Page 1
60” BARTLETT
CAST IRON
ROLL TOP TUB
L: 60-¾”
W: 30-½”
H: 24” (from floor to top of tub)
19-¼” (from bottom of tub to top of tub)
Cat. No.
CTR60
F
eatures:
►Inside finish is white enamel
►Cast Iron ball and claw feet
►Tub exterior is white (epoxy)
►3-⅜” centers in tub wall
►Non-skid strips
►Continuous rolled rim
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
Polished Chrome
Finishes:
Foot
nfinished
UF U
BL Painted Black
BQ Painted Bisque
PB Polished Brass
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
CP
WH Painted White
PN Polished Nickel
SN Brushed Nickel
ORB Oil Rubbed Bronze
following is recommended for
The
CTR60 tubs with faucet holes:
•Tub wall-mounted faucets for hand-held
showers: part# 4022, 4025 or 4035
•Tub wall-mounted faucets for use with
risers: part# 4001,4013, 4023, 4030 or 4031
•Double offset bath supplies: part #5576
•Leg tub drain: part #5599
•Complete shower unit: part# 4124, or 4143
n Capacity: 40
Gallo
Shipping Weight: 500 lbs.
Empty Weight: 287 lbs.
Filled Weight: 621 lbs.
Dimensions of fixture are nominal and may vary within the range of tolerance established by ANSI standard A112.19.2. Dimensions and
specifications subject to change with out notice.
/26/2018
09
P
847•244•1234 www.barclayproducts.com
Page 2
TUB WALL-MOUNTED
Cat. No.
FAUCET WITH
HAND SHOWER
4022
eatures:
F
►Code gooseneck spout
►Telephone style handheld shower with cradle and 59” hose
►Backflow preventor in handshower
►¼ turn ceramic disc cartridges
►3-⅜” centers for tub wall mount installation
►Centers can be adjusted out to 9” with use of
part #4501 (Swivel arms)
►Flow rate is 3.68 GPM
►Flow rate for handshower is 1.8 GPM
►IAPMO approved
►To be used with double offset bath supplies:
part #5576
►Can be used with freestanding bath supplies
Part #4502
W: 9”
D: 9-½”
H: 12”
Finishes:
Polished Brass PN Polished Nickel
BP
CP Polished Chrome ORB Oil Rubbed Bronze
SN Brushed Nickel
Dime
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
09
/19/2018
P
847•244•1234 www.barclayproducts.com
Page 3
DOUBLE OFFSET
Cat.No.
BATH SUPPLIES
H: 24”
5576
Features:
►For use with faucets mounted to the tub wall
►No Stops
►½” Compression inlet
►¾” Compression outlet
►0.500” Outer diameter
►0.440” Inner diameter
►0.030” Thickness of the wall
►IAPMO approved
►Availble in 5 finishes
Finishes:
CP
Polished Chrome PN Polished Nickel
PB Polished Brass BN Brushed Nickel
ORB Oil Rubbed Bronze
Compliance Certification
Meets or exceeds the following
specifications: ASME-A112
(and 19.6M) for Vitreous china
fixtures. ASME 112.19.9M for fire
clay fixtures.
OD: ½”
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...