Page 1
60” BARTLETT
CAST IRON
ROLL TOP TUB
L: 60-¾”
W: 30-½”
H: 24” (from floor to top of tub)
19-¼” (from bottom of tub to top of tub)
Cat. No.
CTR60
F
eatures:
►Inside finish is white enamel
►Cast Iron ball and claw feet
►Tub exterior is white (epoxy)
►3-⅜” centers in tub wall
►Non-skid strips
►Continuous rolled rim
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
Polished Chrome
Finishes:
Foot
nfinished
UF U
BL Painted Black
BQ Painted Bisque
PB Polished Brass
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
CP
WH Painted White
PN Polished Nickel
SN Brushed Nickel
ORB Oil Rubbed Bronze
following is recommended for
The
CTR60 tubs with faucet holes:
•Tub wall-mounted faucets for hand-held
showers: part# 4022, 4025 or 4035
•Tub wall-mounted faucets for use with
risers: part# 4001,4013, 4023, 4030 or 4031
•Double offset bath supplies: part #5576
•Leg tub drain: part #5599
•Complete shower unit: part# 4124, or 4143
n Capacity: 40
Gallo
Shipping Weight: 500 lbs.
Empty Weight: 287 lbs.
Filled Weight: 621 lbs.
Dimensions of fixture are nominal and may vary within the range of tolerance established by ANSI standard A112.19.2. Dimensions and
specifications subject to change with out notice.
/26/2018
09
P
847•244•1234 www.barclayproducts.com
Page 2
Tub Wall Mount
Cat. No.
Faucet
W: 9”
D: 9-¼
H: 9-1/8”
4035-ML-XX
Feat
►Gooseneck spout
►Metal lever handles
►¼” Turn compression stems
►Spout reach is 4-¾”
►Flow rate is 3.6 GPM
►3-⅜” Centers for tub wall mount installation
►To be used with double offset bath supplies, Part #5576
F
inishes:
CP P
ORB Oil Rubbed Bronze
BN Brushed Nickel
PN Polished Nickel
PB Polished Brass
ures:
olished Chrome
nsions and specifications subject to change without notice.
Dime
9/19/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
DOUBLE OFFSET
Cat.No.
BATH SUPPLIES
H: 24”
5576
Features:
►For use with faucets mounted to the tub wall
►No Stops
►½” Compression inlet
►¾” Compression outlet
►0.500” Outer diameter
►0.440” Inner diameter
►0.030” Thickness of the wall
►IAPMO approved
►Availble in 5 finishes
Finishes:
CP
Polished Chrome PN Polished Nickel
PB Polished Brass BN Brushed Nickel
ORB Oil Rubbed Bronze
Compliance Certification
Meets or exceeds the following
specifications: ASME-A112
(and 19.6M) for Vitreous china
fixtures. ASME 112.19.9M for fire
clay fixtures.
OD: ½”
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...