Page 1
CADMUS
68” CAST IRON
ROLL TOP TUB
WITH 7” DECK HOLES
L: 68”
W: 30-½”
H: 23-¼” (from floor to top of tub)
18-⅝” (from bottom of tub to top
of tub)
Cat. No.
CTR7H67
Features:
Features:
►Inside finish is white enamel
►Inside finish is white enamel
►Cast Iron ball and claw feet available in 8 finishes
►Cast Iron ball and claw feet available in 8 finishes
or unfinished
or unfinished
►Tub exterior is white (epoxy)
►Tub exterior is white (epoxy)
►7” centers in tub deck
►7” centers in tub deck
►Non-skid strips
►Non-skid strips
►Feet attached and leveled before shipment
►Feet attached and leveled before shipment
►Tub thoroughly inspected before shipment
►Tub thoroughly inspected before shipment
Polished Chrome
Finishes:
Foot
finished
UF Un
BL Painted Black
BQ Painted Bisque
PB Polished Brass
CP
WH Painted White
PN Polished Nickel
SN Brushed Nickel
ORB Oil Rubbed Bronze
The following is recommended for
CTR7H67 tubs with deck holes:
•Rim-mounted faucet: part #4601 or 4201
•Straight bath supplies: part #5577
•Leg tub drain: part #5599
•Complete shower unit: part #4063
Ga
llon Capacity: 57
Shipping Weight: 502 lbs.
Empty Weight: 309 lbs.
Filled Weight: 785 lbs.
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
Dimensions of fixture are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. Dimensions and
specifications subject to change without notice.
09
/26/2018
P 847•244•1234 www.barclayproducts.com
Page 2
TUB FILLER WITH
Cat. No.
DIVERTER, HANDSHOWER
SHOWERHEAD & RING
eatures:
F
►Elephant spout has a flow rate of 3.7 GPM
►Telephone style handshower with cradle and 59” hose
►Backflow preventor in handshower
►Sunflower showerhead has flow rate of 2.44 GPM
►Includes 62” riser and rectangular shower rod
►6” Elbow mounts included
►¼ Turn ceramic disc cartridges
►7” Centers for deck mounting installation on acrylic
or cast iron tubs
►Flow rate for handshower is 2.5 GPM
►Available with porcelain lever (4063-PL)
or metal cross (4063-MC) handles
►Includes wall support 4195WS
►Can be used with freestanding supplies (#4502-PL) or
straight bath supplies (#5577) depending on application
4063
Shower Rod: 48”W x 24”D
Wall Support: 10”
Ceiling Support: 30”
Spout Length: 5-¾”
hes:
Finis
BP Polished Brass SN Brushed Nickel
CP Polished Chrome ORB Oil Rubbed Bronze
PN Polished Nickel
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
9/19/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
STRAIGHT
Cat.No.
BATH SUPPLIES
5577
Features:
►For use with faucets mounted to the tub deck
►No stops
►½” Compression inlet
►¾” Compression outlet
►Bottom flange 2-½” diameter
►0.500” Outer diameter
►0.400” Inner diameter
►0.030” Thickness of the wall
►Available in 5 Finishes
Fi
nishes:
C
P Polished Chrome
SN Brushed Nicke
BP Polished Brass
ORB Oil Rubbed Bronze
PN Polished Nickel
ompliance Certification
C
Meets or exceeds the following
specifications: ASME-A112
(and 19.6M) for Vitreous china
fixtures. ASME 112.19.9M for fire
clay fixtures.
H: 24”
OD: ½”
or Dimensions:
Interi
Basin Interior: 13” x 11 7/8”
Basin Depth: 7 1/2”
Mount bolts height: 30”
Mount holes cc: 6”
Spout hole: 1 3/8”
U
se on concrete floors requires special installation. We recommend using a plumbing proffessional.
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...