Page 1
60” ESTELLE ACRYLIC
Cat. No.
SLIPPER TUB
L: 60”
W: 30”
H: 21” (from floor) short end
31” (from floor) tall end
12” (from bottom of tub) short end
22” (from bottom of tub) tall end
Water Depth:11-½” to overflow
The
following is recommended for
ATS60 slipper tubs:
•Faucets: part #4602, 4604 or 7082
Freestanding Bath Supplies: #4502
•Leg tub drain: part #5599
ATS60
F
eatures:
►Inside finish is either white or bisque to
match outside color
►Pre-drilled overflow hole
►No faucet holes with flat rim
►Outside is textured fiberglass reinforced
polyester coated with two-part epoxy
► Aluminum ball and claw feet
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
T
ub Colors
W
H White BQ Bisque
Foot Finishes
BQ Bisque BN Brushed Nickel
BL Black ORB Oil Rubbed Bronze
PB Polished Brass PN Polished Nickel
CP Polished Chrome WH White
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
Ga
llon Capacity : 33
Shipping Weight: 120 lbs.
Empty Weight: 62 lbs.
Filled Weight: 338 lbs.
Dimensions of fixture are nominal and specifications subject to change without notice.
9/26/2018
0
P
847•244•1234 www.barclayproducts.com
Page 2
TUB FILLER WITH
Cat. No.
DIVERTER, HANDSHOWER
SHOWERHEAD & RING
eatures:
F
►Elephant spout has a flow rate of 3.7 GPM
►Telephone style handshower with cradle and 59” hose
►Backflow preventor in handshower
►Sunflower showerhead has flow rate of 2.44 GPM
►Includes 62” riser and rectangular shower rod
►6” Elbow mounts included
►¼ Turn ceramic disc cartridges
►7” Centers for deck mounting installation on acrylic
or cast iron tubs
►Flow rate for handshower is 2.5 GPM
►Available with porcelain lever (4063-PL)
or metal cross (4063-MC) handles
►Includes wall support 4195WS
►Can be used with freestanding supplies (#4502-PL) or
straight bath supplies (#5577) depending on application
4063
Shower Rod: 48”W x 24”D
Wall Support: 10”
Ceiling Support: 30”
Spout Length: 5-¾”
hes:
Finis
BP Polished Brass SN Brushed Nickel
CP Polished Chrome ORB Oil Rubbed Bronze
PN Polished Nickel
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
9/19/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
FREESTANDING
Cat. No.
BATH SUPPLIES
4502-PL
Features:
►5” Shaft included ►0.800” Outer diameter
►Stops included ►0.595” Inner diameter
►½” Pipe thread inlet ►0.090” Thickness of wall
►¾” Flare outlet
►Wall support assemblies included
►Porcelain lever handles
►IAPMO approved
►Available in 5 finishes
►Should not be used with leg tubs that have factory
drilled holes.
Finishes:
CP Polished Chrome
PN Polished Nickel
BP Polished Brass
ORB Oil Rubbed Bronze
SN Brushed Nickel
H: 30” (30-½” with nut)
Wall Support
Assembly
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...