Page 1
Hardware Reference User
Manual
Model P110 Based Appliances
R591686
Revision 01
Page 2
Barco P110
P ii
Hardware Reference User Manual - P110 Hardware Reference Manual, Document No. R591686_01
www.barco.com
Current Document Version
Title: Model P110 – Hardware Reference Manual
ID No.: R591686
Revision: 01
Date: May 2018
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered trademarks, or copyrights
of their respective holders. All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising for the products or their manufacturers.
Copyright © 2018 by Barco
Die Weitergabe sowie die Vervielfältigung aller Unterlagen, die von uns überlassen werden, deren Verwertung
und Mitteilung ihres Inhaltes an Dritte ist nicht gestattet, soweit dies nicht ausdrücklich zugestanden ist. Urheberrechte, insbesondere auch solche an Software, werden nur insoweit übertragen, als es für die Erreichung
des speziellen Vertragszwecks erforderlich ist. Zuwiderhandlungen können zu Schadensersatz verpflichten.
Alle Rechte aus der Erteilung eines Patents oder der Eintragung eines Gebrauchsmusters verbleiben bei uns.
Copyright © 2018 by Barco
All rights reserved. No part of this document may be copied, reproduced, or translated. It shall not otherwise
be recorded, transmitted, or stored in a retrieval system without the prior written consent of Barco.
Warranty
Please refer to the warranty page on the Barco website:
http://www.barco.com/en/about-barco/legal/warranty-policy.
Page 3
Barco P110 Contents
P I
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
Contents
1 Preface ................................................................................................................................................................ 1
1.1 About this manual ................................................................................................................................................... 1
1.1.1 Styles ........................................................................................................................................................................................................................................ 1
1.1.2 Symbols ................................................................................................................................................................................................................................ 1
1.2 Online manuals ....................................................................................................................................................... 2
1.3 Safety instructions ................................................................................................................................................... 3
1.3.1 Standards ............................................................................................................................................................................................................................. 3
1.3.2 Precautions ....................................................................................................................................................................................................................... 3
1.3.3 Unpacking of devices ............................................................................................................................................................................................. 4
1.3.4 Environment conditions ...................................................................................................................................................................................... 4
1.3.5 General installation instructions ................................................................................................................................................................... 4
1.3.6 Servicing .............................................................................................................................................................................................................................. 4
1.3.7 Cleaning ............................................................................................................................................................................................................................... 4
1.3.8 Repacking .......................................................................................................................................................................................................................... 5
1.4 Delivery volume ...................................................................................................................................................... 5
1.5 Made in information ............................................................................................................................................... 5
1.6 Production date ...................................................................................................................................................... 5
1.7 Importer's contact information............................................................................................................................ 5
2 Model P110 ........................................................................................................................................................ 6
2.1 P110 front view ........................................................................................................................................................ 7
2.1.1 Power button .................................................................................................................................................................................................................. 7
2.1.2 Activity-status LED ..................................................................................................................................................................................................... 7
2.2 P110 rear view ......................................................................................................................................................... 8
2.2.1 Interfaces ............................................................................................................................................................................................................................ 8
2.3 P110 cooling concept ........................................................................................................................................... 9
2.4 Mounting options ................................................................................................................................................. 10
2.4.1 Horizontal setup ....................................................................................................................................................................................................... 10
2.4.2 Vertical setup ............................................................................................................................................................................................................... 11
2.4.3 Mounting brackets.................................................................................................................................................................................................. 12
2.4.4 VESA mount .................................................................................................................................................................................................................. 12
2.4.5 19”mount ......................................................................................................................................................................................................................... 12
2.5 Installing/replacing the hard drive .................................................................................................................... 13
3 Connecting P110 ............................................................................................................................................ 14
3.1 Connecting the display........................................................................................................................................ 14
3.2 Connecting keyboard and mouse ................................................................................................................... 15
3.2.1 Direct connection.................................................................................................................................................................................................... 15
3.2.2 Keyboard and mouse extension (optional) .................................................................................................................................... 15
3.3 Connecting audio ................................................................................................................................................ 16
3.4 Connecting network ........................................................................................................................................... 17
3.5 Connecting power supply .................................................................................................................................. 18
4 Technical data ................................................................................................................................................ 19
5 Disposal information .................................................................................................................................... 20
5.1 Disposal of batteries ............................................................................................................................................ 20
Page 4
Barco P110 Contents
P II
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
5.2 Turkey RoHS compliance .................................................................................................................................. 20
5.3 EurAsian Conformity (EAC) ............................................................................................................................... 20
6 China RoHS compliance .............................................................................................................................. 21
7 Factory Address .............................................................................................................................................. 22
8 Contact ............................................................................................................................................................ 23
Page 5
Barco P110 Preface
P 1
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
1 Preface
This chapter gives general information about how this manual is organized and where to find additional documentation
1.1 About this manual
1.1.1 Styles
The typographic styles in this document are used as follows:
Style
Description
Bold
Labels, menus, and buttons are printed in Bold style.
Blue
Links to other chapters of this manual and to sites on the Internet are printed in blue.
Courier
Names of files and parts of programs are printed in Courier font.
Courier bold
Inputs you are requested to make via the keyboard are printed in
Courier bold
font.
1.1.2 Symbols
The following symbols may be used in this document. Their meaning is explained in the following table.
Symbol Description
This icon specifies passages concerning solely the distributed system.
Failure to observe instructions marked by this icon may result in damage to the equipment!
Failure to observe instructions marked by this icon may result in electrical shock and
danger to personal health!
Failure to observe instructions marked by this icon may result in damage to parts which are
sensitive towards electrostatic charge!
Failure to observe instructions marked by this icon may result in being harmed by sharp
objects!
Failure to observe instructions marked by this icon may result in parts exploding!
Failure to observe instructions marked by this icon may result in hot parts affecting
persons or objects!
Page 6
Barco P110 Preface
P 2
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
Symbol Description
Additional notes.
Further information.
Tips.
Important notes.
1.2 Online manuals
Further documentation about your Barco product can be downloaded from the secured Barco website at
www.barco.com/mybarco.
Page 7
Barco P110 Preface
P 3
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
1.3 Safety instructions
This section describes safety precautions which must be observed when installing and operating a product
from Barco.
1.3.1 Standards
Safety Regulations
P110 is built in accordance with the requirements of international safety standards as
mentioned in the provided Safety Manual.
Additionally it complies with the standard EN-62368-1.
All these safety standards are the information technology equipment standards, including
electrical business equipment.
EN55032/CISPR32 class A MME (MultiMedia Equipment)
P110 is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
Class A ITE (Information Technology Equipment)
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
FCC compliance statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at
his/her own expense.
1.3.2 Precautions
Read the Safety Manual shipped with your product before installing and operating this
device!
Take note of the instructions which have been compiled both to prevent personal injury and
to ensure the device is operated in accordance with its intended use.
Ensure that you understand and follow all safety guidelines, safety instructions, and
warnings mentioned in this document.
Page 8
Barco P110 Preface
P 4
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
This product is intended for professional use only.
It is not intended for household use!
1.3.3 Unpacking of devices
For unpacking, follow the instructions and advice indicated on the outside of the packaging!
1.3.4 Environment conditions
The table below specifies the environment conditions in which the product may be safely operated or stored.
Environment
Operating
Non-Operating
Ambient temperature
0 to 40 deg C / 32 to 104 deg F
-20 to 60 deg C / -4 to 150 deg F
Humidity
5% to 80% non-condensing
5% to 95% non-condensing
Altitude
-60 to 5,000 m / -197 to 6,562 ft
-60 to 10,000 m / -197 to 32,808 ft
The product must be stored and transported in the original packaging in accordance with
the non-operating conditions specified above.
1.3.5 General installation instructions
• Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage to it.
• Do not use this unit near water.
• Do not use any power cords other than the one supplied with your unit. While appearing to be similar,
other power cords have not been safety tested at the factory and must not be used to power the unit. For
a replacement power cord, contact your dealer.
• Slots and openings in the cabinet and the sides are provided for ventilation; to ensure reliable operation of
the unit and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should never be placed near or over a radiator or heat register. This unit should not be placed in
a built-in installation or enclosure unless proper ventilation is provided.
• The maximum recommended ambient temperature for this equipment is 40 C.
• When using the unit in a multi-unit rack assembly or closed assembly, the ambient temperature inside the
assembly may not exceed the maximum rated ambient temperature.
• When installed in a rack, the installation should be such that the amount of air flow required for safe op-
eration of the equipment is not compromised. The mounting of the equipment should be such that no
hazardous condition is achieved due to uneven mechanical loading.
1.3.6 Servicing
P110 does not require any servicing or regular maintenance work other than vacuuming the air vents in the
housing rear and front at regular intervals.
1.3.7 Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Page 9
Barco P110 Preface
P 5
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
1.3.8 Repacking
Keep the original shipping carton and packing material; they will be useful should you ever have to ship your
unit. For maximum protection, repack your set as it was originally packed at the factory.
1.4 Delivery volume
The delivery volume of your P110 controller includes the following items:
P110 controller, preinstalled with software image depending on the configuration
USB recovery stick (depending on configuration)
Power supply
DisplayPort-HDMI adapter (depending on configuration)
Vertical stand and mounting brackets
Part number, MAC address, and serial number labels
Quick Start Guide
Safety Manual
Never leave the USB stick in the USB port!
Booting the system while the USB stick is still connected will restart the installation!
If this case simply wait until the installation is completed.
Your data or customized settings will not be lost.
1.5 Made in information
The made in information is indicated on the product ID label on the product itself.
1.6 Production date
The month and year of production is indicated on the product ID label on the product itself.
1.7 Importer's contact information
To find your local importer, contact Barco directly via www.barco.com, or one of Barco's regional offices via
http://www.barco.com/contact/regional-offices.
Page 10
Barco P110 Model P110
P 6
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
2 Model P110
Based on the model P110 device, Barco is offering various appliances. The notion of an appliance is used in
this context for market or use-case specific software packages running on this model P110 hardware.
P110 controller
This reference manual is mainly about the model P110 hardware!
For the latest information on the appliance check the product page on the secured Barco website
http://www.barco.com/mybarco.
Page 11
Barco P110 Model P110
P 7
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
2.1 P110 front view
P110 front view
2.1.1 Power button
Action Function
Short press
Switches ON, when system was OFF
Initiates SHUTDOWN, when system was ON
Long press
(>10 sec)
FORCED SHUTDOWN, when system was ON
Flashing white Access to SSD
Switching off the P110 will not disconnect all parts from the power supply.
To power down the whole device, short press the power button, then unplug the power
plug when the LED is signalling OFF state.
2.1.2 Activity-status LED
Signalling Function
No light System is switched OFF or has no power
Blue light System is ON
Flashing white Access to SSD
Blinking blue regularly
(50 % on, 50 % off)
System is in sleep mode
Blinking blue
(other than 50 % on, 50 % off)
System is defective, please contact Barco support
Power button
with Activity-status LED
Page 12
Barco P110 Model P110
P 8
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
2.2 P110 rear view
P110 rear view
2.2.1 Interfaces
Port Function
PS/2 (Kbd/Mouse) Legacy PS/2 type keyboard and mouse interface
USB 2.0 4x USB2.0 interfaces.
Device detection
button and LED
For bi-directional identification of device vs mgmt. console
(appliance dependent)
DP
2x Display Port 1.2 interfaces
(HDMI supported via adapters)
COM1 RS323 interface
DVI DVI-D Single Link interface
GbE I210 Gigabit Ethernet interface
GbE I219-LM Gigabit Ethernet interface
USB 3.0 4x USB3.0 interfaces
Line OUT Can also be configured in Bios as Headphone-out
Line IN Can also be configured in Bios as Mic-in or Rear-Speaker-Out
S/PDIF Digital audio interface
DC IN DC power input for the P110
Line IN
USB 3.0
GbE
I210
Device detection
button and LED
DP
S/PDIF
DC
USB 2.0
DVI
COM1
PS/2
GbE
I219-
LM
PS/2
Line OUT
Page 13
Barco P110 Model P110
P 9
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
2.3 P110 cooling concept
The following image shows the air flow into and out of the P110:
Air intake [blue]
Air output [red]
To protect the P110 from overheating, the air vents must be kept free of obstructions!
Page 14
Barco P110 Model P110
P 10
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
2.4 Mounting options
Several mounting options are available.
It depends on the appliance type, whether the required brackets for a specific mounting option are included
or available as an optional accessory.
2.4.1 Horizontal setup
The P110 can be placed on and operated from a desk.
• Turn the device upside down.
• Attach the provided rubber feet to all 4 edges of the device.
P110 bottom view with rubber feet attached
Page 15
Barco P110 Model P110
P 11
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
2.4.2 Vertical setup
Using the vertical stand, the P110 can be placed vertically on any even and stable surface. In this case the
rubber feet will be attached to the bottom of the vertical stand. With the 2 provided TX8 screws, the vertical
stand can be mounted on either side of the P110.
• Put the device on its side.
• Mount the vertical stand on the device using the 2 provided TX8 screws.
• Attach the provided rubber feet to all 4 edges.
Attaching P110 vertical stand
P110 vertical stand with rubber feet attached
To protect the P110 from overheating, the air vents must be kept free of obstructions at all
times!
Page 16
Barco P110 Model P110
P 12
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
2.4.3 Mounting brackets
Using the 2 provided mounting brackets, the P110 can be mounted on top of a surface or below a surface.
P110 Mounting bracket variations
• Use the 4 provided screws to mount the brackets to the device on both sides in the desired layout.
Brackets for mounting P110 on top of a surface
Brackets for mounting P110 below a surface
To protect the P110 from overheating, the air vents must be kept free of obstructions at all
times!
2.4.4 VESA mount
A VESA mount to attach the P110 controller to the back of a display can be purchased separately.
For instructions on the VESA mount please refer to the Quick Start User Guide supplied with the mount.
2.4.5 19”mount
A 19” mount to place the P110 controller inside a server rack can be purchased separately.
For instructions on the 19” rack mount please refer to the Quick Start User Guide supplied with the mount.
Page 17
Barco P110 Model P110
P 13
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
2.5 Installing/replacing the hard drive
P110 controllers feature a flash drive with an SSD storage medium accessible from the bottom. The storage
medium can be swapped by accessing the 2.5" slim type hard drive bay.
Pull out the cable from the
DC in
connection to disconnect the P110 controller from the
power supply before you remove or insert a hard drive.
• Unscrew the cover using a TX8 screw driver.
• Remove the cover.
P110 bottom view with hard drive bay
• Slide the SSD to the rear to disconnect it.
• Remove the SSD from the bay.
Disconnecting the hard drive
• Proceed in reverse order to insert a new drive.
2.5" slim type hard drive bay
Page 18
Barco P110 Connecting P110
P 14
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
3 Connecting P110
To prevent damage of the P110 do not connect your device to the power supply until all
other cables have been connected!
3.1 Connecting the display
P110 controller can be connected to a display via DisplayPort® cables or via HDMI cables by using DisplayPort
®
-to-HDMI adapters.
P110 rear view
DisplayPort®-to-HDMI adapter
Page 19
Barco P110 Connecting P110
P 15
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
3.2 Connecting keyboard and mouse
You can connect a keyboard and a mouse to the USB ports on your P110 controller, if desired.
Keyboard and mouse (or keyboard and mouse extension) are not included in the delivery volume.
3.2.1 Direct connection
Both keyboard and mouse feature a USB interface.
• Plug the USB cables of the devices into the USB ports on the controller (cf. section P110 rear view)
• With wireless keyboard and mouse, proceed accordingly with the respective keyboard/mouse receivers.
Direct keyboard & mouse connection
3.2.2 Keyboard and mouse extension (optional)
A keyboard extension (not provided) allows for a remote positioning of keyboard and mouse. The extension
consists of two extension boxes and two connection cables.
The image below shows the parts and the cabling of the keyboard extension:
Keyboard and mouse extension:
Remote extension box REX [4]
Local extension box LEX [1]
RJ45 connection cable [3]
USB cable [2]
• Plug the keyboard and mouse into the remote extension box.
With wireless keyboard and mouse, proceed accordingly with the respective keyboard/mouse receivers.
• Connect the remote extension box to the local extension box by means of the 20m connection cable.
• Connect the local extension box to one of the USB ports on the controller (cf. section P110 rear view) us-
ing the USB cable provided, featuring a USB-A plug on one end and a USB-B plug on the other.
Page 20
Barco P110 Connecting P110
P 16
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
3.3 Connecting audio
Should you wish to connect audio to your P110, use the audio connectors on the rear (if any).
Note that audio jacks
Line in /Line out are configurable for
Mic in/ Headphone or Rear speaker out.
P110 rear view
Line IN
Line OUT
S/PDIF
Page 21
Barco P110 Connecting P110
P 17
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
3.4 Connecting network
In order to receive streamed videos and control data, and to show application data from other system devices, P110 controllers must be connected to a Local Area Network (LAN).
If you have an existing LAN for your business data, it is important to decide in advance if you will use this LAN
for all data or rather set up a second LAN for the video data. This would be your video network or video LAN.
Prior to connecting your video LAN to the P110 controller(s) for the first time, consult the
respective software user manual for instructions on the required initial configuration!
The latest editions of our user manuals can be found on the secured Barco website
www.barco.com/mybarco.
Network and data cable connections can be made while the system is running. However, if
the network connection is set to use a DHCP server, a reboot may be required.
For details on the DHCP setting, please refer to the software user manual on the secured
Barco website www.barco.com/mybarco.
P110 rear view
LAN connectors (RJ45)
Page 22
Barco P110 Connecting P110
P 18
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
3.5 Connecting power supply
Check the power rating on your outlet before connecting the external power supply unit of
your P110 to the wall outlet or to a power strip. Contact your facilities manager or a qualified
electrician if you are not sure about the type of power supplied to your building.
The P110 is designed to operate with single-phase power systems having a grounded
neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of
power system.
• Plug the DC power connector of the power supply into the DC in connection of your P110
• Tighten the thumb screw.
P110 rear view and external power supply
• Connect the external power supply to a power outlet
(power cable is included in delivery volume for most countries).
For power cords not provided, contact your local dealer.
Make sure power cables are approved for your country!
Page 23
Barco P110 Technical data
P 19
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
4 Technical data
This table provides an overview of the technical data of the P110 device and its built-in components.
CPU
(depending on configuration)
Intel Core i7-6700 processor
Intel Core i5-7500 processor
Intel Core i5-7600 processor
Intel Core i3-7101E processor
Intel Core i3-6100 processor
Memory
(depending on configuration)
2 x 2 GB, PC4-2400, DDR4, SO-DIMM
2 x 4 GB, PC4-2400, DDR4, SO-DIMM
2 x 8 GB, PC4-2400, DDR4, SO-DIMM
2 x 16 GB, PC4-2400, DDR4, SO-DIMM
SSD
2.5" slim type, various capacities
DC power (P110 device)
12Vdc, 9A
Power mains (external power supply) 90-264 V, 2 A, 47-63 Hz
Efficiency (external power supply) 88.8% @115V, 90,2%@ 230V
Inrush current (external power supply) 72.5/174 A for 100/240 VAC max.
Mains power cords
(depending on configuration)
CEE 7
NEMA 5-15
GB 2099
power consumption
Switched off mode
Sleep mode
Idle mode
max. operating mode
< 0.25 W
< 1.5 W
< 11 W
< 120 W
operating conditions
Altitude
0..40°C / 32..104°F at 5.. 80% humidity, non-condensing
-60m to 5,000 m / -197 to 6,562 ft
Non-operating conditions Altitude -20..60°C / -4..150°F at 5..95% humidity, non-condensing
-60 to 10,000 m / -197 to 32,808 ft
Note: The product must be stored and transported in the origi-
nal packaging in accordance with the non-operating conditions
specified above
noise level 32db(A) at 25°C ambient temperature at 100% CPU load
dimensions (h/w/d)
with fixation
with vertical stand
power supply w/o cable
60 mm / 190 mm / 190 mm | 2.36 in / 7.48 in / 7.48 in
60 mm / 228 mm / 190 mm | 2.36 in / 8.98 in / 7.48 in
206 mm / 80 mm / 190 mm | 8.11 in / 3.15 in / 7.48 in
42 mm / 72 mm / 171 mm | 1.65 in / 2.83 in / 6.73 in
Weight P110 unit
Weight power supply
2.1 kg | 4.63 lbs
0.7 kg | 1.54 lbs
Page 24
Barco P110 Disposal information
P 20
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
5 Disposal information
This symbol on the product indicates that, under the European Directive 2012/19/EU governing
waste from electrical and electronic equipment, this product must not be disposed of with
other municipal waste. Please dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
For more information about recycling of this product, please contact your local city office or your municipal
waste disposal service. For details, please visit the Barco website at
http://www.barco.com/en/AboutBarco/weee.
5.1 Disposal of batteries
This product contains batteries covered by the Directive which must be collected and disposed
of separately from municipal waste.
If the battery contains more than the specified values of lead (Pb), mercury (Hg) or cadmium
(Cd), these chemical symbols will appear below the crossed-out wheeled bin symbol.
By participating in separate collection of batteries, you will help to ensure proper disposal and
to prevent potential negative effects on the environment and human health.
5.2 Turkey RoHS compliance
Turkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur
[Republic of Turkey: In conformity with the WEEE Regulation]
5.3 EurAsian Conformity (EAC)
This product complies with the Safety of Low-Voltage Equipment (LVE Technical Regulation
004/2011, CU TR 004/2011) and the Electromagnetic Compatibility of Technical Products
(EMC Technical regulation, CU TR 020/2011).
Page 25
Barco P110 China RoHS compliance
P 21
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
6 China RoHS compliance
Page 26
Barco P110 Factory Address
P 22
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
7 Factory Address
Kontron Europe GmbH
Lise-Meitner-Str. 3-5
D-86156 Augsburg
Germany
Phone +49 (0) 821 4086-01
Fax +49 (0) 821 4086 111
www.kontron.com
Page 27
Barco P110 Contact
P 23
Hardware Reference User Manual - P110, Document No. R591686_01
www.barco.com
8 Contact
Visit Barco at www.barco.com
For Professional Support visit
http://www.barco.com/support
For Sales or other regional contact information visit
http://www.barco.com/contact/regional-offices
Barco N.V.
Beneluxpark 21 – 8500 Kortrijk (Belgium)
Registered Office:
Barco N.V.
Pres. Kennedypark 35 – 8500 Kortrijk (Belgium)
RPR Kortrijk - BE0473191041
Loading...