Page 1
61” COLUMBUS
Cat. No.
CAST IRON
DOUBLE ROLL TOP TUB
L: 60”
W: 30-⅛”
H: 22-½” (from floor to top of tub)
17-⅜” (from bottom of tub to top of tub)
Water depth: 17-⅜” to top of tub
Water depth: 13-⅝” to overflow
CTDRN61
Feat
ures:
►Inside finish is white enamel
►Cast Iron imperial feet
►Tub exterior is white (expoxy)
►Pre-drilled overflow hole
►No faucet holes
►Continuous rolled rim
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
Foot Finishes:
UF Unfinished
BL Painted Black
BQ Painted Bisque
PB Polished Brass
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
CP Polished Chrome
WH Painted White
PN Polished Nickel
SN Brushed Nickel
ORB Oil Rubbed Bronze
The following is recommended for
CTDRN tubs without faucet holes:
•Faucet: part #4602, 4604 or 7082
•Rigid, freestanding supplies: part #4502
•Leg tub drain: part #5599
llon Capacity: 60
Ga
Shipping Weight: 480 lbs.
Empty Weight: 300 lbs.
Filled Weight: 801 lbs.
9/26/2018
0
P
847•244•1234 www.barclayproducts.com
Page 2
TUB RIM MOUNT
Cat. No.
FILLER WITH
HANDSHOWER
4601
Fea
tures:
►Brass construction
►Elephant spout length is 5-¾”
►Flow rate is 3.7 GPM
►Available with porcelain lever (4601- PL) or metal
cross lever handles (4601-MC)
►Telephone handshower with cradle and hose
►Handshower flow rate 2.5 GPM
►Handshower includes backflow preventer
►6” Elbow mounts included
►IAPMO approved
►7” Centers for deck mounting on acrylic or cast iron tubs
►¼ Turn ceramic disc cartridges
►To be used with straight bath supplies, Part #5577
Finis
hes:
6” Elbow Mounts
B
P Polished Brass PN Polished Nickel
CP Polished Chrome ORB Oil Rubbed Bronze
SN Brushed Nickel
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
FREESTANDING
Cat. No.
BATH SUPPLIES
4502-PL
Features:
►5” Shaft included ►0.800” Outer diameter
►Stops included ►0.595” Inner diameter
►½” Pipe thread inlet ►0.090” Thickness of wall
►¾” Flare outlet
►Wall support assemblies included
►Porcelain lever handles
►IAPMO approved
►Available in 5 finishes
►Should not be used with leg tubs that have factory
drilled holes.
Finishes:
CP Polished Chrome
PN Polished Nickel
BP Polished Brass
ORB Oil Rubbed Bronze
SN Brushed Nickel
H: 30” (30-½” with nut)
Wall Support
Assembly
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...