Side-by-side horizontal
• Left and right
• Top and bottom
OUTPUT
• Side-by-side horizontal
• Left and right
• Top and bottom
HDMI output*
1,920 x 1,080p
SDI output*
NTSC (480i) or
PAL (575i)
Page 7
The ImagePRO-II audio model includes the audio mezzanine board offering users a wide
range of options when dealing with embedded audio. The mezzanine board includes a DB25 connector providing I/O interface to 4 analog and 8 AES digital channels. Users can select
to associate the input video source with its own embedded audio signal or with the analog
or AES digital signal from the DB-25 connector. The de-embedded HDMI, DisplayPort and
SDI input audio signals can also be selected to appear on the discrete analog or digital AES
outputs. A custom audio breakout cable provides access to the analog and digital AES signals
on the DB-25 connector through 4 XLR and 8 BNC connectors.
Breakout audio cable signals:
• 2 analog in(a single stereo pair) on two XLRs
• 2 analog out (a single stereo pair) on two XLRs
• 8 AES in (four stereo pairs) on four BNCs
• 8 AES out (four stereo pairs) on four BNCs
Audio specifications
• LPCM only, no compressed audio
• No. of supported channels : SDI, HDMI and DisplayPort: 8 (max) @ 48/96 KHz sampling
• Supported bit depths: HDMI & DisplayPort: 16/20/24 bits, SDI: 20/24 bits
• Analog audio (2 channels of balanced audio inputs, each on 3 pins, frequency
Response: +-0.5dB, 20Hz to 20KHz, SNR: 90dB, THD + noise: -70dB @ -1dBFS, CMR:
75dB @ 60Hz, crosstalk: -90dB @ 1KHz, input impedance: 10K)
• Digital audio- AES3 (4 pair of AES/EBU digital audio inputs, each pair on 2 pins, groups
of 2 pairs, connector: 75 ohms, unbalanced inputs, bit depth: 20/24 bits)
Audio model
How to connect your ImagePRO-II
DUAL LINK DVI SINGLE LINK DVI
4:3
1,080p
NTSC
720p
3G SDI HDTV
PAL HDSDI
UXGA
HDMI
DISPLAY PORT
1,080i
DVI
COMPOSITE
2K WUXGA
VGA
SXGA
RGBHV
WSXGA+
SXGA+ WXGA
S-VIDEO
DEEP COLOR
16:9
WQXGA
XGA
COMPONENT
16:10
QXGA
DVI HDMI
HDMI out
Analog
Analog out
DisplayPort
Anything
IN
Anything
OUT
DVI/Display-
Port out
Genlock
House sync
3G-SDI
3G-SDI out
ImagePRO-II Jr
The ImagePRO-II Jr brings the high-performance scaling of the ImagePRO-II in an affordable
package. By providing a simplified input interface structure this cost-effective model is perfect for general applications.
INPUTS
• Single link DVI-I with loop out
• Universal analog with loop out
• 3G SDI (BarcoLink compatible)
• Genlock with loop out
OUTPUTS
• DVI-D
• Universal analog
• 3G SDI (BarcoLink compatible)
RESOLUTION
• Maximum input 2,048 x 1,200 @60Hz
• Maximum output 2,048 x 1,200 @60Hz
Page 8
M00460-R06-0114-PB January 2014
Any item contained in this datasheet may change without notice.
www.barco.com
VIDEO INPUTS
Input 1: DVI-I
• Digital formats; all single-link DVI digital formats up to 165 Mhz, per DVI 1.0 specification and all dual-link DVI
formats up to 330 Mhz; max H active: 4096, max V active: 3072
• Analog formats: NTSC/PAL composite and Y/C video, SD YPbPR with bi-level sync, HD YPbPr with tri-level sync,
RGBHV/RGBS/RGsB computer video with bi-level sync
• Analog sampling: sources with pixel rates up to 170 Mhz are sampled 1:1; sources with pixel rates above 170 Mhz
are filtered and sampled at 170 Mhz, including but not limited to 1,920 x 1,200p, 2,048 x 1,080p
• Active loop-through output of all input signals, including HDCP and EDID
• EDID version 1.3 compatible - HDCP version 1.4 compatible
Input 2: HD-15 VGA
• Format: NTSC/PAL composite and Y/C video SD YPbPr with bi-level sync, HD YPbPr with tri-level sync per SMPTE 274,
RGBHV/RGBS/RGsB computer video with bi-level sync
• Sampling: sources with pixel rates up to 170 Mhz are sampled 1:1; sources with pixel rates above 170 Mhz are
filtered and sampled at 170 Mhz, including but not limited to: 1,920 x 1,200p, 2,048 x 1,080p
• Active loop-through output of all input signals
• EDID version 1.3 compatible
Input 3: HDMI (type A)
• Formats: RGB and YCbCr; resolutions up to 2,048 x 1,080p @ 60 Hz per HDMI 1.4 specification and
1,920 x 1,200p @ 60 Hz
• EDID version 1.3 compatible - HDCP version 1.4 compatible
• Deep color (30/36 bits)
Input 4: DisplayPort
• Formats: resolutions up to 2,560 x 1,600 @ 60Hz (30 bits) per DisplayPort 1.1a specification
• HDCP version 1.4 compatible
Input 5 & 6 (dual model):
SD/HD/3G SDI on BNC
•
Formats: SD-SDI per SMPTE 259M-C (NTSC/PAL resolution); HD-SDI per SMPTE 292M, 296M; 3G-SDI per SMPTE 424
• Re-clocked loop-through output
• Dual link HDSDI per SMPTE 372 (dual output option)
VIDEO OUTPUTS
SD/HD/3G & BarcoLink SDI
(two outputs on the dual model)
•
Formats: SD-SDI per SMPTE 259M-C (NTSC/PAL resolution); HD-SDI per SMPTE 292M, 296M; 3G-SDI per SMPTE 424
• Dual link HDSDI per SMPTE 372 (dual output option)
NTSC/PAL composite video
CVBS on BNC connector
DVI-D
• Formats all single-link DVI digital formats up to 165 Mhz, per DVI 1.0 specification
• All dual-link DVI formats up to 330 Mhz
• EDID version 1.3 compatible - HDCP version 1.4 compatible
HD-15 VGA
•
Formats: NTSC/PAL composite on green, NTSC/PAL Y/C video with bi-level sync on Y only, (Y: Green, C: Red); SD YPbPr
with bi-level sync; HD YPbPR with tri-level sync per SMPTE 274; RGBHV/RGBS/RGsB computer video with bi-level sync
• EDID version 1.3 compatible
HDMI (type A)
•
Formats: RGB and YCbCr at 4:4:4, YCbCr at 4:2:2, per HDMI 1.4 specification; resolutions up to 2,048 x 1,080p @ 60Hz
and 1,920 x 1,200p @ 60 Hz
• EDID version 1.3 compatible - HDCP version 1.4 compatible
DisplayPort
• Formats: resolutions up to 2,560 x 1,600 @ 60Hz (30 bits) per DisplayPort 1.1a
• HDCP version 1.4 compatible
OTHER
Genlock
Analog ref input/loop/output on BNC connectors; bi-level and blackburst at SD and tri-level at HD or locked to any input
Remote control
• USB 1.1
• Ethernet RJ-45, 10/100 Mbps autosense
• Computer, tablet, smartphone, or external Encore or ScreenPRO-II controller via Ethernet link.
• Control functions include: source input configuration, output format selection, test pattern selection, transition
effect selection and control
Dimensions
• Height: 4.4 cm (1.75 in) - 1 RU rackmount
• Width: 43.2 cm (17 in) without chassis handles, 48.4 cm (19.06 in) with chassis handles attached
• Depth: 43.4 cm (17.09 in) from front to rear panel, 47 cm (18.51 in) overall
Weight
7,144 kg (15.75 lb)
Input power
Power 100-240 VAC, 47-63 Hz, auto-selecting 2.0A maximum
Environmental
Temperature: 0-40° C; humidity: 0-95% noncondensing
Warranty
Full three-year parts and labor warranty
Technical specifications
11101 Trade Center Drive,
Rancho Cordova, CA 95670, USA
T +1 916 859 2500 - F +1 916 859 2515
Barco nv
Pres. Kennedypark 35,
8500 Kortrijk, Belgium
T +32 56 36 80 47 - F +32 56 36 83 86
email: sales.events@barco.com
Loading...