Page 1
BROCTON
68” CAST IRON
ROLL TOP TUB
L: 68”
W: 30-⅛”
H: 24-¾” (from floor to top of tub)
19-¼” (from bottom of tub to top of tub)
Cat. No.
CTR67
eatures:
F
►Inside finish is white enamel
►Cast Iron ball and claw feet available in 8
finishes or unfinished
►Tub exterior is white (epoxy)
►3-⅜” centers in tub wall
►Non-skid strips
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
Foo
t Finishes:
UF Un
finished
BL Painted Black
BQ Painted Bisque
PB Polished Brass
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
Polished Chrome
CP
WH Painted White
PN Polished Nickel
SN Brushed Nickel
ORB Oil Rubbed Bronze
following is recommended for CTR67
The
tubs with faucet holes:
•Tub wall-mounted faucets or hand-held
showers: part# 4022, 4025, 4035
•Tub wall-mounted faucets for use with
risers: part# 4001, 4013, 4023, 4030, 0431
•Double offset bath supplies: part #5576
•Leg tub drain: part #5599
•Complete shower unit: part# 4124, 4143
Gallon Capacity: 57
Shipping Weight: 502 lbs.
Empty Weight: 309 lbs.
Filled Weight: 785 lbs.
09
/26/2018
P 847•244•1234 www.barclayproducts.com
Page 2
CODE RECTANGULAR
Cat. No.
SHOWER UNIT
4198
eatures:
F
►Rectangular shower rod is ¾” solid brass tubing
►Code spout is 4” above handles
►3⅜” Centers for tub wall mount installation
►Compression stems
►Flow rate is 4 GPM
►Metal lever handles
►Polished Chrome and Polished Brass have plastic showerhead
►Brushed Nickel, Polished Nickel and Oil Rubbed Bronze have
a metal showerhead
►Includes ceiling and wall support assemblies
►Supports adjustable by cutting
►Available with 48” (#4198-48) or 54” (#4198-54) shower rod
►Finish varies by size
Finishes:
CP Polished Chrome
BN Brushed Nickel
PB Polished Brass
PN Polished Nickel
ORB Oil Rubbed Bronze
SIZE FINISH
48” x 24” CP, BN, ORB,PB, PN
54” x 24” PB, CP
Shower Rod:
L: 48” D: 24”
L: 54” D: 24”
Riser Height: 56”
Wall Support: 10”
Ceiling Support: 30”
Spout Over-hang: 1¾”
Faucet Body Width: 5½”
Dime
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
DOUBLE OFFSET
Cat.No.
BATH SUPPLIES
H: 24”
5576
Features:
►For use with faucets mounted to the tub wall
►No Stops
►½” Compression inlet
►¾” Compression outlet
►0.500” Outer diameter
►0.440” Inner diameter
►0.030” Thickness of the wall
►IAPMO approved
►Availble in 5 finishes
Finishes:
CP
Polished Chrome PN Polished Nickel
PB Polished Brass BN Brushed Nickel
ORB Oil Rubbed Bronze
Compliance Certification
Meets or exceeds the following
specifications: ASME-A112
(and 19.6M) for Vitreous china
fixtures. ASME 112.19.9M for fire
clay fixtures.
OD: ½”
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...