Page 1
55” ANTONIO
CAST IRON
ROLL TOP TUB
L: 54”
W: 30-⅛”
H: 24” (from floor to top of tub)
19-¼” (from bottom of tub to top
of tub)
Cat. No.
CTRH54
atures:
Fe
►Inside finish is white enamel
►Tub exterior is white (epoxy)
►3-⅜” centers in tub wall
►Continous rolled rim
►Pre-drilled overflow hole
►Cast Iron ball and claw feet
►Non-skid strips
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
CP
Foot
Finishes:
UF Un
finished
BL Painted Black
BQ Painted Bisque
PB Polished Brass
Polished Chrome
WH Painted White
PN Polished Nickel
SN Brushed Nickel
ORB Oil Rubbed Bronze
The following is recommended for
CTRH54 tubs with faucet holes:
•Tub wall-mounted faucets or hand-held
showers: part# 4022, 4025, 4035
•Tub wall-mounted faucets for use with
risers: part# 4001, 4013, 4023, 4030, 4031
•Double offset bath supplies: part #5576
•Leg tub drain: part #5599
•Complete shower unit: part# 4124, 4143
llon Capacity: 36
Ga
Shipping Weight: 475 lbs.
Empty Weight: 247 lbs.
Filled Weight: 547 lbs.
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
09
/26/2018
P 847•244•1234 www.barclayproducts.com
Page 2
TUB WALL MOUNTED
Cat. No.
FAUCET WITH
HAND SHOWER
4025
F
eatures:
►Old style spigot
►Handheld shower with cradle and 59” Hose
►Backflow preventer on handshower
►3-⅜” Centers on tub wall
►Centers can be adjusted out to 9” with use of
part #4501 (Swivel arms)
►1/4 Turn ceramic disc cartridges
►Flow rate is 3.8 GPM
►Flow rate for handshower is 1.8 GPM
►To be used with double offset bath supplies:
part #5576
►Can be used with freestanding bath supplies
part #4502-PL
Finis
hes:
W: 9”
H: 12-½”
Depth from back of faucet to front of
faucet: 7-½”
Depth from wall to front of faucet: 5-½”
Polished Chrome PN Polished Nickel
CP
BP Polished Brass ORB Oil Rubbed Bronze
SN Brushed Nickel
nsions are nominal and may vary. Dimensions and speciications subject to change without notice.
Dime
0
9/19/2018
P 847•244•1234 www.barclayproducts.com
Page 3
DOUBLE OFFSET
Cat.No.
BATH SUPPLIES
H: 24”
5576
Features:
►For use with faucets mounted to the tub wall
►No Stops
►½” Compression inlet
►¾” Compression outlet
►0.500” Outer diameter
►0.440” Inner diameter
►0.030” Thickness of the wall
►IAPMO approved
►Availble in 5 finishes
Finishes:
CP
Polished Chrome PN Polished Nickel
PB Polished Brass BN Brushed Nickel
ORB Oil Rubbed Bronze
Compliance Certification
Meets or exceeds the following
specifications: ASME-A112
(and 19.6M) for Vitreous china
fixtures. ASME 112.19.9M for fire
clay fixtures.
OD: ½”
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...