Page 1
IMOGENE ACRYLIC
Cat. No.
SLIPPER TUB
L: 67”
W: 29-½”
H: 24” (from floor) short end
30” (from floor) tall end
18” (from bottom of tub) short end
24” (from bottom of tub) tall end
Water Depth: 11-½” to overflow
ATS67
F
eatures:
►Outside is textured fiberglass reinforced
polyester coated with two-part epoxy
►Aluminum ball and claw feet
►No faucet holes
►Pre-drilled overflow hole
►Feet are attached and leveled before shipment
►Tub is thoroughly inspected before shipment
Foot Finishes:
BL Black
BQ Bisque
BP Polished Brass
CP Polished Chrome
BN Brushed Nickel
ORB Oil Rubbed Bronze
PN Polished Nickel
WH White
The following is recommended for
ATS67 slipper tubs:
•Faucets: part #4602, 4604 or 7082
•Use with Freestanding Bath Supplies:
part #4502
•Leg tub drain: part #5599
Ga
llon Capacity : 50
Shipping Weight: 150 lbs.
Empty Weight: 100 lbs.
Filled Weight: 518 lbs.
Custom Colors Available (inside of tub is always white enamel):
Painted bathtubs are considered “special order” and are not returnable
$160 Bisque or Black $250 Designer Color
Dimensions of fixture are nominal and specifications subject to change without notice.
9/26/2018
0
P
847•244•1234 www.barclayproducts.com
Page 2
TUB FILLER WITH
Cat. No.
DIVERTER, HANDSHOWER
SHOWERHEAD & RING
eatures:
F
►Elephant spout has a flow rate of 3.7 GPM
►Telephone style handshower with cradle and 59” hose
►Backflow preventor in handshower
►Sunflower showerhead has flow rate of 2.44 GPM
►Includes 62” riser and rectangular shower rod
►6” Elbow mounts included
►¼ Turn ceramic disc cartridges
►7” Centers for deck mounting installation on acrylic
or cast iron tubs
►Flow rate for handshower is 2.5 GPM
►Available with porcelain lever (4063-PL)
or metal cross (4063-MC) handles
►Includes wall support 4195WS
►Can be used with freestanding supplies (#4502-PL) or
straight bath supplies (#5577) depending on application
4063
Shower Rod: 48”W x 24”D
Wall Support: 10”
Ceiling Support: 30”
Spout Length: 5-¾”
hes:
Finis
BP Polished Brass SN Brushed Nickel
CP Polished Chrome ORB Oil Rubbed Bronze
PN Polished Nickel
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
9/19/2018
0
P
847•244•1234 www.barclayproducts.com
Page 3
FREESTANDING
Cat. No.
BATH SUPPLIES
4502-PL
Features:
►5” Shaft included ►0.800” Outer diameter
►Stops included ►0.595” Inner diameter
►½” Pipe thread inlet ►0.090” Thickness of wall
►¾” Flare outlet
►Wall support assemblies included
►Porcelain lever handles
►IAPMO approved
►Available in 5 finishes
►Should not be used with leg tubs that have factory
drilled holes.
Finishes:
CP Polished Chrome
PN Polished Nickel
BP Polished Brass
ORB Oil Rubbed Bronze
SN Brushed Nickel
H: 30” (30-½” with nut)
Wall Support
Assembly
Use on concrete floors requires special installation. We recommend using a plumbing proffessional.
nsions are nominal and may vary. Dimensions and specifications subject to change without notice.
Dime
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Page 4
LEG TUB
Cat. No.
DRAIN
5599
Features:
►Twist-and-lift stopper
►Includes deep escutcheon
►Height adjustable 15”-18”
►Depth adjustable 12”-14”
►Includes deep escutcheon
►IAPMO approved
►Available in 5 Finishes
Finishes:
C
P Polished Chrome
BP Polished Brass
SN Brushed Nickel
PN Polished Nickel
ORB Oil Rubbed Bronze
Escutcheon Height: 1-¼”
Dime
nsions and specifications subject to change without notice.
9/21/2018
0
P
847•244•1234 www.barclayproducts.com
Loading...