Barco cDG80-DL, cDR67-DL, cDR+67-D, cDR+80-DL, mDR+50-DL Brochure & Specs

OverView D

Barco’s O

cutting edge DLPTMtechnology into 50",

67" and 80” display wall systems that

are designed and optimized for use in

a 24/7 mission critical environment.

The Barco designed projection engine

provides a set of unique features. The

result is an unrivaled DLPTMrear

projection system with outstanding

picture quality, reliability and ease of

use.

VERVIEW D series integrate

DLPTMprojection series

Superior display quality

• latest high contrast DLPTMtechnology

• optimal brightness, contrast, color uniformity and large viewing angles

• Optical Dimming to reach equal luminance values without contrast loss or color

depth on all screens

• Dynamic Feedback technology to maintain constant luminance over time

Reliability and lifetime serviceability

• dual redundant lamp allows you to rely 100% on your Barco display wall

• engineered for ease of maintenance

• dustfree overpressure design

• access to operation and service adjustments through IR remote control and an

On-Screen Display

• easy lamp replacement from the rear of the system while system runs

• Barco's Lamp-Lease Program allows you to efficiently control operational costs

Flexibility

• designed to form display walls of any size, in a linear or curved setup

• requires minimal installation depth

• innovative modular concept

• optimized for mission critical operation

• engineered for use in 24/7 applications

• building block for fully integrated solution

• image quality optimization based upon ergonomical studies

• low total cost of ownership

Selected for best ergonomic viewing of display wall application

Screens General Full viewing angle Half gain angle (hor.|ver.)

• HVA High contrast/Excellent viewing 180° 35° | 35°

• XB High contrast/High brightness 180° 32° | 9°

Full viewing angle: angle at which the screen content is still viewable, regardless brightness
Half gain angle: angle at which brightness drops to half of on-axis brightness

High-precision screen

• provides high-contrast, even in bright

ambient light

• type of screen is selected based on

overall environmental conditions and
operational requirements

• excellent visibility under any viewing

angle

• patented stitch solution provides

seamless solution on 67" and 80"

• patented screen modules with easy

mounting and narrow screen gap

• all screens are double element

screens to avoid hotspotting on each
display

• optional 50" seamless screens

without bezels with ZeroGap
technology are available

Optical dimming with dynamic
feedback

A patent pending optical dimming
system in combination with a dynamic
feedback control loop results in a
uniform image across the wall and
maintains the brightness over time.
This feature allows:

• independent brightness control of

each module without loss of contrast
or color depth

• equal brightness, contrast and color

depth across the display wall

• equal luminance of the display wall

across time

• ergonomic dimming of full display

wall for day and night operation

Features of the OverView projection module

Barco Control Rooms designed a projection module based on an innovative

modular approach. The concept of having a separate projection unit and

illumination unit is unique and results in an easy to maintain projection

cube with superior picture quality. The built in lamp redundancy reduces

operational costs and ensures a permanent image. The optical dimmer

guarantees equal brightness and contrast across the display wall and keeps

the performance of the display constant over time.

50" OverView mDG50-DL, OverView mDR50-DL, OverView mDR+50-DL

Luminance (cd/m2 | ftL) HVA XB (5)

• (S)XGA 100W 195 | 55 660 | 190

+

• SXGA

• Seam Size Screen mullion none

• Operating Conditions

Humidity Up to 80% non condensing
Temperature 10°C-40°C|50°F-105°F

• Storing Conditions 0°C-40°C|32°F-105°F

120W 240 | 70 810 | 235
100W 225 | 65 775 | 224
120W 275 | 82 950 | 275

interscreen gap < 0.8 mm (8) or 0 mm ZeroGap technology (9)

OVERVIEW mDG50-DL

VERVIEW mDR50-DL

O
O

VERVIEW mDR

+

50-DL

67" OverView cDG67-DL, OverView cDR67-DL, OverView cDR+67-DL

Luminance (cd/m2 | ftL) HVA XB (5)

• (S)XGA 100W 100 | 30 380 | 110

120W 120 | 35 450 | 130
100W 120 | 35 450 | 130

• SXGA

+

120W 145 | 42 575 | 155

• Seam size Screen mullion none

interscreen gap < 0.2 mm - patented stitch concept

• Operating Conditions

Humidity (7) Up to 90% non condensing
Temperature (7) 10°C-40°C|50°F-105°F

• Storing Conditions 0°C-40°C|32°F-105°F

80" OverView cDG80-DL, OverView cDR+80-DL

Luminance (cd/m2 | ftL) HVA XB (5)

• XGA 100W 75 | 22 275 | 80

120W 85 | 25 325 | 95
100W 85 | 25 325 | 95

• SXGA

+

120W 100 | 29 375 | 112

• Seam size Screen mullion none

interscreen gap < 0.2 mm - patented stitch concept

• Operating Conditions

Humidity (7) Up to 90% non condensing
Temperature (7) 10°C-40°C|50°F-105°F

• Storing Conditions 0°C-40°C|32°F-105°F

High brightness & 3200K option

XGA HVA

• 50" 200W, 3200K 200 | 59

200W, 6500K 400 | 117

• 67" 200W, 3200K 100 | 29

200W, 6500K 200 | 58

(1) Hot Standby-image reaches 50% brightness level, (2) lamp manufacturer specs @ IEC 61947-1 test conditions,

3

) ANSI points, (4) sdi input upon request, (5) upon special request, (6) modular screens upon request, (7) depend-

(
ing on wall dimension, (8) @ 22°C and 50% relative humidity, (9) optional on XGA, SXGA+model only

Fan module

Luminance guidelines

• all luminance values are given for

on-axis viewing. The 50% luminance
value will be present when viewing
under the half gain angles (see
‘screens table’)

• all luminance values are measured at

6500 K color temperature, normally
applied in control rooms for natural
lighting conditions

• luminance at other color

temperatures can be communicated
upon request

Luminance guidelines backdrop
applications

• for backdrop applications often a color

temperature of 3200 K is required.

OVERVIEW cDG67-DL

VERVIEW cDR67-DL

O
O

VERVIEW cDR

+

67-DL

Illumination unit

Projection unit

A dedicated solution with retractable
3200 K/6500 K filter cartridge is
available for the XGA product

Projection unit

• single-chip DLPTMtechnology

• XGA (1024x768) SXGA (1280x1024)

and SXGA

+

(1400x1050) resolution

• modular projection unit

• high contrast

• ergonomic luminance

• large color gamut spans the

EBU/SMPTE color triangle

• easy to adjust

• easy maintenance

• removable color wheel cartridge

• integrated optical dimmer

Illumination unit

• modular illumination unit

• removable for repair work

• can be replaced without requiring

geometrical readjustment

• contains all high power supplies

• integrated redundant lamp system

• active system to reduce tolerancing

on brightness

• dual redundant lamp drivers

• choice between high brightness

version with a 120W lamp or an
economical version with lower cost of
ownership with a 100W lamp (option)

• 200W lamp option XGA for high-

brightness applications with wide
viewing angle requirements

Multi Input Module

(optional)

• autosyncing

• DVI-I

• RGB on 15 pol sub-D

(RGB/Hsync/Vsync)

- resolution VGA-UXGA

- pixelclock: 12 MHz-140 MHz

- horizontal frequency: 12 KHz-100 KHz

• video: 2x cinch, PAL, NTSC, SECAM

• s-video: mini-Din 4 Pol

• DVI-D out

• input selection

- channel selection by input selection
tool

- can be set in automatic source
switch-over for redundancy of
sources

- via graphical user interface

W

D1

H

R

W

OVERVIEW cDG80-DL

VERVIEW cDR

O

+

80-DL

H

R

W

H

R

Structure OVERVIEW mDG50-DL OVERVIEW mDR50-DL OVERVIEW cDG67-DL OVERVIEW cDR67-DL OVERVIEW cDG80-DL

OVERVIEW mDR+50-DL OVERVIEW cDR+67-DL OVERVIEW cDR+80-DL

W 1,000 mm | 39.4" 1,000 mm | 39.4" 1,368 mm | 53.9" 1,335 mm | 52.6" 1,600 mm | 63"
H 750 mm | 29.5" 800 mm | 31.5" 1,026 mm | 40.4" 1,068 mm | 42" 1,200 mm | 47.2"
R 50" nominal 50" nominal 67" nominal 67" nominal 80" nominal
D1 568 mm | 22.4" 568 mm | 22.4" 810 mm | 31.9" 810 mm | 31.9" 965 mm | 38.0"
D2 664.5 mm | 26.2" 721 mm | 28.4" 942 mm | 37.1" 950 mm | 37.4" 1,098 mm | 43.2"
Aspect Ratio 4:3 5:4 4:3 5:4 4:3
SH (1) 875 - 1,000 - 1,200 mm 875 - 1,000 - 1,200 mm 1,288 mm | 50.7" 1,288 mm | 50.7" 1,288 mm | 50.7"
SH min 455 mm | 17.9" 455 mm | 17.9" 622 mm | 24.5" 668 mm | 26.3" 537 mm | 21.1"
Weight (excl. structures) 62 kg 68 kg 123.4 kg 123.4 kg 137.5 kg

for updated product information see “Visual Displays”at

(1) standard. Other support heights possible upon request

www.barcocontrolrooms.com/en/products

D2

SH

D2

D1

SH

D2

D1

SH

Redundancy concept

• dual lamp: 100% availability of your

display wall

• 3 modes:

Hot standby: 2nd lamp is on, i.e. the
switching time in case of lamp failure
of the master lamp is virtually zero
Cold standby: 2nd lamp is switched
off during operation, i.e. it will only
be activated when master lamp
failure is detected – switching takes
around 30 seconds

1 Projection unit
2 Illumination unit
3 Power supply
4 Fan module
5 Mirror
6 Structure
7 Screen module or stitched screen

Auto Switch mode: ensuring
controlled, balanced aging of the
lamps

• no image loss in hot stand-by

• lamp change without direct operator

intervention

• lamp changes can be planned

• lower operational costs

• failed lamp can be replaced while

other lamp generates image

• standard Dual DVI-D allows

connection of two simultaneous
sources or controllers for full
redundancy upon failure of one
source or controller

Specifications OverView D

General 100W 120W 200W

• Resolution XGA SXGA (8) SXGA

+

XGA SXGA (8) SXGA

+

XGA

OverView DG OverView DR OverView DR+OverView DG OverView DR OverView DR+OverView DG

• DMD-chip 1024x768 1400x1050 1400x1050 1024x768 1400x1050 1400x1050 1024x768

0.7" 0.95" 0.95" 0.7" 0.95" 0.95" 0.7"
DDR LVDS LVDS DDR LVDS LVDS DDR
±12º ±12º ±12º ±12º ±12º ±12º ±12º

• Number of pixels used 0.79 M pix 1.31 M pix 1.47 M pix 0.79 M pix 1.31 M pix 1.47 M pix 0.79 M pix

• Pixelshape Square

• MTBF of DMD typ. 650,000 hours

• Life time of DMD typ. 100,000 hours

• Lamp modes Cold Standby, Hot Standby, Auto Switch (all with two lampdrivers)

• Lamp switching time (1)

After lamp switch 0.5 seconds
After lamp failure 1.5 seconds

• AC Input Voltage 100-240 VAC, 60-50 Hz

• Power (W)

Cold standby 190 210 290 (5)
Hot standby 285 325 520

• Heat dissipation (BTU/h)

Cold standby 650 715 1200 (5)
Hot standby 975 1110 1850

• Lamp life (2) 2 x 10,000 hours 2 x 6,000 hours 2 x 2,000 hours

• Brightness

@ 6500 K

(7) 550 625 700 675 715 800 1125

• Contrast (Typ.) 1300:1 1600:1 1600:1 1300:1 1600:1 1600:1 1300:1

• Brightness uniformity (3) 90%

Automated lamp alignment after lamp change for optimized color uniformity and brightness
Active patent pending mechanism for brightness tolerancing reduction

• Optical Dimmer Optical Dimming with Dynamic Feedback

Brightness locking 50-100% optical dimming range, without color shift, loss of contrast and loss of colordepth
Image equalization All display modules can be set to equal brightness and contrast

• Color EBU Color Triangle

White point 6500 K (4) 6500 K (4) 6500 K (4) 3200 K (5) 6500 K (4) 6500 K (4) 3200 K (5)

6500 K (4) 6500 K (4)

• Signal input

Standard Dual DVI-D
Optional on XGA model DVI-D in/out with support for dual XGA input timing 1024x1536
Optional OverView D Multi input module: DVI-D, DVI-I, Multi Sync RGB input (VGA upto UXGA), Video Input (PAL, NTSC, SECAM) (6)

• Genlocking Yes

Genlock Frequency Range 48-62 Hz

(1) Hot Standby-image reaches 50% brightness level, (2) lamp manufacturer specs @ IEC 61947-1 test conditions, (3) ANSI points, (4) 6500 K, but can be set to other values,
(5) special 3200 K option for backdrop, (6) sdi input upon request, (7) Typ. ANSI Lumen, (8) based upon SXGA of emulation OVERVIEW DR+model

for updated product information see “Visual Displays”at
www.barcocontrolrooms.com/en/products

Ref. no. R599664 September 2007

Barco Control Rooms is an ISO 9001 registered company.
The information and data given are typical for the equipment described. However any individual item is subject to change without any notice.
The latest version of this product sheet can be found on www.barcocontrolrooms.com
DLP™ technology by Texas Instruments offers crystal clear images with superior quality. DLP is a trademark of Texas Instruments.

www.barcocontrolrooms.com

Barco - Belgium

Noordlaan 5, 8520 Kuurne

Phone (32) (56) 36-8211

E-mail [e-mail]

Germany Phone (49) (721) 6201-0

USA Phone (1) [phone]

Brazil Phone (55) (11) 3842-1656

Japan Phone (81) (3) 5762-8720

Hong Kong Phone [phone]