Barco LC-3001, LCS-42, LCS-47, LC-5621, LCN-42 Specifications

www.barco.com

LC series

Barco’s LC series of High-Resolution LCD displays has been specifically designed for use
in a wide variety of professional applications. The LC family presents crisp, clear and
color-accurate images on 30”, 42”, 47” and 56” screen sizes. Dedicated versions with
HD-SDI inputs are available.

Featuring some of the most advanced LCD technology available today, Barco’s LC series
stands for the ultimate in detail. The LC series consists of a 30" display in WQXGA resolu­tion (2560x1600 pixels), a 42” and 47” display in native full high definition (1920x1080
pixels) and a 56” display in quad full high definition (3840x2160 pixels).

A series of High-Resolution LCD displays

Your benefits:

• High brightness

• High contrast, even in high ambient

light environments

• High resolution and pixel density

• Frame lock and genlock functionality

• Low power consumption

• Long lifetime

The allround display

Barco’s high-definition LCD technology can be found in many

various types of control rooms and studios worldwide. From

process control centers to broadcast environments, control

room operators value Barco’s LC series for a host of reasons.

Broadcasting

The LC series’ large size and outstanding video quality make it an ideal dis­play solution for studio backdrop applications and broadcast control rooms,
where multiple video inputs need to be monitored. A dedicated calibration
sensor and software allow to configure any display to a target color tem­perature, gamma and brightness, and match multiple displays to these tar­gets. The 42” and 47" displays’ fanless design keeps the background noise
below the audible noise level. Optional single-link HD-SDI inputs are avail­able for 42” and 47” displays. For high-quality distribution of video sources,
the 30”, 42” and 47” displays can be combined with Barco’s multiviewer
product family or Networked Broadcast Monitoring Systems. Last but not
least, Barco’s 30”, 42” and 47” displays are configured for the lowest pos­sible impact on system latency.

Utilities and process control centers

Barco’s high-resolution LCD displays offer an ideal personal wall solution
for process control centers. Operators benefit from a large display surface
without having to compromise on image quality or accuracy of the SCADA
or GIS application. The high pixel density of the 30” and 56” displays pres­ents the ultimate detail in any graphical application.

Traffic and surveillance

Barco’s LC series displays are being used in many traffic and surveillance cen­ters worldwide. They provide the perfect overview display solution to help
viewers reduce response times and create better conditions for collaborative
decision making. With its high pixel density and size, the 56” Quad HD can
display high-quality video signals with razor sharp image quality. It also has
sufficient pixels to show various GPS and GIS maps. Last but not least, the
size of the 56” Quad HD allows to have multiple applications shown simulta­neously for ergonomically friendly individual or group viewing.

Command and Control environments

High-quality displays can significantly improve the speed and quality of
command decisions. Barco’s high-definition LCD displays are widely used
in Command & Control applications, where a Common Operational Picture
is needed. The LC series’ wide viewing angle perfectly allows video con­ferencing and collaboration with multiple viewers. High-density informa­tion can be viewed in perfect detail.

Utilities and process control centersCommand and Control environmentsBroadcasting

Traffic & surveillance

© USAF - Brian Ferguson

The ultimate in detail. The summit of comfort.

Ultra-high resolution

Barco’s LC series of high-resolution
displays are able to show large
amounts of data in ultimate detail. Any
input source can be shown pixel-on­pixel, which avoids unnecessary
scaling artifacts often found on
lower-resolution displays. The

30" display in WQXGA (2560x1600)
resolution, the 42” and 47” displays in

native full high definition

(1920x1080 pixels) and the 56”
display in quad full high definition

(3840x2160 pixels) deliver

bright and crisp images

that do full justice to

high-resolution

graphics and

video.

Faster response time

Thanks to its extremely fast response
time (6.5 ms gray to gray), the LC
series reproduces fast-moving action
scenes with vivid accuracy.

SOURCE 1 SOURCE 2 SOURCE 3 SOURCE 4 SOURCE 5

SOURCE 8 SOURCE 9 SOURCE 10 SOURCE 11 SOURCE 12

SOURCE 15 SOURCE 16 SOURCE 17 SOURCE 18 SOURCE 19

SOURCE 22

SOURCE 23

PREVIEW

PROGRAM

SOURCE NAME

Source 1

Source 2

Source 3

Source 4

Source 5

Source 6

Source 7

Source 8

Source 9

Source 10

Source 11

Source 12

Source 13

Source 14

Source 15

Source 16

Source 17

Source 18

Source 19

Source 20

Source 21

Source 22

Source 23

Wide viewing angle

The wide viewing angle (176°) and
large surface are very beneficial in
collaborative environments where
detailed information is viewed by
multiple participants.

Configurable ambient light sensor

For optimal viewing comfort under
varying light conditions, the 42” and
47” displays feature an ambient light
sensor that can be configured to
switch the backlights to a lower level
when the ambient light has dropped
below a user-defined threshold.

Integrated optical stabilization

The 30" and 56" displays feature an
integrated optical stabilization sensor
which ensures that the light output
remains stable at all times.

Picture in Picture (PIP)
Picture and Picture (PAP)

The 42” and 47” displays are able to
present two images - in any mix of
data and video - next to each other or
as Picture-in-Picture. This allows the
audience to display more information
at once in a much more dynamic way.

Size and position of the Picture-in-

Picture are easily

configurable.

Configurable ambient light sensor

The ultra-high resolution allows much more data

to be shown. You will see brilliantly clear images

with maximum detail.

SOURCE 6 SOURCE 7

SOURCE 13 SOURCE 14

SOURCE 20 SOURCE 21

Picture-in-Picture

Picture-and-Picture

One source on one screen

Color calibration

Using Barco’s dedicated calibration
software and sensor, the color
temperature, brightness and gamma
can be adjusted to an absolute target
with small error. Correct color targets
are important for good color judging,
display wall uniformity as well as for
backdrop applications.

FrameLock and Genlock
functionality

Barco’s LC series displays automatically
lock to the input frequency of the
connected source in order to play in
phase-sync and frame-sync with the
input signal (50-60 Hz). Since no frame
rate conversion is done, the motion is
smooth, without judder. In case of
backdrop applications, the camera will
also run in sync with the display when
the si gnal source is genlocked with the
studio camera. No phase shift will be
visible in the recording.

Low latency

Barco’s 30”, 42” and 47” displays are
configured for the lowest possible impact
on system latency.

Low noise, fanless system

The fanless design of the 42” and 47”
displays keeps the noise level below
21 dB(A), which is perfect to meet the
needs of small rooms, such as TV news
rooms or board rooms.

Excellent broadcast
reproduction

Integrated mounting interfaces
according to VESA standards allow for
easy wall or ceiling installation.

Wrong color balance results in a bluish image in
backdrop applications (left picture).
3200K color adjustment results in a perfect color
balance (right picture).

Worry-free operation
and installation

VESA mounting structure for easy
installation

Integrated mounting interfaces
according to VESA standards allow
for easy wall or ceiling installation.
Table stands and mounting devices
are optional.

Control & diagnostics

With extensive control and diagnostic
functions through RS232, the LCD
displays can be easily controlled,
both on or off site or in real-time
with a simple touch of a button.

Control and diagnostics

Wide variety of inputs

Adhering to the most stringent
professional standards, the 42” and
47” dislays offer a wide variety of
inputs for the majority of video and
data sources: analog and digital RGB,
S-video, composite and component
video, as well as optional SDI/HDSDI
autosynching input (one board with
two inputs and loop-through of the
active one).

High-resolution desktop solution

Barco’s 30” 101 dpi display and 56”
78 dpi display provide a unique high­resolution desktop solution. The
displays’ large size is suitable for one
or two operators on the workstation
desk and allows the overview and
sharing of many desktop applications.
The high pixel count allows showing
much more information than
conventional displays, and the high
pixel density gives ultimate detail
to any graphical application.

Mechanical LC-3001

LCN-42 and LCS-42 LCN-47 and LCS-47 LC-5621

Cooling

Fans for optimized cooling

Low noise level 21 dB(A)/ Low noise level 21 dB(A)/ Fans for optimized cooling
fanless cooling fanless cooling

Hanging

VESA 100 x 100

VESA MIS F, 600, 200, 8 VESA MIS F, 600, 200, 8 VESA (mounts and table
(mounts and table (mounts and table stands are optional)
stands are optional) stands are optional)

Active screen diagonal

29.8” (756.3mm)

42” (1,067 mm) 47” (1,194 mm) 56.2” (1427.5 mm)

Active screen area

641.3 x 400.8 mm

934 x 527 mm 1,047.4 x 592.4 mm 1,244 x 700 mm

(25.24” x 15.78”)

(36.77” x 20.75”) (41.24” x 23.32”) (48.98” x 27.56”)

Dimensions (WxHxD)

697 x 456 x 107 mm

1,026 x 619 x 123.7 mm 1,139.4 x 684.4 x 126.2 mm 1,341 x 797 x 132 mm

(27.4 x 17.9 x 5.91”)

(40.39” x 24.37” x 4.87”) (44.86” x 26.94” x 4.97”) (52.8” x 31.38” x 5.20”)

Weight

15kg (33lbs)

29.5 kg (65.1 lb) 40.2 kg (88 lbs) 61 kg (135 lbs)

Front glass Standard Optional Optional Optional

Technical specifications LC series

www.barco.com

Ref. no. R599991 - September 2007
The information and data given are typical for the equipment described.
However any individual item is subject to change without any notice.
The latest version of this product sheet can be found on www.barco.com.
The product is subject to warranty of 2 years.
Warranty for image retention is subject to certain conditions of use.

Barco - Belgium

Noordlaan 5, 8520 Kuurne

Phone (32) (56) 368211

E-mail [e-mail]

LCD Panel

LC-3001

LCS-42 and LCS-47 LCN-42 and LCN-47 LC-5621

Technology

TFT LCD

TFT LCD TFT LCD TFT LCD

Resolution

2560x1600

1920x1080 (full HD) 1920x1080 (full HD) 3840 x 2160

Lifetime

50,000h average

50,000h average 50,000h average 50,000h average

Visual characteristics

Colors

16.8 million

16.8 million 16.8 million 16.8 million

Color gamut

76% NTSC

76% NTSC 76% NTSC 75% NTSC

Aspect ratio

16:10

16:9 16:9 16:9

Viewing angle (CR > 20)

176°/176°

176°/176° 176°/176° 176°/176°

Response time

6 ms

6.5 ms 6.5 ms 6.5 ms

Dots per inch

101 dpi

52 dpi for 42’’; 46 dpi for 47’’ 52 dpi for 42’’; 46 dpi for 47’’ 78 dpi

Color adjustment

6500K

3200K, 5400K, 6500K, 9300K, 3200K, 5400K, 6500K, 9300K, 3200K, 5400K, 6500K, 9300K,

User (R,G,B sliders) User (R,G,B sliders) User (R,G,B sliders)

Contrast ratio

650:1

1500:1 1500:1 1200:1

Brightness

250cd/m

2

500cd/m

2

500cd/m

2

500cd/m

2

Light sensor

Backlight stabilization sensor

Ambient light sensor for automatic dimming Backlight stabilization sensor

Connectivity and control

(HD-)SDI input

Not applicable

2 separate inputs with loop

Not applicable Not applicable

through of active inputs HD-SDI –

480i, 576i, 720p, 1080i at 50,

59.94 and 60 Hz, and 1080p at

23.98, 24, 25, 29.97 and 30Hz

Standard inputs

2 DVI inputs

DVI; VGA (D15); S-Video; Composite Video; Two Dual-link DVI inputs

Component video (YPbPr, YCbCr)

Supported resolutions

2560x1600

On composite, S-video and component inputs: 3840x2160 (1920x2160

PAL-Secam 576i, NTSC 480i on each DVI input)

On DVI and VGA inputs: VESA: VGA, SVGA,

XGA, WXGA, SXGA, SXGA+, UXGA;

SMPTE-296M(1280 x 720p); SMPTE-274M

(1920 x 1080i and 1920 x 1080p)

Control

– RS232 control

– RS232 control (with loop-through); – RS232 control;

–

DDL WMMV

Baud-rate: 115200, 38400, 19200 or 9600 Baud-rate: 115200

–

On Screen Display (OSD)

– On Screen Display (OSD) – On Screen Display (OSD)

– IR remote control – IR remote control

Audio

Not applicable

Audio pre-amp input module (excl. speakers) Not applicable

Picture-in-Picture

Not applicable

PIP source max. 110 MHz Not applicable

Power requirements

Input

90V-264V (45Hz-65Hz)

85V-264V (50Hz-60Hz) 85V-264V (50Hz-60Hz)

Power consumption

150W

234W max for 42’’ 450W

303W max for 47’’

Environmental

Operating temp (min-max)

10° to 40°C (50° to 85°F)

5° to 40°C (41° to 104°F) 5° to 35°C (41° to 95°F)

Humidity

Max. 80%

Max. 85% Max. 85%

Approvals

Regulation compliance

CE, UL, FCC

CE, UL, FCC, TÜV, CCC CE, UL, FCC (from Q4 2007)