Page 1
BROCTON
68” CAST IRON
ROLL TOP TUB
L: 68”
W: 30-⅛”
H: 24-¾” (from floor to top of tub)
19-¼” (from bottom of tub to top of tub)
Cat. No.
CTR67
eatures:
F
►Inside finish is white enamel
►Cast Iron ball and claw feet available in 8
finishes or unfinished
►Tub exterior is white (epoxy)
►3-⅜” centers in tub wall
►Non-skid strips
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
Foo
t Finishes:
UF Un
finished
BL Painted Black
BQ Painted Bisque
PB Polished Brass
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
Polished Chrome
CP
WH Painted White
PN Polished Nickel
SN Brushed Nickel
ORB Oil Rubbed Bronze
following is recommended for CTR67
The
tubs with faucet holes:
•Tub wall-mounted faucets or hand-held
showers: part# 4022, 4025, 4035
•Tub wall-mounted faucets for use with
risers: part# 4001, 4013, 4023, 4030, 0431
•Double offset bath supplies: part #5576
•Leg tub drain: part #5599
•Complete shower unit: part# 4124, 4143
Gallon Capacity: 57
Shipping Weight: 502 lbs.
Empty Weight: 309 lbs.
Filled Weight: 785 lbs.
09
/26/2018
P 847•244•1234 www.barclayproducts.com
Page 2
RECTANGULAR
Cat. No.
SHOWER UNIT WITH
SIDE WALL SUPPORT
4192
atures:
Fe
►Rectangular shower rod is 3/4” solid brass tubing
►Washerless diverter bathcock
►3-3/8” Centers for tub wall mount installation
►1/4 Turn compression stems
►Flow rate is 4 GPM
►Metal lever handles
►Polished Chrome and Brass have plastic showerheads
►Brushed Nickel, Polished Nickel and Oil Rubbed Bronze
have a metal showerhead
►Includes ceiling and wall support assemblies
►Side wall support fully reversible (Left or Right)
►Supports adjustable by cutting
►For use with #5576 double offset supplies (Not Included)
►Available with 48” (#4192-48) or 54” (#4192-54)shower rod
►Finishes varies by size
SIZE FINISH
48” x 24” CP, BN, ORB,PB, PN
54” x 24” PB, CP
Shower Rod:
L: 48” D: 24”
L: 54” D: 24”
Riser Height: 62”
Faucet Width: 5-1/4”
Wall Support: 18”
Ceiling Support: 30”
hes:
Finis
CP Polished Chrome
PB Polished Brass
BN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Dime
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
DOUBLE OFFSET
Cat.No.
BATH SUPPLIES
H: 24”
5576
Features:
►For use with faucets mounted to the tub wall
►No Stops
►½” Compression inlet
►¾” Compression outlet
►0.500” Outer diameter
►0.440” Inner diameter
►0.030” Thickness of the wall
►IAPMO approved
►Availble in 5 finishes
Finishes:
CP
Polished Chrome PN Polished Nickel
PB Polished Brass BN Brushed Nickel
ORB Oil Rubbed Bronze
Compliance Certification
Meets or exceeds the following
specifications: ASME-A112
(and 19.6M) for Vitreous china
fixtures. ASME 112.19.9M for fire
clay fixtures.
OD: ½”
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...