Page 1
55” ANTONIO
CAST IRON
ROLL TOP TUB
L: 54”
W: 30-⅛”
H: 24” (from floor to top of tub)
19-¼” (from bottom of tub to top of tub)
Cat. No
.
CTRN54
F
eatures:
►Inside finish is white enamel
►Cast Iron ball and claw feet
►Tub exterior is white (epoxy)
►No faucet holes
►Non-skid strips
►Continuous rolled rim
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
Finishes:
Foot
finished
UF Un
BL Painted Black
BQ Painted Bisque
PB Polished Brass
P Polished Chrome
C
WH Painted White
PN Polished Nickel
SN Brushed Nickel
ORB Oil Rubbed Bronze
The following is recommended for
CTRN54 tubs without faucet holes:
•Faucet: part #4602, 4604 or 7082
•Rigid, freestanding supplies: Part #4502
•Leg tub drain: part #5599
Ga
llon Capacity: 36
Shipping Weight: 475 lbs.
Empty Weight: 247 lbs.
Filled Weight: 547 lbs.
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
09
/26/2018
P 847•244•1234 www.barclayproducts.com
Page 2
TUB WALL MOUNT Cat. No.
FILLER WITH 4602
HANDSHOWER
Features:
►Brass construction
►Elephant spout length is 5-¾”
►Flow rate is 3.7 GPM
►Available with porcelein lever (4602-PL) or
metal cross handles (4602-MC)
►Telephone handshower with cradle and hose
►Handshower flow rate 2.5 GPM
►Handshower includes backflow preventer
►Swivel mounts adjust centers from 3” to 12”
►Faucet centers are 7” without swivel mounts
►For tub wall mount installation
►¼ turn ceramic disc cartridges
►To be used with double offset bath supplies, Part #5576
►This faucet can also be used with rigid freestanding
supplies, Part #4502 with adjustable swivel mounts removed
P 847•244•1234 www.barclayproducts.com
11/18/20
Finishes:
BP Polished Brass SN Brushed Nickel
CP Polished Chrome PN Polished Nickel
ORB Oil Rubbed Bronze
Adjustable Swivel Mounts
Dimensions are nominal and may vary. Dimensions and specifications subject to change without notice.
Page 3
FREESTANDING
Cat. No.
BATH SUPPLIES
4502-PL
Features:
►5” Shaft included ►0.800” Outer diameter
►Stops included ►0.595” Inner diameter
►½” Pipe thread inlet ►0.090” Thickness of wall
►¾” Flare outlet
►Wall support assemblies included
►Porcelain lever handles
►Available in 5 finishes
►Should not be used with leg tubs that have factory
drilled holes.
Finishes:
CP Polished Chrome
PN Polished Nickel
BP Polished Brass
ORB Oil Rubbed Bronze
SN Brushed Nickel
H: 30” (30-½” with nut)
Wall Support
Assembly
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
1/13/2020
1
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Brass Construction
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
1
1/18/2020
P
847•244•1234 www.barclayproducts.com
Page 5
RECTANGULAR
Cat. No.
SHOWER ROD
S i z e Finish
48” L X 24”D PB, CP, SN, PN or ORB
54” L X 24”D PB, CP or SN
4150
Features:
¾” Solid Brass Tubing
►
►Includes 30” Ceiling Support Assembly
►Includes 10” End Wall Support Assembly
►⅝” OD Supports are Adjustable by Cutting
►Finish varieas by size
►Available In 2 Sizes: 48”(#4150-48), and 54”
( #4150-54)
►All Rods Come As Four Pieces
Finishes:
End Wall Support
Assembly
CP Polished Chrome
SN Brushed Nickel
PB Polished Brass
ORB Oil Rubbed Bronze
PN Polished Nickel
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...