Page 1
60” BARTLETT
CAST IRON
ROLL TOP TUB
L: 60-¾”
W: 30-½”
H: 24” (from floor to top of tub)
19-¼” (from bottom of tub to top of tub)
Cat. No.
CTR60
F
eatures:
►Inside finish is white enamel
►Cast Iron ball and claw feet
►Tub exterior is white (epoxy)
►3-⅜” centers in tub wall
►Non-skid strips
►Continuous rolled rim
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
Polished Chrome
Finishes:
Foot
nfinished
UF U
BL Painted Black
BQ Painted Bisque
PB Polished Brass
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
CP
WH Painted White
PN Polished Nickel
SN Brushed Nickel
ORB Oil Rubbed Bronze
following is recommended for
The
CTR60 tubs with faucet holes:
•Tub wall-mounted faucets for hand-held
showers: part# 4022, 4025 or 4035
•Tub wall-mounted faucets for use with
risers: part# 4001,4013, 4023, 4030 or 4031
•Double offset bath supplies: part #5576
•Leg tub drain: part #5599
•Complete shower unit: part# 4124, or 4143
n Capacity: 40
Gallo
Shipping Weight: 500 lbs.
Empty Weight: 287 lbs.
Filled Weight: 621 lbs.
Dimensions of fixture are nominal and may vary within the range of tolerance established by ANSI standard A112.19.2. Dimensions and
specifications subject to change with out notice.
/26/2018
09
P
847•244•1234 www.barclayproducts.com
Page 2
RECTANGULAR
Cat. No.
SHOWER UNIT
L: 48” D: 24”
L: 54” D: 24”
4190
Fea
tures:
►Rectangular shower rod is 3/4” solid brass tubing
►Washerless diverter bathcock
►3-3/8” Centers for tub wall mount installation
►1/4 Turn compression stems
►Includes ceiling and wall support assemblies
►Supports are adjustable by cutting
►Flow rate is 4 GPM
►Metal lever handles
►Polished chrome and brass have plastic showerhead
►Brushed Nickel, Polished Nickel and Oil Rubbed Bronze
have a metal showerhead
►For use with #5576 double offset supplies (Not Included)
►Available with 48” or 54” shower rod
(#4190-48, #4190-54)
►Finish varies by size
SIZE FINISH
48” x 24” CP, BN, ORB,PB, PN
54” x 24” PB, CP
Riser Height: 62”
Faucet Width: 5-1/4”
Wall Support: 10”
Ceiling Support: 30”
Finishes:
CP
Polished Chrome PB Polished Brass
BN Brushed Nickel PN Polished Nickel
ORB Oil Rubbed Bronze
Dime
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
DOUBLE OFFSET
Cat.No.
BATH SUPPLIES
H: 24”
5576
Features:
►For use with faucets mounted to the tub wall
►No Stops
►½” Compression inlet
►¾” Compression outlet
►0.500” Outer diameter
►0.440” Inner diameter
►0.030” Thickness of the wall
►IAPMO approved
►Availble in 5 finishes
Finishes:
CP
Polished Chrome PN Polished Nickel
PB Polished Brass BN Brushed Nickel
ORB Oil Rubbed Bronze
Compliance Certification
Meets or exceeds the following
specifications: ASME-A112
(and 19.6M) for Vitreous china
fixtures. ASME 112.19.9M for fire
clay fixtures.
OD: ½”
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...